Numerical Investigation of the Influence of Pulsed Laser Deposited Tin Thin Film Morphology on Deformation Inhomogeneities

• Autorzy: Perzyński K. , Zych D. , Sitko M. , Madej Ł.

Identyfikatory

DOI

10.24425/amm.2020.132810

• Języki publikacji: EN

Abstrakty

EN

In vestigation of influence of TiN thin film morphology on deformation inhomogeneities is an overall subject of the research. Numerical modelling approach that was selected for the study is based on the digital material representation concept, which gives an opportunity to directly replicate columnar microstructure morphology of an investigated thin film. Particular attention in this paper is put on the discussion of the influence of cellular automata neighbourhood on thin-film digital morphologies and their further deformation behaviour. Additionally, an evaluation of representativeness aspects of the digital models, in particular, the analysis of the influence of a number of columns, their dimensions and variations in their properties on the material behaviour during compression tests is also presented. The non-periodic boundary conditions are assumed during the investigation. Obtained data in the form of equivalent stress distributions as well as homogenized stress-strain curves from analyzed case studies are presented and discussed within the paper.

Słowa kluczowe

EN

thin films; pulsed laser deposition; digital material representation; homogenization; finite element method

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2020
• Tom: Vol. 65, iss. 2
• Strony: 713--720
• Opis fizyczny: Bibliogr. 30 poz., fot., rys., tab.

Twórcy

autor

Perzyński K.

• AGH University of Science and Technology, Department of Modelling and Information Technology, Al. Mickiewicza 30, 30-059, Kraków, Poland

autor

Zych D.

• AGH University of Science and Technology, Department of Modelling and Information Technology, Al. Mickiewicza 30, 30-059, Kraków, Poland

autor

Sitko M.

• AGH University of Science and Technology, Department of Modelling and Information Technology, Al. Mickiewicza 30, 30-059, Kraków, Poland

autor

Madej Ł.

• AGH University of Science and Technology, Department of Modelling and Information Technology, Al. Mickiewicza 30, 30-059, Kraków, Poland

Bibliografia

• [1] H. Fujioka, Pulsed laser deposition (PLD), in: Handbook of Crystal Growth, Elsevier (2015).
• [2] R. Major, J. Bonarski, J. Morgiel, B. Major, E. Czarnowska, R. Kustosz et al., Surf. and Coat. Tech. 200, 6340-6345 (2006).
• [3] M. Kot, Ł. Major, J. Lackner, Mater Des. 51, 280-286 (2013).
• [4] K. Perzynski, L. Major, L. Madej, M. Pietrzyk, Arch. of Metall. and Mat. 56, 393-399 (2011).
• [5] R. P. Sugavaneshwar, S. Ishii, T. D. Dao, A. Ohi, T. Nabatame, T. Nagao, ACS Photonics, (2018).
• [6] M. N. Gadalla, A. S. Greenspon, M. Tamagnone, F. Capasso, E. L. Hu, ACS Appl. Nano Mater. 2, 3444-3452 (2019).
• [7] C.-C. Chang, J. Nogan, Z.-P. Yang, W. J. M. Kort-Kamp, W. Ross, T. S. Luk et al., Sci. Rep. 9, 15287 (2019).
• [8] J. R. Greer, W. C. Oliver, W. D. Nix, Acta Mater. 53, 1821-1830 (2005).
• [9] H. Fei, A. Abraham, N. Chawla, H. Jiang, J. Appl. Mech. 79, 061011 (2012).
• [10] J. Schwiedrzik, R. Raghavan, A. Bürki, V. LeNader, U. Wolfram, J. Michler et al., Nat. Mater. 13, 740-747 (2014).
• [11] W. C. Oliver, G. M. Pharr, J. Mater. Res. 19, 3-20 (2004).
• [12] M. Kopernik, A. Milenin, Arch. of Civi. and Mech. Eng. 14,269-277 (2014).
• [13] X. Zhao, Z. Xie, P. Munroe, Mat. Sci. and Eng. A. 528, 1111-1116 (2011).
• [14] L. A. Piana, E. A. Pérez R, R. M. Souza, A. O. Kunrath, T. R. Strohaecker, Thi. Sol. Fil. 491, 197-203 (2005).
• [15] W. Wen, A. A. Becker, W. Sun, J. Mater. Sci. 52, 12553-12573 (2017).
• [16] K. Perzyński, Ł. Madej, Key Eng. Mater. 504-506, 1293-1298 (2012).
• [17] K. Perzynski, G. Cios, G. Szwachta, D. Zych, M. Setty, P. Bala et al., Thi. Sol. Fil. 673, 34-43 (2019).
• [18] J. M. Lackner, Surf. and Coat. Tech. 200, 1439-1444 (2005).
• [19] R. Eason, Pulsed laser deposition of thin films: applications-led growth of functional materials, Wiley (2006).
• [20] R. Messier, A. P. Giri, R. A. Roy, J. Vac. Sci. Technol. A. 2, 500-503 (1984).
• [21] J. A. Thornton, J. Vac. Sci. Technol. 11, 666-670 (1974).
• [22] J. A. Thornton, Annu. Rev. Mater. Sci. 7, 239-260 (1977).
• [23] L. Madej, Arch. of Civ. and Mech. Eng. 17, 839-854 (2017).
• [24] P. Marynowski, H. Adrian, M. Głowacki, J. Mater. Eng. Perform.28, 4018-4025 (2019).
• [25] L. Madej, Comp. Meth. in Mat. Sci. 10, 143-155 (2010).
• [26] K. Perzynski, G. Cios, G. Szwachta, D. Zych, M. Setty, P. Bala et al., Proc. Eng. 207,2191-2196 (2017).
• [27] L. Madej, L. Sieradzki, M. Sitko, K. Perzynski, K. Radwanski, R. Kuziak, Comp. Mater. Sci. 77, 172-181 (2013).
• [28] J. Jian, J. H. Lee, Y. Liu, F. Khatkhatay, K. Yu, Q. Su et al., Mat. Sci. and Eng.: A. 650, 445-453 (2016).
• [29] D. Craciun, N. Stefan, G. Socol, G. Dorcioman, E. McCumiskey, M. Hanna et al., Appl Surf Sci. 260, 2-6 (2012).
• [30] J. Szyndler, Ł. Madej, Comp. Mater. Sci. 96, 200-213 (2015).

Uwagi

EN

1. This study was funded by the National Science Centre under the 2015/17/D/ST8/01278 project. Numerical calculations have been performed with the use of the PLGrid Infrastructure.

PL

2. Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).