Selection of linear filter elements parameters for measuring of voltage and currents components of direct and inverse order

• Autorzy: Bjelić S. , Marković N. , Jakšić U. , Živanić J.

Warianty tytułu

PL

Dobór parametrów filtru liniowego do pomiaru składowej zgodnej i przeciwnejnapięcia i prądu w sieci elektroenergetycznej

• Języki publikacji: EN

Abstrakty

EN

In the paper is presented the review of control functions of linear filters of symmetric components, in the systems for measuring of symmetric components of voltages and currents in electric networks, composed of impedances with passive R, L, C parameters. The characteristics of process and procedure for determination of parameters of filters elements based on mathematical model of three-phase filter equivalent circuit have been emphasized. The results on behaviour of measuring system with linear filter behaviour obtained in the analysis with application of MATLAB simulation have also been presented.

PL

W artykule przedstawiono przegląd filtrów liniowych składowych symetrycznych, w zastosowaniu do systemów pomiarowych tych składowych prądu i napięcia sieci elektroenergetycznej, zbudowanych z elementów RLC. Opisano wynik działania pomiarów, wykonanych przez podany system, modelu symulacyjnym w programie Matlab.

Słowa kluczowe

EN

measuring; parameter; filter; symmetric component

PL

pomiary; parametry; filtr; składowe symetryczne

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2013
• Tom: R. 89, nr 1a
• Strony: 172--176
• Opis fizyczny: Bibliogr. 9 poz., rys., tab.

Twórcy

autor

Bjelić S.

• Faculty of Technical sciences Kosovska Mitrovica, University of Priština

autor

Marković N.

• Polytechnic School of vocational studies Uroševac, Zvečan

autor

Jakšić U.

• Polytechnic School of vocational studies Zvečan

autor

Živanić J.

• Technical faculty Čačak, University of Kragujevac

Bibliografia

• [1] Marković N., Bjelić S., Jakšić U., Development of new measuring systems based on symmetric components in electric networks, Electronics and Electrical Engineering, The 14th Internacional Conference “Electronics’2010“, T 120 (2010), No. 8(104), 57-62, Journal Citation Reports (JCR), http://www.scientific.thomson.com/index.html) http://www.kobson.nb.rs/kobson.
• [2] Bjelić S., Jakšić U., Marković N., Energetic converters, Kvark Kraljevo, (2010), 99-104, 192-204
• [3] Moran L.A., Fernandez L., Dixon J.W., Wallace R., A Simple and Low-Cost Strategy for Active Power Filters Connected in Cascade, IEEE Trans. Ind. Elect., October (1997), Vol. 44, No. 5, 621-629
• [4] Jeong S.G., Woo M.H., DSP-Based Active Power Filter with Predictive Current Control, IEEE Trans. Ind. Electron., June (1997), Vol. 44, No. 3
• [5] Marković N., Lazarević Z., Bjelić S., Vujičić M., Selection of Parameters for Correction of Asymmetry of Asynchronous Machine according to Procedure Developed in Matrix Method, PLENARY SESSION Proceeding Paper No 1.13, The 15th Internacional Conference on Electronics, Kaunas and Vilnius, Lithuania, Kaunas University of Technology (KTU), May 17-19, (2011)
• [6] Bjelić S., Marković N., Jakšić U., The simplified procedure for calculation of Influence of thermal losses on decrease of technical endurance of electric equipment, 3. Regional Conference on Industrial Energy and Environmental Protection in Southeastern Europe IEEP’11, June 21-25 (2011), Book of abstracts page 28
• [7] MATLAB, Copyright 1984-2002 The Math Works, Version 6.5.0,180913a, June 2, (2000)
• [8] Akagi H., Atoh S., Control Strategy Active Power Filter Using Multiple Voltage Source PWM Converters, IEEE Tran. Ind. Appl., May (1986), Vol. 22, 460-465
• [9] Aredes M., Watanabe E.H., New Control Algorithms for Series and Shunt Three-phase Four-wire Active Power Filters IEEE Trans. Power Deliv., (1995), Vol. 10, No. 3, 1649-1656