PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Numerical study on compression properties of semi-reentrant filled tubular structures

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
In this study, a semi-reentrant structure (SR) filled with different tubular structures, includ- ing tube, triangular and rectangle structures were designed. The tubular structures were perfectly assembled into semi-reentrant cells to avoid swaying in the semi-reentrant cell. The geometric relations and relative density for these structures were established. For the out-of-plane and in-plane compressions, SR filled tubular structures exhibited different de- formation patterns compared to those of SR or pure fillers. A constraint effect was found between the filler tubular and container SR. With fillers contained inside the SR structures, the plateau stresses for three conditions were all promoted compared to those of SR. The best out-of-plane compression resistance occurred in the SR filled rectangle which might be caused by larger interaction areas between the SR and rectangular structures. The (specific) energy absorption of the SR filled tube compressed out-of-plane was the largest. The peak and plateau stress of the SR filled triangle was the largest compared to other structures when compressed in plane due to stability of the triangle. It was found that the plateau stress, energy absorption and specific energy absorption of SR filled triangle was the largest, while that of SR filled rectangle was the lowest.
Rocznik
Strony
233--244
Opis fizyczny
Bibliogr. 20 poz., rys., tab.
Twórcy
autor
  • Sino-European Institute of Aviation Engineering, Civil Aviation University of China, Tianjin, China
autor
  • Sino-European Institute of Aviation Engineering, Civil Aviation University of China, Tianjin, China
  • Institute of Aviation Engineering,, Civil Aviation University of China, China
autor
  • The 18th Research Institute, China Electronics Technology Group Corporation, China
Bibliografia
  • 1. Al Antali A., Umer R., Zhou J., Cantwell W.J., 2017, The energy-absorbing properties of composite tube-reinforced aluminum honeycomb, Composite Structures, 176, 630-639.
  • 2. Davini C., Favata A., Micheletti A., Paroni, R., 2017, A 2D microstructure with auxetic out-of-plane behavior and non-auxetic in-plane behaviour, Smart Materials and Structures, 26, 12, 125007.
  • 3. Dong Z., Li Y., Zhao T., Wu W., Xiao D., Liang J., 2019, Experimental and numerical studies on the compressive mechanical properties of the metallic auxetic reentrant honeycomb, Materials and Design, 182, 108036.
  • 4. Grima J.N., Oliveri N., Attard D., Ellul E., Gatt G., Cicala N., Recca G., 2010, Hexagonal honeycombs with zero Poisson’s ratios and enhanced stiffness, Advanced Engineering Materials, 12, 9, 855-862.
  • 5. Hussein R.D., Dong R., Lu G., Thomson R., 2018, An energy dissipating mechanism for crushing square aluminium/CFRP tubes, Composite Structures, 183, 643-653.
  • 6. Hussein R.D., Ruan D., Lu G., Sbarski I., 2016, Axial crushing behaviour of honeycomb-filled square carbon fibre reinforced plastic (CFRP) tubes, Composite Structures, 140, 166-179.
  • 7. Liu J., Wang Z., Hui D., 2018, Blast resistance and parametric study of sandwich structure consisting of honeycomb core filled with circular metallic tubes, Composites Part B: Engineering, 145, 261-269.
  • 8. Lu G., Yu T.X., 2003, Energy Absorption of Structures and Materials, Elsevier, 1-424.
  • 9. Novak N., Vesenjak M., Ren Z., 2016, Auxetic cellular materials – a review, Strojniški Vestnik – Journal of Mechanical Engineering, 62, 9, 485-493.
  • 10. Palanivelu S., Paepegem W.V., Degrieck J., Vantomme J., Kakogiannis D., Ackeren J.V., Hemelrijck D.V., Wastiels J., 2010, Comparison of the crushing performance of hollow and foam-filled small-scale composite tubes with different geometrical shapes for use in sacrificial cladding structures, Composites Part B: Engineering, 41, 6, 434-445.
  • 11. Qin Q., Zhang W., Liu S., Li S., Zhang J., Poh L.H., 2018, On dynamic response of corrugated sandwich beams with metal foam-filled folded plate core subjected to low-velocity impact, Composites Part A: Applied Science and Manufacturing, 114, 107-116.
  • 12. Sevtsuk A., Kalvo R., 2014, A freeform surface fabrication method with 2D cutting, 2014 Proceedings of the Symposium on Simulation for Architecture and Urban Design, 109-116.
  • 13. Sun G., Li S., Liu Q., Li G., Li Q., 2016, Experimental study on crashworthiness of empty/aluminum foam/honeycomb-filled CFRP tubes, Composite Structures, 152, 969-993.
  • 14. Wang T., Wang L., Ma Z., Hulbert G.M., 2018b, Elastic analysis of auxetic cellular structure consisting of re-entrant hexagonal cells using a strain-based expansion homogenization method, Materials and Design, 160, 284-293.
  • 15. Wang Y., Lai H., Ren X.J., 2019, Enhanced auxetic and viscoelastic properties of filled reentrant honeycomb, Physica Status Solidi, 257, 1900184.
  • 16. Wang Z., 2019, Recent advances in novel metallic honeycomb structure, Composites Part B: Engineering, 66, 731-741.
  • 17. Wang Z., Liu J., 2018, Mechanical performance of honeycomb filled with circular CFRP tubes, Composites Part B: Engineering, 135, 232-241.
  • 18. Wang Z., Liu, J., 2019, Numerical and theoretical analysis of honeycomb structure filled with circular aluminum tubes subjected to axial compression, Composites Part B: Engineering, 165, 626-635.
  • 19. Wang Z., Liu J., Yao S., 2018a, On folding mechanics of multi-cell thin-walled square tubes, Composites Part B: Engineering, 132, 17-27.
  • 20. Yan L., Chouw N., Jayaraman K., 2014, Lateral crushing of empty and polyurethane-foam filled natural flax fabric reinforced epoxy composite tubes, Composites Part B: Engineering, 63, 15-26.
Uwagi
Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-43321d07-946d-432e-9d20-9acc46f7b896
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.