Heat treatment of EN AC-AlSi13Cu2Fe silumin and its effect on change of hardness of the alloy

• Autorzy: Pezda J.
• Języki publikacji: EN

Abstrakty

EN

Wide application of aluminum casting alloys is connected with their very good physical and technical properties. Within such group of alloys, silumins play important role in automotive and aviation industry, as well as in another branches of technique, because the silumins enable casting of complicated shapes. The most important parameters which predetermine mechanical properties of a material in aspects of suitability for castings of machinery components are: tensile strength (Rm), elongation and hardness. Alloys based on equilibrium system of Al-Si comprise additional constituents (e.g.: Mg, Cu) enabling, except modification, improvement of mechanical properties, obtained in result of heat treatment. In the paper are presented results of investigations concerning effect of the heat treatment on change of hardness (HB) of the EN AC-AlSi12Cu2Fe alloy. Investigated alloy was melted in an electric resistance furnace. Run of the crystallization was presented with use of the thermal-derivative method (ATD). This method was also implemented to determination of heat treatments temperature range of the alloy. Performed heat treatment gave effect in change of the hardness. Performed investigations have enabled determination of heat treatment parameters range, which conditions suitable hardness of the investigated alloy.

Słowa kluczowe

EN

heat treatment; thermal derivative method; alloy hardness

PL

obróbka cieplna; metoda ATD; twardość stopu

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2010
• Tom: Vol. 10, iss. 1 spec.
• Strony: 131--134
• Opis fizyczny: Bibliogr. 14 poz., rys., tab., wykr.

Twórcy

autor

Pezda J.

• Institute of Chipless Technology, ATH Bielsko-Biała, Willowa 2, 43-309 Bielsko-Biała

Bibliografia

• [1] P. Wasilewski, Silumins – Modification and its impact on structure and properties, PAN Solidification of metals and alloys, Zeszyt 21, Monografia, Katowice 1993 r.
• [2] S. Pietrowski, Silumins, Wydawnictwo Politechniki Łódzkiej, Łódź 2001 (in Polish).
• [3] J. Braszczyński, Theory of foundry processes, PWN, Warszawa 1989 (in Polish).
• [4] Z. Poniewierski, Crystallization and properties of silumins, WNT Warszawa 1989 (in Polish).
• [5] W. Orłowicz, M. Tupaj, M. Mróz, Selecting of heat treatment parameters for AlSi7Mg0,3 alloy, Archives of Foundry, vol. 6, No. 22 (2006) 350-356 (in Polish).
• [6] E. Fraś, Crystallization of metals and alloys, PWN, Warszawa 1992 (in Polish).
• [7] J. Piątkowski, Development of the fundamentals of melting and casting technology of Al-Me (Cr, Ni, Mo, W, Ti) master alloys used for modification of microstructure in silumins, Archives of Foundry Engineering vol. 9, Iss. 2/2009, 17-20.
• [8] J. Pezda, Effect of modifying process on mechanical properties of EN AC-43300 silumin cast into sand moulds, Archives of Foundry Engineering vol. 9, Iss. 3/2009, 121-124.
• [9] J. Pezda, Effect of dispersion hardening process on machinability of EN AB-AlSi9Mg silumin, Archives of Foundry Engineering vol. 9, Iss. 4/2009, 183-186.
• [10] R. Gorockiewicz Effect of heat treatment on microstructure of silumins, Archives of Foundry, vol. 3, No 9(2003) (in Polish).
• [11] L.A. Dobrzański, L. Reimann, G. Krawczyk, Influence of the ageing on mechanical properties of the aluminium alloy AlSi9Mg, Archives of Materials Science and Engineering vol 31, Iss. 1(2008) 37-40.
• [12] J.H. Sokolowski, M.B. Djurdjevic, C.A. Kierkus, D.O. Northwood, Improvement of 319 aluminium alloy casting durability by high temperature solution treatment, Proceedings of the 7th Scientific Conference „Achievements in Mechanical and Materials Engineering” AMME’1998, Gliwice-Zakopane, 1998, 475-478.
• [13] M.M. Haque, A. F. Ismail, Effect of superheating temperatures on microstructure and properties of strontium modified aluminium-silicon eutectic alloy, Proceedings of the 13th International Scientific Conference „Achievements in Mechanical and Materials Engineering” AMME’2005, Gliwice-Wisla, 2005, 267-270.
• [14] L.A. Dobrzański, M. Kasprzak, W. Kasprzak, J.H. Sokolowski, A novel approach to the design and optimisation of aluminium cast component heat treatment processes using advanced UMSA physical simulations, Journal of Achievements in Materials and Manufacturing Engineering 24/2 (2007) 139-142.