Svojstva izgiba kleënoj drevesiny iz topolâ posle cikličeskoj nagruzki

• Autorzy: Gáborík J. , Vilhanová A.
• Języki publikacji: RU

Abstrakty

RU

Lamellârnaâ drevesina predstavlâet soboj konstrukcionnyj material, kotoryj blagodarâ svoim mehaničeskim svojstvam podhodit dlâ izgotovleniâ nesuŝih èlementov konstrukcij sidenij i konstrukcij krovatej. Rabota napravlena dlâ issledovaniâ vliâniâ cikličeskoj nagruzki izgibom kleënoj drevesiny, osnovnym komponentom kotoroj âvlâetsâ špon izgotovlennyj iz topolâ. Vo vremâ cikličeskoj nagruzky, nablûdaemye svojstva pročnosti i uprugosti izmenâlisʹ neravnomerno.

Słowa kluczowe

PL

drewno; fornir; wytrzymałość drewna

• Wydawca: Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
• Czasopismo: Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology
• Rocznik: 2018
• Tom: No. 104
• Strony: 60--69
• Opis fizyczny: Bibliogr. 33 poz.

Twórcy

autor

Gáborík J.

• Department of Furniture and Wooden Product, Faculty of Wood Sciences and Technology, Technical University in Zvolen, Slovakia

autor

Vilhanová A.

• Department of Furniture and Wooden Product, Faculty of Wood Sciences and Technology, Technical University in Zvolen, Slovakia,

Bibliografia

• 1. AYDIN İ., ÇOLAK S., ÇOLAKOĞLU G., SALIH E., 2004: A comparative study on some physical and mechanical properties of Laminated Veneer Lumber (LVL)produced from Beech (Fagus orientalis Lipsky) and Eucalyptus (Eucalyptuscamaldulensis Dehn.) veneers. Holz als Roh- und Werkstoff. 62 (3), p. 218-220,DOI: 10.1007/s00107-004-0464-3.
• 2. BAO F., FU F., CHOONG E., T., HSE C., 2001: Contribution factor of wood properties of three poplar clones to strength of laminated veneer lumber Wood Fiber Sci, 33 (3), p. 345-352.
• 3. BEKHTA P., NIEMZ P., SEDLIAČIK J., 2012: Effect of pre-pressing of veneer on the glueability and properties of veneer-based products. In European journal of wood and wood products. 2012, Vol. 70, No. 1-3, p. 99-106.
• 4. BEKHTA P., PROSZYK S., KRYSTOFIAK T., SEDLIAČIK J., NOVÁK I., MAMOŇOVÁ M., 2017: Effect of short-term thermomechanical densification on the structure and properties of wood veneers. In Wood material science & engineering. 2017, No. 1, p. 40-54, ISSN 1748-0272.
• 5. DUDAS J., VILHANOVÁ A., 2013.
• 6. ECKELMAN C. A., 1993: Potential uses of laminated veneer lumber in urnitured. Forest Products Journal. 43 (4): p. 19-24.
• 7. EN 1725 2001: Domestic furniture. Beds and mattresses. Safety requirements and test methods. Brussels, Belgium: European Commttee for Standardization: 2001.
• 8. EN 310 1993: Wood-based panels – Determination of modulus of elasticity in bending and of bending strength. Brussels, Belgium: European Commttee for Standardization: 1993.
• 9. FEKIAČ J., 2016: Priestorovéprvky v konštrukciách čalúne ného nábytku – tvárne nédyhy. In Čalúnnickédni 2016: medzinárodný vedecko-odborný seminár. Zvolen: 2016, p. 44-49, ISBN 978-80-228-2906-9.
• 10. FEKIAČ J., GÁBORÍK J., 2016: Formability of radial and tangential beech veneers. In Annals of Warsaw University of Life Sciences. 2016, No. 94, p. 191-197, ISSN 1898-5912.
• 11. FEKIAČ J., GÁBORÍK J., ŠMIDRIAKOVÁ M., 2016: 3D formability of moistened and steamed veneers. In Acta Facultatis Xylologiae Zvolen, 2016, No. 2, p. 15-26. ISSN 1336-3824.
• 12. FEKIAČ J., ZEMIAR J., GAFF M., GÁBORÍK J., GAŠPARÍK M., MARUŠÁK R., 2015. 3D-moldability of veneers plasticized with water and ammonia. In BioResources. 2015. Vol. 10, No. 1, p. 866-876.
• 13. GÁBORÍK J., 2012: Selected properties of laminated wood made of densified layers; In Chip and chipless woodworking processes 2012: the 8th international science conference, September 6-8, 2012, Technical University in Zvolen. Zvolen: Technická Univerzitavo Zvolene. 2012, p. 87-92, ISBN 978-80-228-2385-2.
• 14. GÁBORÍK, J. 2013; Effect of adhesive on selected properties of laminated wood. In.: Pokrokyvovýrobe a použitílepidiel v drevopriemysle = Adhesives in woodworking industry: XXI. sympózium, Zvolen, June 26-28, 2013: zborník referátov Zvolen: Technická univerzita vo Zvolene, 2013, p. 52-58, ISBN 978-80-228-2529-0.
• 15. GÁBORÍK J., DUDAS J., KULÍK J., 2010: Selected properties of laminated wood of poplar. In: Annals of Warsaw University of Life Sciences – SGGW. No 71, p. 182- 186, ISSN 1898-5912.
• 16. GÁBORÍK J., DUDAS J., KULÍK J., RAUČINA M., 2011: Properties of densified laminated aspen wood at bend loading. In.: Annals of Warsaw University of Life Sciences. Forestry and Wood Technology. - Warszawa: Warszaw University of Life Sciences Press, 2011, No. 74, p. 69-73, ISSN 1898-5912.
• 17. GÁBORÍK J., GAFF M., RUMAN D., ZÁBORSKÝ V., KAŠÍČKOVÁ V., SIKORA A., 2016. Adhesive as a Factor Affecting the Properties of Laminated Wood. In.: BioResources.Vol.11, No.4, p. 10565-10574, ISSN 1930-2126,DOI: 10.15376/biores.11.4.10565-10574
• 18. GÁBORÍK J., VILHANOVÁ A., 2016: Selected mechanical properties of lightened plywood. In Annals of Warsaw University of Life Sciences. 2016, p. 205-211, ISSN 1898-5912.
• 19. GAFF M., GÁBORÍK J., 2014: Effect of cyclic loading on the elasticity of beech solid and laminated wood / BioResources - Vol. 9, No. 3, p. 4288-4296, ISSN 1930-2126.
• 20. IGAZ R., MACEK Š., ZEMIAR J., 2014: Vplyv jednosmerného cyklického zaťažovania ohy bom na počiatočnú rýchlosť relaxácie bukový chlamiel. In Acta Facultatis Xylologiae. Technical University in Zvolen, Faculty of Wood Science and Technology, 2014, 56 (2): p. 27-35, ISSN 1336-3824.
• 21. KURJATKO S., et al. 2010: Wood quality parameters determining its end use. Technical University in Zvolen, Slovakia (2010), 352 p. (in Slovak).
• 22. LANGOVÁ N., JOŠČÁK P., 2014: Effect of mechanical modification of wood veneers on their planar formability. In Annals of Warsaw University of Life Sciences. 2014, No. 87, p. 142-147, ISSN 1898-5912.
• 23. LANGOVÁ N., JOŠČÁK P., MOŽUCHOVÁ M., TRENČANOVÁ Ľ., 2013: Analysis the effects bending load of veneers for purposes of planar moulding. In Annals of Warsaw University of Life Sciences. 2013, No. 83, p. 173-178, ISSN 1898- 5912.
• 24. MAKOVÍNY I., ZEMIAR J., 2003: Elektrické teplo v drevárskej praxi. Technická univerzita vo Zvolene. ISBN 80-228-1268-4.
• 25. SLABEJOVÁ, G., ŠMIDRIAKOVÁ, M. 2014. Influence of modification of veneers on 3D - forming. In Annals of Warsaw University of Life Sciences. Forestry and Wood Technology. Warszawa: Warszaw University of Life Sciences Press, 2014, No. 85, p. 226-229, ISSN 1898-5912.
• 26. SLABEJOVÁ G., LANGOVÁ N., DEÁKOVÁ V., 2017: Influence of silicone resin modification on veneer tensile strength and deformation. Acta Facultatis Xylologiae Zvolen, 2017, 59 (1), p. 41-47, ISSN 1336-3824.
• 27. ŠMIDRIAKOVÁ M., SEDLIAČIK J., VÉGH B., BEKHTA P., 2015: Aplikácianapenenej PVAC disperzieprivýrobepreglejovanýchdosiek. In Acta Facultatis Xylologiae. Technical University in Zvolen, Faculty of Wood Science and Technology 2015. Roč. 57, No. 2, p. 109-115, ISSN 1336-3824.
• 28. SVOBODA T., RUMAN D., GAFF M., GAŠPARÍK M., MIFTIEVA E., DUNDEK Ľ., 2015: Bending characteristics of multilayered soft and hardwood materials. Bioresouces 10(4), p. 8461-8473, DOI: 10.15376/biores.10.4.8461-8473.
• 29. TOMASI R., PARISI M., A., PIAZZA M., 2009: Ductile Design of Glued-Laminated Timber Beams. In: Practice Periodical on Structural Design and Construction, Vol.14, Issue 3. On line: https://ascelibrary.org/doi/full/10.1061/%28ASCE%291084- 0680%282009%2914%3A3%28113%29.
• 30. VIŠŇOVSKÝ P., 2015: Pevnostné vlastnosti lamelového dreva cyklicky namáhané ohybom. Diplomathesis. 61 p.
• 31. ZEMIAR J., GÁBORÍK J., MUZIKÁŘ Z., NAVRÁTIL V., RUŽINSKÁ E., ŠEBO N., 2009: Technológiavýrobynábytku. 1. Vydanie. Zvolen: TU voZvolene. 2009, 287 p. ISBN 978-80-228-2064-6.
• 32. ZEMIAR J., FEKIAČ J., 2014: Skúšanie a hodnotenie 3D - tvárnostidýh. In Acta Facultatis Xylologiae Zvolen: Technical University in Zvolen, Faculty of Wood Science and Technology, 2014, No. 1, p. 31-38, ISSN 1336-3824.
• 33. ZEMIAR J., FEKIAČ J., GÁBORÍK J., 2014: Strengthening of veneers for 3D- forming. In Annals of Warsaw University of Life Sciences. 2014, p. 297-303, ISSN 1898-5912.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).