Głogów pollution test station, a review of 30-years research

• Autorzy: Chrzan Krystian Leonard

Identyfikatory

DOI

10.15199/48.2021.01.42

Warianty tytułu

PL

Stacja prób izolatorów w Hucie Miedzi Głogów, przegląd z 30-letnich badań

• Języki publikacji: EN

Abstrakty

EN

Insulators made of different materials were tested: porcelain, glass, hydrophobic glazes, silicone rubber, hydrophobic epoxy resin and polymer concrete. Special attention was paid for tests of insulators that have a different specific leakage distance. The leakage current and flashovers were monitored and the degree of pollution on the insulator surfaces was sampled on different insulators with the same profile but made of different materials. It was found that a shorter specific leakage distance than that recommended by the IEC 60815 standard is possible.

PL

Testowano izolatory wyprodukowane z różnych materiałów: z porcelany, szkła, szkliw półprzewodzących, kauczuku silikonowego, żywicy epoksydowej, i betonu polimerowego. Szczególną uwagę poświęcono próbom izolatorów mających różną drogę upływu. Rejestrowano prąd upływu i przeskoki oraz wyznaczano ESDD na izolatorach o tym samym profilu lecz wykonanych z różnych materiałów. Wykazano, że jednostkowa droga upływu może być krótsza niż ta zalecana przez normę IEC 60815.

Słowa kluczowe

EN

flashover; industrial pollution; leakage current; surface discharge

PL

przeskok; zabrudzenie przemysłowe; prąd upływu; wyładowania powierzchniowe

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2021
• Tom: R. 97, nr 1
• Strony: 200--205
• Opis fizyczny: Bibliogr. 35 poz., rys., tab.

Twórcy

autor

Chrzan Krystian Leonard

• Politechnika Wrocławska, Katedra Podstaw Elektrotechniki i Elektrotechnologii, ul. Wybrzeże Wyspiańskiego 27, 50-370 Wrocław

Bibliografia

• [1] Study Committee B2, Working Group B2.03, Guide for the establishement of naturally polluted insulator testing stations. CIGRE Brochure 333, (2007)
• [2] Chrzan K.L, Holtzhausen J.P., Vosloo W.L., Vermeulen J ., Field insulator test station in Poland (in Polish). Wiadomości Elektrotechniczne, 77 (2009), No 11, 42- 46
• [3] Chrzan K.L., Abdi S.E., Impact of environmental conditions in West Europe, Poland and Algeria. International Symposium on High Voltage Engineering, ISH, Ljubljana, (2007), paper T4-126
• [4] Chrzan K.L., Application of silicone coatings on porcelain insulators in Poland, a case study. International Symposium ELEKTROENERGETICA, Stara Lesna, Slovak Republic, (2007), 355-358
• [5] Chrzan K.L., Streubel H., Artificial rain test of outdoor long rods insulators. International Symposium on High Voltage Engineering ISH, Cape Town, (2009), paper E-31
• [6] Liana E., Gendolla T., Pobudejski M., Chemical monitoring of atmospheric precipitations in Lower Silesia (in Polish). Raport roczny z badań w 2009 roku, (2010) IMGW-PIB Oddział we Wrocławiu
• [7] Chrzan K.L, Climate in Poland from the view point of overhead power lines (in Polish). Przegląd Elektrotechniczny, (2010), No 11b, 115-120
• [8] Chrzan K.L., Performance of composite insulators without sheds under light pollution. 15th International Symposium on High Voltage Engineering ISH, Ljubljana, (2007), paper T4-124
• [9] Chrzan K.L., Haddad M., Behaviour of insulators and surge arresters at Glogow pollution test station. 39th Int. Universities Power Engineering Conference, UPEC, Bristol, UK, (2004), 193-196
• [10] Chrzan K.L., Fuse indicator of insulator flashover Polish Patent, no 205397, (2010)
• [11] Chrzan K.L., Stec C., Farzaneh M., Probes for spot measurement of surface conductivity on polluted insulators. IET Science, Measurement and Technology, 1, (2007), No. 5, 295- 300
• [12] Chrzan K.L., Grzybowski S., Koehler W., Pollution Performance of 110 kV Metal Oxide Arresters. IEEE Transactions on Power Delivery, 12, (1997), No. 2, 728-733
• [13] Chrzan K.L., Leakage currents on naturally contaminated porcelain and silicone insulators. IEEE Transactions on Power Delivery, 25, (2010), No 4, 904-910
• [14] Chrzan K.L., Vosloo W.L., Hol tzhausen J.P., Leakage current on porcelain and silicone insulators under sea or light industrial pollution. IEEE Trans. on Power Delivery, 26, (2011), No 3, July, 2051-2052
• [15] Chrzan K.L., Hinrichsen V., Temperature monitoring of metal oxide surge arresters. International Conference on Advances in Processing Testing and Application of Dielectric Materials APTADM, Wroclaw, Poland, (2001), 183-186
• [16] Chrzan K.L., Thermovision diagnostics of metal oxide surge arresters. International Symposium on High Voltage Engineering, ISH, Ljubljana, (2007), paper T10-125
• [17] Chrzan K.L., Koehler W., Diagnostics of high voltage metal oxide arresters. Procedure errors. International Symposium on High Voltage Engineering ISH, London (1999)
• [18] Chrzan K.L., Paplinski P., Widlicki Z., Application of LCM-1 recorder for gapless surge arresters diagnostics (in Polish). Energetyka, zeszyt tematyczny 1, (2003), 14-16
• [19] Wankowicz J., Pohl Z., Chrzan K., Surface conductivity and ESDD as parameters of the pollution severity of high voltage insulators. Archiwum Elektrotechniki, XLIII, (1994), Zeszyt 1, 59-70
• [20] Chrzan K., Pohl Z., Evaluation of pollution severity using indirect method Polish Patent, no 147790 (1990)
• [21] Chrzan K., Conductivity of aqueous dust solutions. IEEE Transactions on Electrical Insulation, 22, (1987), No. 3, 241- 244
• [22] Gubański S.M., Wańkowicz J.G., Distribution of Natural Pollution Surface Layers on Silicone Rubber Insulators and their UV Absorption. IEEE Transactions on Electrical Insulation, 24 (1987), No. 4, August, 689-697
• [23] Chrzan K.L., Pollution test station Glogow, twenty years of research. 13th International Symposium on High Voltage Engineering ISH, Delft, (2003), paper 088
• [24] Chrzan K.L., Performance of hydrophobic epoxy insulators under industrial pollution. 14th International Symposium on High Voltage Engineering, Ljubljana, (2007), paper T4-86
• [25] Chrzan K.L., Znaidi R., Outdoor insulators and housings breakdowns caused by pollution. 16th Int. Symposium on High Voltage Engineering, ISH, Hannover (2011)
• [26] Chrzan K.L., Outdoor high voltage insulator. Polish Patent, no 207081, (2005)
• [27] Chrzan K.L., Silicone rubber insulators with notched surface. International Symposium on High Voltage Engineering ISH, Cape Town, (2009), paper E-29
• [28] Chrzan K.L., Pollution accumulation on silicone rubber and on porcelain insulators (in Polish). Przegląd Elektrotechniczny, (2011), No 12a, 129-132
• [29] Chrzan K.L., Aleksy M., Field tests of prototype surge arresters (in Polish). Wiadomości Elektrotechniczne, 79, (2011), No 7, 30-32
• [30] Chrzan K. L., Influence of profile on the pollution performance of ceramic long rod insulators. Technichna Elektrodynamika (Ukrainian Journal) No 1, (2008), 113-116
• [31] Chrzan K.L., Moro F., Concentrated discharges and dry bands on polluted outdoor insulators. IEEE Transactions on Power Delivery 22 (2007), No.1, 466-471
• [32] Chrzan K.L., Winter H.-J., Lambrecht J., Problems and fears related to operation of composite insulators (in Polish) Energetyka, (2008), No. 6, 412-415
• [33] Chrzan K.L., Zipp M., Anomalous leakage currents on silicone hollow insulators. Przegląd Elektrotechniczny, (2020), No. 9, 91-93
• [34] Chrzan K.L., Energy loss on insulators of overhead power lines (in Polish). Rynek Energii, (2017), No. 1, 11-16
• [35] Chrzan K.L., Failure indicator of composite insulators. HighVolt Kolloquium, Dresden, (2019), paper 8.1

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).