Thermophysical properties of the phase change material mixtures - preliminary studies on macromolecular hydrocarbons example

• Autorzy: Klugmann-Radziemska E. , Wcisło P. , Denda H. , Ryms M.
• Języki publikacji: EN

Abstrakty

EN

The aim of this work is a theoretical and experimental analysis of the macromolecular hydrocarbons mixtures composition and the impact on thermophysical parameters of the phase change materials (PCM) made from these mixtures. The analysis of the current state of knowledge extended by the author's own studies have been presented. Thermophysical characteristics of the hydrocarbons and their mixtures have been specified, in such a way, that on this basis description of the nature of the effects from individual fractions can be obtained, and the most important parameters characterizing the PCMs, such as the temperature peak of the phase transition or the heat of transition, can be set down.

Słowa kluczowe

EN

thermophysical parameters; PCM; hydrocarbons

PL

parametry termofizyczne; PCM; węglowodory

• Wydawca: Polskie Towarzystwo Energetyki Słonecznej PTES - ISES
• Czasopismo: Polska Energetyka Słoneczna
• Rocznik: 2014
• Tom: nr 1-4
• Strony: 39--45
• Opis fizyczny: Bibliogr. 11 poz., rys., tab., wykr.

Twórcy

autor

Klugmann-Radziemska E.

• Gdansk University of Technology, Faculty of Chemistry, Gdansk, Poland

autor

Wcisło P.

• Gdansk University of Technology, Faculty of Chemistry, Gdansk, Poland

autor

Denda H.

• Gdansk University of Technology, Faculty of Chemistry, Gdansk, Poland

autor

Ryms M.

• Gdansk University of Technology, Faculty of Chemistry, Gdansk, Poland

Bibliografia

• Cabeza L. F., Castell A., Barreneche C., Gracia A., Femandez A. I., 2011, Materials used as PCM in thermal energy storage in buildings: a review, Renewable and Sustainable Energy Reviews, Vol. 15, pp. 1675-1695.
• Dirand M., Bouroukba M., Briard A. J., Chevallier V., Petitjean D., Corriou J. P., 2002, Temperatures and enthalpies of (solid + solid) and (solid + liquid) transitions of n-alkanes, Journal of Chemical Thermodynamics, Vol. 34, pp. 1255-1277.
• Dubovsky V., Ziskind G., Letan R, 2011, Analytical model of a PCM-air heat exchanger, Applied Thermal Engineering, 31 No. 16, 3453-3462.
• Felix A., Solanki S. C., Saini J. S., 2008, Heat transfer characteristics of thermal energy storage system using PCM capsules: A review, Renewable and Sustainable Energy Reviews, 12, Np. 9, pp. 2438- 2458.
• Höhne G., Hemminger W., Flammersheim H. J., 2003, Differential Scaming Calorimetry, Springer, Germany 2003.
• Kenisarin M., Mahkamov K., 2011, Solar energy storage using phase change materials, Renewable Sustainable Energy Revievs, 11, No. 9, pp. 1913-1965, 2007.
• Lewandowski W., Lewandowska-Iwaniak W., 2014, The external walls of a passive building: A classification and description of their thermal and optical, Energy and Buildings, Vol. 69, pp. 93- 102.
• Pungor E., 1995, A Practical Guide to Instrumental Analysis, Boca Raton, Florida.
• Regin A. F., Solanki S. C., Saini J .S., 2008, Heat transfer characteristics of thermal energy storage system using PCM capsules: A review, Renewable and Sustainable Energy Reviews, 12, No. 9, pp. 2438-2458.
• Roduit B., Xia L., Folly P., Berger B., Mathieu J., Sarbach A., Andres H., Ramin M., Vogelsanger B., Spitzer D., Moulard H., Dilhan D., 2008, The simulation of the thermal behavior of energetic materials based on DSC and HFC signals, Journal of Thermal Analysis and Calorimetry, Vol. 93, pp. 143-152.
• Xiao W., Wang X., Zhang Y., 2009, Analytical optimization of interior PCM for energy storage in a lightweight passive solar room, Applied Energy, 86, No. 10, pp. 2013-2018.