Biomass as a Source of Energy in Iron Ore Agglomerate Production Process

• Autorzy: Fröhlichová M. , Legemza J. , Findorák R. , Mašlejová A.

Identyfikatory

DOI

10.2478/amm-2014-0139

Warianty tytułu

PL

Biomasa jako źródło energii w procesie produkcji aglomeratów rudy żelaza

• Języki publikacji: EN

Abstrakty

EN

This article contains characteristics of selected types of biomass, which can be considered as an alternative fuel in the production of iron ore agglomerate. Selected types of biomass were evaluated by chemical analysis, X-ray phase analysis and microscopic analysis using the camera on microscope Olympus BX 51. Biomass was characterized according to its structure, chemical composition and chemical composition of ash. The obtained data were confronted with the data for coke breeze and based on the results, conclusions were made about the possible use of selected types of biomass as an alternative fuel in the process of iron ore agglomerate production.

PL

Artykuł zawiera charakterystykę wybranych rodzajów biomasy, które mogą być uznane jako paliwo alternatywne w produkcji aglomeratów rudy żelaza. Wyselekcjonowane rodzaje biomasy poddano ocenie za pomocą analizy chemicznej, rentgenowskiej analizy fazowej oraz analizy mikroskopowej z użyciem kamery mikroskopu Olympus BX 51. Scharakteryzowano również strukturę, skład chemiczny i skład chemiczny popiołu biomasy. Uzyskane dane porównano z danymi dotyczącymi koksiku i na podstawie otrzymanych wyników opracowano wnioski odnośnie do możliwości korzystania z wybranych rodzajów biomasy jako paliwa alternatywnego w procesie produkcji aglomeratu rudy żelaza.

Słowa kluczowe

EN

agglomerate; biomass; coke breeze; ash; alkalia; phase composition; microstructure

PL

aglomerat; biomasa; koksik; popiół; alkalia; skład fazowy; mikrostruktura

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2014
• Tom: Vol. 59, iss. 2
• Strony: 815--820
• Opis fizyczny: Bibliogr. 17 poz., rys., tab.

Twórcy

autor

Fröhlichová M.

• Department of Ferrous and Foundry Metallurgy, Technical University of Košice, Park Komenského 14, 042 00 Košice, Slovak Republic

autor

Legemza J.

• Department of Ferrous and Foundry Metallurgy, Technical University of Košice, Park Komenského 14, 042 00 Košice, Slovak Republic

autor

Findorák R.

• Department of Ferrous and Foundry Metallurgy, Technical University of Košice, Park Komenského 14, 042 00 Košice, Slovak Republic

autor

Mašlejová A.

• U. S. Steel Košice, S.R.O., Slovak Republic

Bibliografia

• [1] M. Zandi-Martinez-Pacheco, M. Fray, Biomass for iron ore sintering, Minerals Engineering 23, 1139-1145 (2010
• [2] J. Lipart, T. Matuła, M. Niesler, L. Blacha, J. Filipczyk, Wastes from the coal-enrichment process as alternative reducers for lead smelting from lead-acid accmulator scrap, Metalurgija 52 (4), 493-496 (2013).
• [3] T. Umadevi, A. V. Deodhar, S. Kumar, C. S. Gururaj Prasad, M. Ranjan, Influence of coke breze particle size on quality of sinter, Ironmaking and Steelmaking 35 (8), 567-574 (2008).
• [4] M. Niesler, J. Stecko, L. Blacha, B. Oleksiek, Application offine-grained coke breeze fractions in the process of iron sintering, Metalurgija 53 (1), 37-40 (2014).
• [5] T. Ch. Ooi, E. Aries, B. C. R. Ewan, D. Thompson, D. R. Anderson, R. Fisher, T. Fray, D. Tognarelli, The study of sunflower seed husks asafuel in the iron ore sintering process, Minerals Engineering 1, 167-177 (2008).
• [6] M. Gan, X. Fan, X. Chen, Z. Ji, W. Lv, Y. Wang, Zhiyuan Yu, Tao Jiang, Reduction of Pollutant Emission in Iron Ore Sintering Process by Applying Biomass Fuels, ISIJ International 52 (9), 1565-1573 (2012).
• [7] R. Lovel, K. Vining, M. Dell ’Amico, Iron ore sintering with charcoal, Mineral Processing and Extractive Metallurgy 116 (2), 85-92 (2007).
• [8] R. Lovel, K. Vining, M. Dell ’amico, The Influence of Fuel Reactivity on Iron Ore Sintering, ISIJ International 49 (2), 195-202 (2009).
• [9] X. Fan, Strengthening refractory iron ore sintering with biomass fuel, 3rd International Symposium on High Temperature Metallurgical Processing, Hoboken, TMS 357-364 (2012).
• [10] W. Yang, S. Choi, E. S. Choi, D. W. Ri, S. Kim, Combustion Characteristics ina Iron Ore Sintering Bed- Evaluation of Fuel Substitution, Combustion and Flame 145, 447-463 (2006).
• [11] W. Yang, Modelling of Combustion and Heat Transfer in an Iron Ore Sintering Bed with Considerations Of Multiple Solid Phases, ISIJ International 44 (3), 492-499 (2004).
• [12] P. R. Dawson, Recent developments in iron ore sintering, part 1-4, Ironmaking and Steelmaking 20 (1), 135-151 (1993).
• [13] T. Norgate, D. Langberg, Environmental and economic aspects of charcoal use in Steelmaking, ISIJ International 49 (4), 587-595 (2009).
• [14] T. Norgate, N. Haque, M. Somerville, S. Jahanshahi, Biomass asa Source of Renewable Carbon for Iron and Steelmaking, ISIJ International 52 (8), 1472-1481 (2012).
• [15] J. Jandačka, M. Malcho, Biomass as a source of energy, Juraj Štefuň - GEORG, Žilina 1-77, (2007).
• [16] R. Moore, D. Clark, D. Vodopich, Botany Visual Resource Library, The Mc Graw-Hill Companies, Inc. All rights reerwed, LCMe Book-Chapter 04 (1998).
• [17] J. Kret, Harmful pollutants at pig iron production, Vysoká škola báňská - Technická univerzita, Ostrava 1-84 (2003)