Badanie płaskości oraz chropowatości powierzchni modeli cienkościennych wykonanych technologią przyrostową Fused Deposition Modeling

• Autorzy: Zmarzły Paweł , Klamka Magdalena , Szwej Wiktoria , Wróblewska Eliza

Identyfikatory

DOI

10.25961/ent.manag.26.01.05

Warianty tytułu

EN

Examination of the flatness and surface topography of thin wall models manufactured using Fused Deposition Modeling technology

• Języki publikacji: PL

Abstrakty

EN

3D printing technologies are gaining popularity year by year. They allow for a significant improvement in the production of prototypes and utility models. In addition, 3D printing facilitates the production of thin-walled elements and complex shapes, which is difficult when using traditional manufacturing methods. It should be noted that the technological parameters of 3D printing, such as the printing orientation and the thickness of a single layer, are very important because they affect the printing time, material expenditure and the dimensional accuracy of the printed details. There are many types of 3D printers, the operating principle of which and the building material used are different. However, one of the most popular and available types of additive manufacturing is Fused Deposition Technology. Therefore, detailed studies of this technology are particularly desirable by economic entities. The article presents research aimed at assessing the influence of the print direction and the thickness of a single layer of a building material on the flatness deviation and the 3D surface roughness parameters. Special thin-walled models were designed and printed from PLA material using a printer named MakerBot Replicator+. The research results presented in the article showed that the direction of printing and the thickness of a single layer of building material in the Fused Deposition Modeling Technology affect the roughness parameters, flatness and printing time of the produced models.

Słowa kluczowe

PL

drukarka 3D; technologie addytywne; FDM; osadzanie topionego materiału; płaskość; chropowatość powierzchni

EN

3D printer; additive technologies; FDM; Fused Deposition Modeling; flatness; surface roughness

• Wydawca: Polskie Towarzystwo Zarządzania Produkcją
• Czasopismo: Zarządzanie Przedsiębiorstwem
• Rocznik: 2023
• Tom: Vol. 26, nr 2
• Strony: 27--32
• Opis fizyczny: Bibliogr. 19 poz., il. kolor., fot.

Twórcy

autor

Zmarzły Paweł

• Kielce University of Technology, aleja Tysiaclecia Panstwa Polskiego 7, 25-314 Kielce, Poland

autor

Klamka Magdalena

• Kielce University of Technology, aleja Tysiaclecia Panstwa Polskiego 7, 25-314 Kielce, Poland

autor

Szwej Wiktoria

• Kielce University of Technology, aleja Tysiaclecia Panstwa Polskiego 7, 25-314 Kielce, Poland

autor

Wróblewska Eliza

• Kielce University of Technology, aleja Tysiaclecia Panstwa Polskiego 7, 25-314 Kielce, Poland

Bibliografia

• [1] Adamczak S., Zmarzły P., Kozior T., Gogolewski D., Analysis of the Dimensional Accuracy of Casting Models Manufactured By Fused Deposition Modeling Technology, 23rd International Conference Engineering Mechanics 2017, 66-69, 2017.
• [2] Budzik G., Tomaszewski K., Soboń A., Opportunities for the application of 3D printing in the critical infrastructure system, Energies., 15, 2022, https://doi.org/ 10.3390/en15051656.
• [3] Bustillo A., Pimenov D.Y., Mia M., Kapłonek W., Machine-learning for automatic prediction of flatness deviation considering the wear of the face mill teeth, J. Intell. Manuf., 32, 895-912, 2021, https://doi.org/ 10.1007/s10845-020-01645-3.
• [4] Cichoń K., Brykalski A., Zastosowanie drukarek 3D w przemyśle, Prz. Elektrotechniczny, 93, 2017, https://doi.org/10.15199/48.2017.03.36.
• [5] Dodziuk H., Druk 3D/AM. Zastosowania oraz skutki społeczne i gospodarcze, PWN, Warszawa, 2019.
• [6] Dzierwa A., Pawlus P., Zelasko W., The influence of disc surface topography after vapor blasting on wear of sliding pairs under dry sliding conditions, Coatings, 10, 2, 2020, https://doi.org/10.3390/coatings10020102.
• [7] Klamka M., Ocena wpływu wybranych parametrów technologii FDM na topografie powierzchni drukowanych wybranymi technologiami przyrostowymi, Praca dyplomowa magisterska, Wydział Zarządzania i Modelowania Komputerowego, Politechnika Świętokrzyska, 2022.
• [8] Kozior T., Bochnia J., Gogolewski D., Zmarzły P., Rudnik M., Szot W., Szczygieł P., Musiałek M., Analysis of metrological quality and mechanical properties of models manufactured with photo-curing PolyJet Matrix technology for medical applications, Polymers, 14, 3, 2022, https://doi.org/10.3390/polym14030408.
• [9] Kozior T., Bochnia J., Zmarzły P., Gogolewski D., Mathia T.G., Waviness of freeform surface characterizations from austenitic stainless steel (316L) manufactured by 3D printing-selective laser melting (SLM) technology, Materials, 13, 19, 2020, https://doi.org/ 10.3390/ma13194372.
• [10] MacDonald E., Salas R., Espalin D., Perez M., Aguilera E., Muse D., Wicker R.B., 3D printing for the rapid prototyping of structural electronics, IEEE Access, 2, 2014, https://doi.org/10.1109/ACCESS.2014.2311810.
• [11] Maloy R., Trust T., Kommers S., Malinowski A., La- Roche I., 3D Modeling and Printing in History/Social Studies Classrooms: Initial Lessons and Insights, Contemp. Issues Technol. Teach. Educ., 17, 2017.
• [12] Mikó B., Assessment of flatness error by regression analysis, Measurement, 171, 2021, https://doi.org/10. 1016/j.measurement.2020.108720.
• [13] Paszkiewicz A., Bolanowski M., Budzik G., Przeszłowski Ł., Oleksy M., Process of creating an integrated design and manufacturing environment as part of the structure of industry 4.0, Processes, 2020, https://doi.org/10.3390/PR8091019.
• [14] Pawlus P., Reizer R., Wieczorowski M., Comparison of results of surface texture measurement obtained with stylus methods and optical methods, Metrology and Measurement Systems, 25, 3, 589-602, 2018, https://doi.org/10.24425/123894.
• [15] Peed E., Lee N., 3D Printing, History of, [in:] Encycl. Comput. Graph. Games, 2019, https://doi.org/ 10.1007/978-3-319-08234-9 279-2.
• [16] Rayna T., Striukova L., From rapid prototyping to home fabrication: How 3D printing is changing business model innovation, Technological Forecasting and Social Change, 102, 214-224, 2016, https://doi.org/ 10.1016/j.techfore.2015.07.023.
• [17] Szczesiak R., Kowalik M., Cader M., Pyrzanowski P., Parametric numerical model for predicting mechanical properties of structures made with FDM technology from polymeric materials, Polimery, 63, 9, 626-632, 2021, https://doi.org/10.14314/polimery.2018.9.7.
• [18] Szwej W., Ocena jakości warstwy wierzchniej elementów wykonanych wybranymi technologiami przyrostowymi, Praca dyplomowa magisterska, Wydział Zarządzania i Modelowania Komputerowego, Politechnika Świętokrzyska, 2022.
• [19] Wróblewska E., Ocena odchyłki płaskości elementów wykonanych technologią przyrostową Fused Deposition Modeling, Praca dyplomowa magisterska, Wydział Zarządzania i Modelowania Komputerowego, Politechnika Świętokrzyska, 2022.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2024).