A study of the properties and development in technology for obtaining multi-component systems of particle reinforced aluminum and titanium alloys

• Autorzy: Gumen Olena , Selina Irina , Kruzhkova Mariia

Identyfikatory

DOI

10.17512/bozpe.2022.11.02

• Języki publikacji: EN

Abstrakty

EN

The article analyzes the groundwork on the influence of alloying contaminants on the structure and mechanical properties of aluminum alloys. Aluminum has become widely used in various parts of machine-building due to its physical properties. However, the main task of modern material science is to increase the strength of aluminum alloys. Therefore, today there is the development of materials and alloys based on aluminum with alloying constituents (copper, silicon, magnesium, zinc, mangan), which are administered in aluminum mainly to increase its strength. Especially attractive are properties of aluminum-doped by transition metals, in particular scandium, zirconium, iron, etc. Finally, conclusions are drawn in order to develop a material based on aluminum with increased hardness, durability, and crack resistance.

Słowa kluczowe

EN

aluminum alloys; multicomponent system; iron; particle reinforced chase

PL

stopy aluminium; system wieloskładnikowy; żelazo

• Wydawca: Wydawnictwo Politechniki Częstochowskiej
• Czasopismo: Budownictwo o Zoptymalizowanym Potencjale Energetycznym
• Rocznik: 2022
• Tom: Vol. 11
• Strony: 17--21
• Opis fizyczny: Bibliogr. 10 poz., rys.

Twórcy

autor

Gumen Olena

• National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”, Ukraine

• https://orcid.org/0000-0003-3992-895X

autor

Selina Irina

• National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”, Ukraine

• https://orcid.org/0000-0002-4010-3819

autor

Kruzhkova Mariia

• National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”, Ukraine

• https://orcid.org/0000-0002-3837-7140

Bibliografia

• 1.Gumen, O., Selina, I. & Selin, R. (2019) Projection of phase composition of lowcost titanium alloy welded joints by finite element mathematical modelling method. Energy-Efficiency in Civil Engineering and Architecture, 12, 51-56
• 2.Gumen, O., Ujma, A., Kruzhkova, M. (2021) Research into the process of spraying complex titanium and zirconium nitride on structural steel and reaction times relating to the final finish and quality obtained. Construction of Optimized Energy Potential, 1, 71-76.
• 3.Ibrahim, S.A., Seleman, M.M., Ahmed, H.M. & Hannora, A.E. (2019) Phase stability of mechanically alloyed Ti-Fe-Al alloys. Conference Series: Materials Science and Engineering.
• 4.Kaufman, J.G. & Rooy, E.L. (2004) Aluminium Alloy Castings. Properties, Processes and Applications. ASM International.
• 5.Kocks, U.F., Tome, C.N. & Wenk H.-R. (2000) Texture and anisotropy: preferred orientations in polycrystals and their effect on materials properties. Cambridge University Press, 282.
• 6.Korotkikh, A.G., Sorokin, I.V., Selikhova, E.A. & Arkhipov, V.A. (2020) Effect of B, Fe, Ti, Cu nanopowders on the laser ignition of Al-based high-energy materials. Combustion and Flame, 222, 103-110.
• 7.Lee, D., Omori, T., Han, K., Hayakawa, Y. & Kainuma, R. (2020) Texture formation in a polycrystalline Fe-Ni-Co-Al-Ti-B shape memory alloy. ISIJ International, 60, 12, 2973-2982.
• 8.Lepakova, O.K., Karakchieva, N.I., Golobokova, N.N., Galchenkoc N.K. & Afanasieva, N.I. (2020) High-temperature synthesis of Ti-Si-B and Ti-Al-B composites and coatings. International Journal of Self-Propagating High-Temperature Synthesis, 29, 3, 150-156.
• 9.Sverdlin, A. (2003) Properties of Pure Aluminum. Handbook of Aluminium: Vol. 1. Physical Metallurgy and Processes, ed. G.E. Davis, D.S. MacKenzie.
• 10.Weiland, E., Heger, D. & Hildebrand, H. (1999) Phases in the Fe-B-Al-Ti system. Praktische Metallographie, 36(5), 264-272.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).