Assessment of fatigue life of aluminized, coarse-grained MAR247 alloy supported by full-field ESPI measurements

• Autorzy: Kopec Mateusz , Kukla Dominik , Kowalewski Zbigniew L.

Identyfikatory

DOI

10.15632/jtam-pl/153041

• Języki publikacji: EN

Abstrakty

EN

In this paper, fatigue performance of an aluminide layer coated, coarse-grained MAR247 nickel superalloy was monitored by using the full-field Electronic Speckle Pattern Interferometry (ESPI) method in the range of stress amplitude from 350MPa to 650MPa. It was found, that the ESPI method enables precise monitoring of the fatigue behaviour of coated MAR247 specimens since the area of potential failure was accurately indicated within the initial stage of fatigue damage development.

Słowa kluczowe

EN

fatigue development; damage; nickel alloys; electronic speckle pattern interferometry

• Wydawca: Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
• Czasopismo: Journal of Theoretical and Applied Mechanics
• Rocznik: 2022
• Tom: Vol. 60 nr 4
• Strony: 619--623
• Opis fizyczny: Bibliogr. 10 poz., rys., tab.

Twórcy

autor

Kopec Mateusz

• Institute of Fundamental Technological Research Polish Academy of Sciences, Warsaw, Poland
• Department of Mechanical Engineering, Imperial College London, London, UK

• https://orcid.org/0000-0001-9565-3407

autor

Kukla Dominik

• Institute of Fundamental Technological Research Polish Academy of Sciences, Warsaw, Poland

autor

Kowalewski Zbigniew L.

• Institute of Fundamental Technological Research Polish Academy of Sciences, Warsaw, Poland

Bibliografia

• 1. Chen L., Peng P., He F., 2018, Fatigue life analysis of dropper used in pantograph-catenary system of high-speed railway, Advances in Mechanical Engineering, 10, 1-10.
• 2. Farahani B.V., Direito F., Sousa P.J., Tavares P.J., Infante V., Moreira P.M.P.G., 2022, Crack tip monitoring by multiscale optical experimental techniques, International Journal of Fatigue, 155, 106610.
• 3. Gao Y., Yang W., Huang Z., Lu Z., 2021, Effects of residual stress and surface roughness on the fatigue life of nickel aluminium bronze alloy under laser shock peening, Engineering Fracture Mechanics, 244, 107524.
• 4. Kopeć M., Brodecki A., Kukla D., Kowalewski Z.L., 2021, Suitability of DIC and ESPI optical methods for monitoring fatigue damage development in X10CrMoVNb9-1 power engineering steel, Archives of Civil and Mechanical Engineering, 21, 167, 1-13
• 5. Ma X.F., Zhai H.L., Zuo L., Zhang W.J., Rui S.S., Han Q.N., Jiang J.S., Li C.P., Chen G.F., Qian G.A., Zhao S.J., 2020, Fatigue short crack propagation behavior of selective laser melted Inconel 718 alloy by in-situ SEM study: Influence of orientation and temperature, International Journal of Fatigue, 139, 105739.
• 6. Pereira F.G.L., Lourenço J.M., do Nascimento R.M., Castro, N.A., 2018, Fracture behavior and fatigue performance of Inconel 625, Materials Research, 21, 4, e20171089.
• 7. Ritter K., Thiele K., 2019, Monitoring micro-damage evolution in structural steel S355 using speckle interferometry, [In:] Proceedings of the 7th International Conference on Fracture Fatigue and Wear, FFW 2018. Lecture Notes in Mechanical Engineering, Abdel Wahab M. (Edit.), Springer, Singapore.
• 8. Sasaki T., Ono H., Yoshida S., Sakamoto S., 2018, Fatigue analysis of 7075 aluminum alloy by optoacoustic method, [In:] Advancement of Optical Methods in Experimental Mechanics, Vol. 3. Conference Proceedings of the Society for Experimental Mechanics Series, L. Lamberti, M.T. Lin, C. Furlong, C. Sciammarella (Edit.), Springer, Cham.
• 9. Sitek R., Molak R., Zdunek J., Bazarnik P., Wiśniewski P., Kubiak K., Mizera J., 2021, Influence of an aluminizing process on the microstructure and tensile strength of the nickel superalloy IN 718 produced by the Selective Laser Melting, Vacuum, 186, 110041.
• 10. Zhang F., Xiao Z., Geng L., Wu J., Li H., Xi J., Wang J., 2014, Correlation fringe pattern of ESPI generated method based on the orientation partial differential equation, Optics Communications, 310, 85-89.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).