Effect of material on hydro-elastic behavior of marine propeller by using BEM-FEM hybrid software

• Autorzy: Ghassemi H. , Ghassabzadeh M. , Saryazdi M. Gh.
• Języki publikacji: EN

Abstrakty

EN

This paper studies the effect of material on the hydro-elastic behaviour. The geometry of flexible propeller changes due to hydrodynamic and inertial forces acting on the propeller. By using prepared software (called HYDRO-BEM and ELASTIC-FEM) the hydro-elastic features of the propeller made of various materials are analyzed. In the software the hybrid boundary element and finite element methods are used. First, the load acting on the propeller is determined by using the BEM and deformed propeller geometry is then obtained by the FEM. In the next step, the load on the deformed propeller is determined by the BEM and a new shape is obtained. The iterative procedure is repeated till the blade deflection and hydrodynamic characteristics (thrust, torque and efficiency) of the propeller become converged. Four different materials are examined. It is concluded that the hydro-elastic behaviour of the composite propeller is strongly affected by its flexibility due to light material.

Słowa kluczowe

EN

hydro-elasticity; propeller characteristics; deformed blade; HYDRO-BEM software; ELASTIC-FEM software

• Wydawca: Gdańsk University of Technology, Faculty of Ocean Engineering & Ship Technology
• Czasopismo: Polish Maritime Research
• Rocznik: 2013
• Tom: nr 4
• Strony: 62--70
• Opis fizyczny: Bibliogr. 12 poz., rys., tab.

Twórcy

autor

Ghassemi H.

• Hassan Ghassemi, Prof., Department of Ocean Engineering, Amirkabir University of Technology, Tehran, IRAN; http://hmaa.itgo.com/ghassemi.html tel.: [phone], fax: [phone]

autor

Ghassabzadeh M.

• Marine Industry Research Centre, Amirkabir University of Technology, Tehran, IRAN

autor

Saryazdi M. Gh.

• Vehicle Technology Research Institute, Amirkabir University of Technology, Tehran, IRAN

Bibliografia

• 1. Sontvedt, T.: Propeller blade stress application of finite element methods. Computers & Structures, Vol. 4, pp. 193-204, 1974.
• 2. Young, Y.L.: Hydro-elastic behaviour of the flexible composite propeller in wake inflow. 16th conf. on composite materials, Kyoto, Japan, 2007.
• 3. Young, Y.L.: Fluid-structure interaction analysis of flexible composite marine propellers. Journal of Fluids and Structures, Vol. 24, 799–818, 2008.
• 4. Blasques, J. P., Berggreen C., Poul Andersen, P.: Hydro-elastic analysis and optimization of a composite marine propeller. Marine structure, Vol. 23, 2010.
• 5. Lin H. J., Lai W. M., Kuo, Y. M.: Effect of stacking sequence on nonlinear hydro-elastic behaviour of composite propeller. Journal of Mechanics, Vol. 26, No. 3, September 2010.
• 6. Mulcahy, N. L. and Prusty B. G. and Gardiner C. P.: Hydroelastic tailoring of flexible composite propellers. Ships and Offshore Structures, Vol. 5, No. 4, 359–370, 2010.
• 7. Chau, T. B.: 2-D versus 3-D stress analysis of a marine propeller blade. Zeszyty Naukowe Akademii Morskiej w Gdyni, No. 64, July 2010.
• 8. Koronowicz, T., Krzemianowski, Z., Tuszkowska, T., Szantyr, J.A.: A complete design of ship propellers using the New computer system. Polish Maritime Research, Vol. 16, No. 1 (59); pp.29-34, 2009.
• 9. Ghassemi, H., Ghadimi, P.,: Computational hydrodynamic analysis of the propeller-rudder and the AZIPOD systems. Ocean Engineering, Vol. 34, pp.117-130, 2007.
• 10. Ghassemi, H.: The Effect of Wake Flow and Skew Angle on the Ship Propeller Performance. Scientia Iranica, Vol. 16, No. 2, pp.149-158, 2009.
• 11. Ghassemi, H.: Hydrodynamic performance of coaxial contrarotating propeller (CCRP) for large ships. Polish Maritime Research, Vol. 16, No. 1 (59), pp.22-28, 2009.
• 12. Ghassemi, H.: Hydrodynamic characteristics of the surfacepiercing propellers for the planing craft. J. Marine Sci. Appl., Vol. 7, pp.147-156, 2008.