PL
|
EN
Szukaj
Przeglądaj
Pomoc
O bazie
test
Preferencje
Polski
English
Język
Widoczny
[Schowaj]
Abstrakt
10
20
50
100
Liczba wyników
Tom - szczegóły
Adres strony
Kopiuj
Tytuł artykułu
Vol. 62, iss. 1
Czasopismo
Archives of Metallurgy and Materials
Wydawca
Institute of Metallurgy and Materials Science of Polish Academy of Sciences
Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
Rocznik
2017
Identyfikatory
Zawartość wolumenu
Vol. 62, iss. 1
artykuł:
In Situ TEM Study of Precipitation in a Quasicrystal-Strengthened Al-Alloy
(
Boncina T.
,
Zupanič F.
), s. 5--9
artykuł:
Nickel and Copper-Free Sintered Structural Steels Containing Mn, Cr, Si, and Mo Developed for High Performance Applications
(
Cias A.
,
Stoytchev M.
), s. 11--17
artykuł:
Evaluation of Pore Sizes in Welded Joints Made in Various Constructional Materials on the Basis of Penetrant Testing by Colour Method
(
Czuchryj J.
,
Irek P.
), s. 19--25
artykuł:
Carbon Nanomaterials Application as a Counter Electrode for Dye-Sensitized Solar Cells
(
Dobrzański A.
,
Prokopiuk vel Prokopowicz M.
,
Drygała A.
,
Wierzbicka A.
,
Lukaszkowicz K.
,
Szindler M.
), s. 27--32
artykuł:
Geometric Parameters of Cutting Tools that Can be Used for Forming Sided Surfaces with Variable Profile
(
Razumov M.
,
Grechukhin A.
,
Maslennikov A.
), s. 33--40
artykuł:
Material factors in relation to development time in liquid-penetrant inspection. Part 3. Testing of model plates
(
Irek P.
,
Słania J.
), s. 41--49
artykuł:
Tribological Properties and Microstructure of the Metal-Polymer Composite thin Layer Deposited on a Copper Plate by Electrocontact Sintering
(
Kovtun V.
,
Pasovets V.
,
Pieczonka T.
), s. 51--58
artykuł:
Theoretical-Experimental Analysis of the Workability of the Ni50Cr45N0.6 alloy
(
Łukaszek-Sołek A.
,
Świątoniowski A.
,
Celadyn K.
,
Sińczak J.
), s. 59--65
artykuł:
Practical Application of the Concept of Separating the Zone of Overheating and Reducing the Stress Level in Cathode Block of an Aluminium Electrolytic Cell During Formation of Connection with the Steel Pin by Cast Iron Pouring
(
Piekło J.
,
Maj M.
), s. 67--71
artykuł:
Optimisation of Mechanical Properties of 18%Ni350 Grade Maraging Steel Using Novel Heat Treatment
(
Marcisz J.
,
Adamczyk M.
,
Garbarz B.
), s. 73--84
artykuł:
FEM Analysis of Loads and Torque in a Skew Rolling Process for Producing Axisymmetric Parts
(
Pater Z.
), s. 85--90
artykuł:
Shielding gas effect on the structure of variable polarity GMA weldbrazed joints of galvanised sheets
(
Pfeifer T.
,
Winiowski A.
,
Pikuła J.
), s. 91--98
artykuł:
Causes of the cracks in the pipeline made of the 15HM steel
(
Słania J.
,
Krawczyk R.
,
Gątarek M.
), s. 99--104
artykuł:
Influence exerted by the shape of the surfaces of working roll barrels upon the course of the MEFASS (Metal Forming Aided by Shear Stresses) rolling process
(
Świątoniowski A.
,
Woźniak D.
,
Szostak J.
), s. 105--114
artykuł:
Low Alloy Steel Structures After Welding with Micro-Jet Cooling
(
Węgrzyn T.
,
Piwnik J.
,
Hadryś D.
,
Wszołek Ł.
), s. 115--118
artykuł:
Comparative Studies on the Wear of ADI Alloy Cast Irons as Well as Selected Steels and Surface-Hardened Alloy Cast Steels in the Presence of Abrasive
(
Wieczorek A. N.
), s. 119--128
artykuł:
Influence of heat treatment on the wear resistance of the ZnAl40Cu1.5Ti1.5 alloy
(
Michalik R.
,
Iwaniak A.
,
Wieczorek J.
), s. 129--136
artykuł:
Mechanical properties of Ni-Fe-Cu-P-B alloy produced by two component melt spinning (TCMS)
(
Wojciechowska M.
,
Ziewiec K.
,
Kąc S.
,
Prusik K.
), s. 137--140
artykuł:
Inverse Model for the Solute Micro-Field Formation during Self-Propagating High Temperature Reaction
(
Wołczyński W.
), s. 141--147
artykuł:
Numerical investigation of heat exchange in rotary furnace
(
Kolczyk E.
,
Miczkowski Z.
,
Czernecki J.
), s. 149--153
artykuł:
The role of β(Al12Mg17) phase on corrosion behavior of the AZ91 alloy in NaCl aqueous solution
(
Hatakeyama M.
,
Shimono K.
,
Iwashima D.
,
Saikawa S.
,
Sunada S.
), s. 155--158
artykuł:
Hot deformation behavior of Mg-Zn-Al alloy tube processed by severe plastic deformation
(
Fata A.
,
Faraji G.
,
Mashhadi M. M.
,
Tavakkoli V.
), s. 159--166
artykuł:
Experimental determination of the void volume fraction for S235JR steel at failure in the range of high stress triaxialities
(
Kossakowski P. G.
), s. 167--172
artykuł:
Analysis of forming thin titanium panels with stiffeners
(
Adamus J.
,
Winowiecka J.
,
Dyner M.
), s. 173--180
artykuł:
Impact of electro slag remelting on 14 109 steel properties
(
Pribulova A.
,
Futáš P.
,
Kmita A.
,
Márasová D.
,
Holtzer M.
), s. 181--185
artykuł:
The Effect of Water Mist Cooling of Casting Die on the Solidification, Microstructure and Properties of AlSi20 Alloy
(
Władysiak R.
,
Kozuń A.
,
Pacyniak T.
), s. 187--194
artykuł:
Identification of the steel viscosity and dynamic yield stress for the numerical modelling of casting simulations in the semi-solid state
(
Solek K.
), s. 195--200
artykuł:
Pearlitic Lamellae Spheroidisation During Austenitization and Subsequent Temperature Hold
(
Hauserova D.
,
Dlouhy J.
,
Kover M.
), s. 201--204
artykuł:
Interaction mechanism of non-metallic particles with crystallization front
(
Żak P. L.
,
Kalisz D.
,
Rączkowski G.
), s. 205--210
artykuł:
Structural Transition in SrZnO Laser Pulse Deposited Alloy
(
Albrithen H. A.
,
Elnaggar M.
,
Ozga K.
,
Szota M.
,
Alahmed Z. A.
,
Alanazi A. Q.
,
Alshahrani H.
,
Alfaifi E.
,
Djouadi M. A.
,
Labis J. P.
), s. 211--216
artykuł:
Effect of structural relaxations within the amorphous structure on the magnetic properties of amorphous tapes from FeCoB family
(
Szota M.
), s. 217--222
artykuł:
Formation of microstructure and properties of Cu-3Ti alloy in thermal and thermomechanical processes
(
Szkliniarz A.
), s. 223--230
artykuł:
Kinetics of pearlite spheroidization
(
Matusiewicz P.
,
Augustyn-Nadzieja J.
,
Czarski A.
,
Skowronek T.
), s. 231--234
artykuł:
The fixed-effects analysis of the relation between SDAS and carbides for the airfoil blade traces
(
Pietraszek J.
,
Szczotok A.
,
Radek N.
), s. 235--239
artykuł:
Effect of hot isostatic pressing on the microstructure of turbine blade airfoil made of nickel-base superalloy
(
Chmiela B.
,
Kościelniak B.
,
Cwajna J.
), s. 241--245
artykuł:
Evaluation of Carbides in Turbine Blade Made of IN713C Superalloy After Hot Isostatic Pressing
(
Kościelniak B.
,
Roskosz S.
,
Cwajna J.
), s. 247--252
artykuł:
Quantitative Evaluation of Porosity in Turbine Blades Made of IN713C Superalloy After Hot Isostatic Pressing
(
Roskosz S.
), s. 253--258
artykuł:
Incorporation of the Pore Size Variation to Modeling of the Elastic Behavior of Metallic Open-Cell Foams
(
Ćwieka K.
,
Wejrzanowski T.
,
Kurzydłowski K. J.
), s. 259--262
artykuł:
Quantitative analysis of stability of 9%Cr steel microstructure after long-term ageing
(
Golański G.
,
Jasak J.
,
Zieliński A.
,
Kolan C.
,
Urzynicok M.
,
Wieczorek P.
), s. 263--271
artykuł:
Forecasting the distribution of precipitate diameters in the presence of changes in the structure of the material
(
Zieliński A.
,
Miczka M.
,
Golański G.
), s. 273--280
artykuł:
The effect of alloying method on the structure and properties of sintered stainless steel
(
Dudek A.
,
Lisiecka B.
,
Ulewicz R.
), s. 281--287
artykuł:
Copper droplets agglomeration/coagulation in the conditions similar to industrial ones
(
Wołczyński W.
,
Sypien A.
,
Tarasek A.
,
Bydałek A. W.
), s. 289--296
artykuł:
The characteristic of deformability and quantitative description of the microstructure of hot-deformed Ni-Fe superalloy
(
Ducki K. J.
,
Rodak K.
,
Mendala J.
,
Wojtynek L.
), s. 297--302
artykuł:
Determination of pearlite morphology in high-carbon hot rolled steel
(
Szala J.
,
Kuc D.
), s. 303--308
artykuł:
Effect of intensive cooling of alloy AM60 with chromium and vanadium additions on cast microstructure and mechanical properties
(
Rapiejko C.
,
Pisarek B.
,
Pacyniak T.
), s. 309--314
artykuł:
Induction hardening of tool steel for heavily loaded aircraft engine components
(
Rokicki P.
), s. 315--320
artykuł:
Welding thermal cycle-triggered precipitation processes in steel S700MC subjected to the thermo-mechanical control processing
(
Górka J.
), s. 321--326
artykuł:
The influence of manual metal arc multiple repair welding of long operated waterwall on the structure and hardness of the heat affected zone of welded joints
(
Pikuła J.
,
Łomozik M.
,
Pfeifer T.
), s. 327--333
artykuł:
Influence of additives in core-forming mixture
(
Vasková I.
,
Hrubovčáková M.
,
Conev M.
), s. 335--338
artykuł:
Utilisation of mould temperature change in eliminating the Al5FeSi phases in secondary AlSi7Mg0.3 alloy
(
Bolibruchová D.
,
Richtárech L.
,
Dobosz S. M.
,
Major-Gabryś K.
), s. 339--344
artykuł:
Development of hot tearing evaluation method for Al-based alloys
(
Brůna M.
), s. 345--349
artykuł:
Elasticity of cores manufactured in cold box technology
(
Dobosz S. M.
,
Grabarczyk A.
,
Major-Gabryś K.
,
Bolibruchova D.
), s. 351--354
artykuł:
Reinforcing cast iron with composite insert
(
Dulska A.
,
Studnicki A.
,
Szajnar J.
), s. 355--357
artykuł:
Influence of the reclamation method of spent moulding sands on the possibility of creating favourable conditions for gases flow in a mould
(
Łucarz M.
,
Drożyński D.
), s. 359--364
artykuł:
Solid-liquid interface morphology of white carbide eutectic during directional solidification
(
Trepczyńska-Łent M.
), s. 365--368
artykuł:
The thermal and structural analysis of new bicomponent binders for moulding sands consisting of furfuryl resin and polycaprolactone (PCL)
(
Major-Gabryś K.
,
Bobrowski A.
,
Grabarczyk A.
,
Dobosz S. M.
), s. 369--372
artykuł:
Effect of parameters of high-pressure die casting on occurrence of casting nonconformities in sleeves of silumin alloy EN AB 47100
(
Pałyga Ł.
,
Stachowicz M.
,
Granat K.
), s. 373--378
artykuł:
Influence of sand base preparation on properties of chromite moulding sands with sodium silicate hardened with selected methods
(
Stachowicz M.
,
Granat K.
,
Pałyga Ł.
), s. 379--383
artykuł:
Shaping optimal zinc coating on the surface of high-quality ductile iron casting. Part I – Moulding technologies vs. zinc coating
(
Szczęsny A.
,
Kopyciński D.
,
Guzik E.
), s. 385--390
artykuł:
Shaping optimal zinc coating on the surface of high-quality ductile iron casting. Part II – Technological formula and value of diffusion coefficient
(
Kopyciński D.
,
Guzik E.
,
Szczęsny A.
), s. 391--395
artykuł:
Study of the precipitation hardening process in recycled Al-Si-Cu cast alloys
(
Kuchariková L.
,
Tillová E.
,
Matvija M.
,
Belan J.
,
Chalupová M.
), s. 397--403
artykuł:
Electrophoretic deposition of nc-TiO2/chitosan composite coatings on X2CrNiMo17-12-2 stainless steel
(
Ledwig P.
,
Kot M.
,
Moskalewicz T.
,
Dubiel B.
), s. 405--410
artykuł:
Effect of Remelting of the Ni-22Cr-9Mo Alloy on its Microstructural and Electrochemical Properties
(
Augustyn-Nadzieja J.
,
Łukaszczyk A.
,
Loch J.
), s. 411--418
artykuł:
An analysis of the joints’ properties of thick-grained steel welded by the SAW and ESW methods
(
Krawczyk R.
), s. 419--426
artykuł:
Silver Matrix Composite Reinforced by Aluminium-Silver Intermetallic Phases
(
Wloch G.
,
Skrzekut T.
,
Sobota J.
,
Woznicki A.
,
Błaż L.
), s. 427--434
artykuł:
Optimization of a thin-walled element geometry using a system integrating neural networks and finite element method
(
Golewski P.
,
Gajewski J.
,
Sadowski T.
), s. 435--442
artykuł:
Selection of basic position in Refill Friction Stir Spot Welding of 2024-T3 and D16UTW aluminum alloy sheets
(
Lacki P.
,
Derlatka A.
,
Gałaczyński T.
), s. 443--449
rozwiń roczniki
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.