The impacts of additive manufacturing technology on lean manufacturing

• Autorzy: Driouach L. , Zarbane K. , Beidouri Z.

Identyfikatory

DOI

10.5604/01.3001.0053.9641

• Języki publikacji: EN

Abstrakty

EN

Purpose: This paper aims to investigate how the use of 3D printing can facilitate the achievement of lean manufacturing objectives. The main goal of the study is to identify the similarities between the two concepts and evaluate how well they complement each other in terms of improving quality, productivity and reducing costs by eliminating waste. Design/methodology/approach: During this study, the methodology involved conducting a thorough and comprehensive examination of existing literature on lean manufacturing and additive manufacturing. The aim was to provide an overview of the relationship between these two concepts and gain insights into areas that require further research. Findings: Results obtained indicate a need for more comprehensive and detailed examination of the relationship between lean manufacturing and additive manufacturing in the existing literature. The study highlights the potential synergy between 3D printing and lean manufacturing, suggesting that their integration can enhance quality, productivity, and cost reduction through waste elimination. However, it is important to note that further empirical research is required to validate these findings and quantify the actual impact of combining these two concepts. Research limitations/implications: This study’s limitation is that it relies exclusively on a literature review and does not include any experimental testing to verify the suggested connection between lean manufacturing and additive manufacturing. Practical implications: This study can help companies understand how the use of 3D printing can aid in achieving lean manufacturing objectives. Additionally, the study can provide insights into best practices for combining lean manufacturing and additive manufacturing and can help companies to optimise the benefits of both. Originality/value: The conducted literature review provides valuable insights into the relationship between 3D printing and lean manufacturing. This research contributes to the existing body of knowledge by synthesising and analysing previous studies, highlighting how 3D printing can potentially contribute to the achievement of lean manufacturing goals and how those two concepts can complement each other.

Słowa kluczowe

EN

additive manufacturing; lean manufacturing; lean objectives; 3D printing; waste

PL

technologie przyrostowe; produkcja odchudzona; druk 3D; odpady

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2023
• Tom: Vol. 120, nr 1
• Strony: 22--32
• Opis fizyczny: Bibliogr. 31 poz., rys.

Twórcy

autor

Driouach L.

• National High School for Electricity and Mechanic, Casablanca, Morocco

• https://orcid.org/0000-0002-4750-1393

autor

Zarbane K.

• Laboratory of Advanced Research on Industrial and Logistic Engineering, National Higher School of Electricity and Mechanics, Hassan II University of Casablanca, Casablanca, Morocco

• https://orcid.org/0000-0002-6048-5279

autor

Beidouri Z.

• Laboratory of Advanced Research on Industrial and Logistic Engineering, National Higher School of Electricity and Mechanics, Hassan II University of Casablanca, Casablanca, Morocco

Bibliografia

• [1] J. Jiang, S.T. Newman, R.Y Zhong, A review of multiple degrees of freedom for additive manufacturing machines. International Journal of Computer Integrated Manufacturing 34/2 (2021) 195‑211. DOI: https://doi.org/10.1080/0951192X.2020.1858510
• [2] A.-L. Antomarchi, S. Durieux, E. Duc, Additive manufacturing impact on the supply chain: overview and diagnoses, Logistique and Management 28/1 (2020) 29‑47 (in French). DOI: https://doi.org/10.1080/12507970.2019.1682950
• [3] F. Sini, Lean management in Additive manufacturing: A methodological proposal for quality control, MSc Thesis, Politechnic of Turin, Turin, 2020. Available from: https://webthesis.biblio.polito.it/14001/1/tesi.pdf
• [4] C.E. Zawaski, C.A. Chatham, E.M. Wilts, T.E. Long, C.B. Williams, Using fillers to tune material properties of an ion-containing semi-crystalline polyethylene glycol) for fused filament fabrication additive manufacturing, Additive Manufacturing 39 (2021) 101844. DOI: https://doi.org/10.1016/j.addma.2021.101844
• [5] P. Ribeiro, J.C. Sá, L.P. Ferreira, F.J.G. Silva, M.T. Pereira, G. Santos, The Impact of the Application of Lean Tools for Improvement of Process in a Plastic Company: A case study, Procedia Manufacturing 38 (2019) 765-775. DOI: https://doi.org/10.1016/j.promfg.2020.01.104
• [6] C. Roriz, E. Nunes, S. Sousa, Application of Lean Production Principles and Tools for Quality Improvement of Production Processes in a Carton Company, Procedia Manufacturing 11 (2017) 1069-1076. DOI: https://doi.org/10.1016/j.promfg.2017.07.218
• [7] L. Driouach, B. Zitouni, K. Zarbane, Proposing a Lean Manufacturing Framework Adapted to Very Small Businesses: Multiple Case Studies, International Journal of Technology 14/3 (2023) 460-473. DOI: https://doi.org/10.14716/ijtech.v14i3.5417
• [8] V. Querard, Production of large aeronautical parts by WAAM additive manufacturing, PhD Thesis, Central School of Nantes, Nantes, 2019 (in French).
• [9] K.S. Prakash, T. Nancharaih, V.V.S. Rao, Additive Manufacturing Techniques in Manufacturing – An Overview. Materials Today: Proceedings 5/2/1 (2018) 3873-3882. DOI: https://doi.org/10.1016/j.matpr.2017.11.642
• [10] D.L. Bourell, J.J Beaman, M.C. Leu, D.W. Rosen, A brief history of additive manufacturing and the 2009 roadmap for additive manufacturing: looking back and looking ahead, Proceedings of the US-Turkey Workshop on Rapid Technologies, Istambul, Turkey, 2009, 5-11.
• [11] O. Aourik, M. Othmani, B. Saadouki, Kh. Abouzaid, A. Chouaf, Fracture toughness of ABS additively manufactured by FDM process, Journal of Achievements in Materials and Manufacturing Engineering 109/2 (2021) 49-58. DOI: https://doi.org/10.5604/01.3001.0015.6258
• [12] M.J. Cotteleer, 3D opportunity: Additive manufacturing paths to performance, innovation, and growth, SIMT Additive Manufacturirng Symposium, 2014, 23.
• [13] M. Mrówka, M. Szymiczek, J. Lenża, Thermoplastic polyurethanes for mining application processing by 3D printing, Journal of Achievements in Materials and Manufacturing Engineering 95/1 (2019) 13-19. DOI: https://doi.org/10.5604/01.3001.0013.7620
• [14] J. Geraedts, E. Doubrovski, J. Verlinden, M. Stellingwerff, Three views on additive manufacturing: business, research and education, Proceedings of TMCE 2012, Karlsruhe, Germany, 2012, 1-15.
• [15] S.M. Rajkumar, Effet of infill pattern and build orientation on machanical properties of FDM printed parts : An experimental modal analysis, arXiv preprint arXiv:2202.05692 (2022) 1-14. DOI: https://doi.org/10.48550/arXiv.2202.05692
• [16] P. Baras, J. Sawicki, Numerical analysis of mechanical properties of 3D printed aluminium components with variable core infill values, Journal of Achievements in Materials and Manufacturing Engineering 103/1 (2020) 16-24. DOI: https://doi.org/10.5604/01.3001.0014.6912
• [17] 3D printing. Promising opportunities for production (in French). Available from: https://fnh.ma/article/-/impression-3d-des-debouches-prometteurs-pour-la-production
• [18] 3D Printing Market Size, Growth, Trends (2022-2027) Industry Forecasts (in French). Available from: https://www.mordorintelligence.com/fr/industry-reports/3d-printing-market (access in:05.11.2022)
• [19] A.S. Martin, 3D printing makes its way to Morocco (in French). Available from: https://www.lavieeco.com/affaires/limpression-3d-se-fait-une-place-au-maroc/
• [20] D.E.P. Klenam, O.S. Bamisaye, I.E. Williams, J.W. van der Merwe, M.O. Bodunrin, Global perspective and African outlook on additive manufacturing research - an overview, Manufacturing Review 9 (2022) 35-37. DOI: https://doi.org/10.1051/mfreview/2022033
• [21] F. Sini, G. Bruno, P. Chiabert, F.A. Segonds, Lean Quality Control Approach for Additive Manufacturing, in F. Nyffenegger, J. Ríos, L. Rivest, A. Bouras (eds), Product Lifecycle Management Enabling Smart X “PLM 2020”, IFIP Advances in Information and Communication Technology, vol 594, Springer, Cham, 59-69. DOI: https://doi.org/10.1007/978-3-030-62807-9_6
• [22] L. Driouach, K. Zarbane, Z. Beidouri, Literature Review of Lean Manufacturing in Small and Medium-sized Enterprises, International Journal of Technology 10/5 (2019) 930-941. DOI: https://doi.org/10.14716/ijtech.v10i5.2718
• [23] J.P. Womack, D.T. Jones, D. Roos, The machine that changed the world, Simon and Schuster, New York, 1990.
• [24] A. Ghobadian, I. Talavera, A. Bhattacharya, V. Kumar, J.A. Garza-Reyes, N. O’Regan, Examining legitimatisation of additive manufacturing in the interplay between innovation, lean manufacturing and sustainability, International Journal of Production Economics 219 (2020) 457‑468. DOI: https://doi.org/10.1016/j.ijpe.2018.06.001
• [25] B.Torres, B. Naghshineh, G. Cardeal, D. Filipe, H. Carvalho, P. Peças, I. Ribeiro, The Impacts of Additive Manufacturing Technology on Lean/Green Supply Chain Management Practices, in: M. Rossi, M. Rossini, S. Terzi (eds), Proceedings of the 6th European Lean Educator Conference “ELEC 2019”, Lecture Notes in Networks and Systems, vol 122, Springer, Cham, 159‑168. DOI: https://doi.org/10.1007/978-3-030-41429-0_16
• [26] N. Inoque, L. de Faria, R. Muñoz, Additive Manufacturing towards the Fabrication of Greener Electrochemical Sensors for Antioxidants, Journal of the Brazilian Chemical Society 33/7 (2022) 753-761. DOI: https://doi.org/10.21577/0103-5053.20220025
• [27] J.R. Díaz-Reza, J.L. García-Alcaraz, L.J.M. Figueroa, R.P.I. Vidal, J.C.S.D. Muro, Relationship between lean manufacturing tools and their sustainable economic benefits, The International Journal of Advanced Manufacturing Technology 123/3-4 (2022) 1269-1284. DOI: https://doi.org/10.1007/s00170-022-10208-0
• [28] A.I. Ezzeldin, T.A. Mohamed, K.S. Abdallah, Improving the productivity of an assembly production line utilising lean tools and simulation: a case study, International Journal of Six Sigma and Competitive Advantage 14/2 (2022) 227-246. DOI: https://doi.org/10.1504/IJSSCA.2022.124977
• [29] M. Bianchi, P. Åhlström, Additive manufacturing: towards a new operations management paradigm?, Procedings of the 20 th International EurOMA Conference, Palermo, Italy, 2014, 1-10.
• [30] M. Kurdve, K.E. Persson, M. Widfeldt, J. Berglund, A. Drott, Lead-Time Effect Comparison of Additive Manufacturing with Conventional Alternatives, Procedings of the 9 th Swedish Production Symposium “SPS2020”, online, 2020, 672-679. DOI: https://doi.org/10.3233/ATDE200207
• [31] L. Driouach, M.E. Oumami, Z. Beidouri, K. Zarbane, Towards Implementing Lean Manufacturing in Very Small Businesses in Morocco: Qualitative Exploratory Study, International Journal of Supply Chain Management 9/6 (2020) 34-48. DOI: https://doi.org/10.59160/ijscm.v9i6.4864

Uwagi

PL

Opracowanie rekordu ze środków MNiSW, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2024).