Description of Surface Topography of Metal Matrix Composite Castings

• Autorzy: Gawdzińska K. , Bryll K. , Gucma M. , Pijanowski M.
• Języki publikacji: EN

Abstrakty

EN

The paper presents studies of topography of the metal matrix composite castings using profilography, confocal microscopy and atomic force microscopy. The examined materials were composites from the ex-situ group, manufactured by the saturation of reinforcement (aluminosilicate or carbon) with the liquid aluminum alloy (AlSi9 or AlSi11). The materials were observed on the various surface state, resulting from different stages of preparation of the polished section for the metallographic between the composite matrix and reinforcement.

Słowa kluczowe

EN

metal matrix composites; surface topography; profilography; confocal microscopy; atomic force microscopy (AFM)

PL

kompozyty metalowe; topografia powierzchni; profilograf; mikroskopia konfokalna; mikroskopia sił atomowych

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2014
• Tom: Vol. 14, iss. 1 spec.
• Strony: 169--174
• Opis fizyczny: Bibliogr. 9 poz., rys., wykr.

Twórcy

autor

Gawdzińska K.

• Institute of Basic Technical Sciences, Maritime University of Szczecin, s. Waly Chrobrego 1/2, 70-500 Szczecin, Poland

autor

Bryll K.

• Institute of Basic Technical Sciences, Maritime University of Szczecin, s. Waly Chrobrego 1/2, 70-500 Szczecin, Poland

autor

Gucma M.

• Center of Marine Traffic Engineering, Maritime University of Szczecin, s. Waly Chrobrego 1/2, 70-500 Szczecin, Poland

autor

Pijanowski M.

• Institute of Basic Technical Sciences, Maritime University of Szczecin, s. Waly Chrobrego 1/2, 70-500 Szczecin, Poland

Bibliografia

• [1] Hillig W.B.: Making ceramic composites by melt infiltration. American Ceramic Society Bulletin, Vol. 73 (1994), No. 4, pps. 56–62.
• [2] Malinowski P., Suchy J.S., Database for foundry engineers – simulation DB – a modern database storing simulation results, Journal of Achievements in Materiale Manufacturing Engineering, 43, pp. 349–352 (2012).
• [3] Sobczak J., Metal matrix composites, Institute of Foundry and Institute of Motor Transport, Cracow – Warsaw 2001 (in Polish).
• [4] Cholewa M., Heat flow description during crystallization process of cast dispersive composites, Archives of Foundry Engineering, 1(7) (2007).
• [5] Suresh S., Mortensen A., Needleman A., Fundamentals of Metal Matrix Composites, Butterworth-Heinemann, Stoneham 1993.
• [6] Clyne T.W., Withers P.J., An Introduction to Metal Matrix Composites, Cambridge University Press, Cambridge 1993.
• [7] Gawdzińska K.: Homogeneity of particle size in the space of composite suspension casting. Archives of Foundry Engineering, vol. 10, Special Issue 1/2010, pps. 163-168.
• [8] Blanchard C.R. Atomic Force Microsopy, The Chemical Educator 1(5) 1996.
• [9] Weeb R.H., Confocal microskcopes, Opt Photon, News 2, 1991, pp. 8-13.