Research on the Production Process of High-Strength Products from Aluminum-Magnesium Alloys for their Direct Processing into Sheets Via Cold Rolling

• Autorzy: Ściężor W. , Mamala A. , Kowal R. , Kwaśniewski P. , Franczak K. , Strzępek P.

Identyfikatory

DOI

10.24425/amm.2019.130117

• Języki publikacji: EN

Abstrakty

EN

Modern metal forming processes of non-ferrous metals, particularly aluminum and its alloys, are increasingly based on integrated technologies combining numerous operations in one process line. The subject of this paper focuses on the possibility of using materials after mould casting (simulating a continuous casting process between cylindrical crystallizers - Twin Roll Casting method) for the direct cold rolling process. As a part of this research a pilotage study on metallurgical synthesis and mould casting process of Al-Mg alloys with the magnesium contents of 5%-10%, testing their mechanical, electrical and structural properties as well as susceptibility to cold plastic deformation. This process was carried out with the measurement of strength parameters and confirmed the possibility of cold rolling alloys with a casting structure without prior hot deformation.

Słowa kluczowe

EN

aluminum alloys; twin roll casting; cold rolling; hardness

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2019
• Tom: Vol. 64, iss. 4
• Strony: 1487--1493
• Opis fizyczny: Bibliogr. 20 poz., fot., rys., wzory

Twórcy

autor

Ściężor W.

• AGH University of Science and Technology, Faculty of Non-Ferrous Metals, Department of Metal Working and Physical Metallurgy of Non-Ferrous Metals, al. A. Mickiewicza 30, 30-059 Kraków, Poland

autor

Mamala A.

• AGH University of Science and Technology, Faculty of Non-Ferrous Metals, Department of Metal Working and Physical Metallurgy of Non-Ferrous Metals, al. A. Mickiewicza 30, 30-059 Kraków, Poland

autor

Kowal R.

• AGH University of Science and Technology, Faculty of Non-Ferrous Metals, Department of Metal Working and Physical Metallurgy of Non-Ferrous Metals, al. A. Mickiewicza 30, 30-059 Kraków, Poland

autor

Kwaśniewski P.

• AGH University of Science and Technology, Faculty of Non-Ferrous Metals, Department of Metal Working and Physical Metallurgy of Non-Ferrous Metals, al. A. Mickiewicza 30, 30-059 Kraków, Poland

autor

Franczak K.

• AGH University of Science and Technology, Faculty of Non-Ferrous Metals, Department of Metal Working and Physical Metallurgy of Non-Ferrous Metals, al. A. Mickiewicza 30, 30-059 Kraków, Poland

autor

Strzępek P.

• AGH University of Science and Technology, Faculty of Non-Ferrous Metals, Department of Metal Working and Physical Metallurgy of Non-Ferrous Metals, al. A. Mickiewicza 30, 30-059 Kraków, Poland

Bibliografia

• [1] R. A. Grandon, High Strength Aluminum-Magnesium Alloys Thermomechanical Processing Microstructure And Tensile Mechanical Properties, Naval Postgraduate School, Monterey, California (1979).
• [2] M. Niedziński, Advanced Aluminium Armor Alloys, Light Metal. Age, 34-36 (2016).
• [3] W. A. Gooch, M. S. Burkins, R. J. Squillacioti, Ballistic Testing Of Commercial Aluminum Alloys And Alternate Processing Techniques To Increase The Availability Of Aluminum Armor, 23RD International Symposium On Ballistics Tarragona, 981-988 (2007).
• [4] M. Król, T. Tański, P. Snopiński, B. Tomiczek, Structure and properties of aluminium-magnesium casting alloys after heat treatment, J. Therm. Anal. Calorim. 127, 299-308, (2017).
• [5] A. A. Canales, E. Carrera, J. Talamantes-Silva, S. Valtierra, R. Cola’s, Mechanical properties in as-cast and heat treated Al-Si-Cu alloys, Int. J. Microstruct. Mater. Prop. 7 (4), 281-300 (2012).
• [6] S. Jayalakshmi, Q. Dezhi, S. Sankaranarayanan, M. Gupta, Microstructure and mechanical properties of Mg-Al alloys with in situ Al4C3 phase synthesised by CO2 incorporation during liquid state processing, Int. J. Microstruct. Mater. Prop. 8 (4/5), 283-98 (2013).
• [7] R. G. Allan, Applications for Aluminum Alloys in the Marine Industry a Current Perspective, Proceedings of Alumitech 97, Atlanta, 20-23 May, 292 (1997).
• [8] W. Ściężor, G. Kiesiewicz, R. Kowal, K. Franczak, J. Grzebinoga, A. Mamala, P. Kwaśniewski, Examination of mechanical and electrical properties and structure of selected aluminum alloy sheets produced from TRC semi-products, Archives of Metallurgy and Materials 62, 4, 2237-2245 (2017).
• [9] D. V. Edmonds, Innovation in the processing of tonnage materials: examples from the steel and aluminium industries, Journal of Materials Processing Technology 83, 1-13 (1998).
• [10] R. Cook, P. G. Grocock, P. M. Thomas, D. V. Edmonds, J. D. Hunt, Development of the twin-roll casting process, Journal of Material Processing Technology 55, 76-84 (1995).
• [11] P. F. Thomson, N. M. Burman, Edge cracking in hot-rolled Al-Mg alloys, Materials Science and Engineering 45, 1, 95-107 (1980).
• [12] B. H. Kim, J. Y. Lee, Y. O. Yoon, S. K. Kim, Effects of Mg and Mn Contents on Hot-Rolling Temperature and Resultant Tensile Properties of Al-Mg-Mn Alloys, Materials Science Forum 877, 334-339 (2017).
• [13] D. Kikuchia, Y. Haradab, S. Kumaib, Surface quality and microstructure of Al-Mg alloy strips fabricated by vertical-type high-speed twin-roll casting, Journal of Manufacturing Processes 37, 332-338 (2019).
• [14] Praca zbiorowa (Multi-author work), Poradnik aluminium (Aluminium handbook), WNT, Warszawa (1967).
• [15] A. Mamala, Model wielodrutowych monomateriałowych elektroenergetycznych przewodów napowietrznych (Model of multiwire monomaterial overhead power lines), Akapit, Kraków (2012).
• [16] L. Yuan, L. Peng, J. Han, B. Liu, Y. Wu, J. Chen, Effect of Cu addition on microstructures and tensile properties of high-pressure die-casting Al-5.5Mg-0.7Mn alloy, Journal of Materials Science and Technology (2018), https://doi.org/10.1016/j.jmst.2018.11.024.
• [17] W. L. Roberts, Cold rolling of steel, Marcel Dekker, New York (1983).
• [18] W. L Roberts, Computing the coefficient of friction in roll bite from mill data, Blast Furnace and Steel Plant 55, 499-508 (1967).
• [19] B. Avitzur, An Upper-Bound Approach to Cold-Strip Rolling, Journal of Manufacturing Science and Engineering: ASME DC 86 (1), 31-45 (1964).
• [20] B. Avitzur, Metal forming: processes and analysis, McGraw Hill, USA (1968).

Uwagi

EN

Research have been financed from the project: “Nowa generacja wysokowytrzymałych wyrobów walcowanych ze stopów lekkich aluminium - magnez” which is implemented by the consortium of the AGH University of Science and Technology and INNOAGH Sp. z o.o. under POIR2014-2020, Operation 4.4 - Increasing the human resources potential of R&D.