PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

A concept of in-process measurement system for spline forming

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
In the paper a possibility of in-process inspection of gear and spline shafts during forming was discussed. Different methods of forming toothed elements were discussed as well as the other technologies were mentioned. Coordinate measurement technique as a way of post process inspection was presented. However, it is not possible to use it for checking features during forming process. To do it different sensors were used and their combinations were described.
Słowa kluczowe
Twórcy
  • Poznan University of Technology, Poznan, Poland
autor
  • Hexagon Metrology, Wetzlar, Germany
autor
  • Hexagon Metrology, Wetzlar, Germany
autor
  • University of Vigo, Vigo, Spain
Bibliografia
  • [1] Neugebauer R., Putz M., Hellfritzsch U., Improved process design and quality for gear manufacturing with flat and round rolling, CIRP Annals, 56/1, 307-312, 2007.
  • [2] Guenther A., Peters J., Numerical description of surfaces [in German], VDI-Berichte, 1880, 2001.
  • [3] Koenig W., Steffens K., Gear production by cold forming, CIRP Annals, 34, 481-483, 1985.
  • [4] Krapfenbauer H., Cold rolled precision toothed elements [in German], VDI-Berichte, 107-112, 1979.
  • [5] Weck M., Koenig W., Bartsch B., Production of involut-toothed gears by cold rolling, Repp. Conf. Proc., SME, 125-132, 1981.
  • [6] Eichner K.W., Dimension analytical considerations regarding cylinders [in German], PhD Thesis, THDarmstadt, Institut fuer Umformtechnik, 1981.
  • [7] Marciniak Z., Kopacz Z., New rotary metalworking processes developed in Poland, II International Conference on Rotary Metalworking Processes, 1982.
  • [8] Schmoeckel D., Hauk P., Development of a combined press-roll strategy to manufacture toothed forms [in German], VDI-Z Integrierte Produktion, 138, 46-48, 1996.
  • [9] Sladek J., Accuracy of coordinate measurements [in Polish], Cracow University of Technology, 2012.
  • [10] Goch G., Guenther A., Future Gear Metrology, VDIBerichte, 1665, 751-768, 2003.
  • [11] Budzik G. (ed.): Determination of momentary contact trace of gears using rapid prototyping [in Polish], Rzeszow University of Technology Press, Rzeszow, 2011.
  • [12] Lindner I., Eichner T., Sladek J., Wieczorowski M., In-Process quality control in metal forming of splined machine elements, 11th International Symposium on Measurement and Quality Control, Krakow - Kielce, 2013, ID 194.
  • [13] Fraden J., AIP Handbook of Modern Sensors: Physics, Designs and Application, AIP American Institute of Physics Press, New York, 1993.
  • [14] Dobosz M., Laser diode distance measuring interferometer - metrological properties, Metrology and Measurement Systems, XIX/3, 553-564, 2012.
  • [15] Kleeman L., Kuc R., An Optimal Sonar Array for Target Localization and Classification, IEEE International Conference on Robotics and Automation, San Diego, 3130-3135, 1994.
  • [16] Pedrick M., Tittmann B.R., Ultrasonic micrometer position indicator with temperature compensation, Ultrasonics Symposium IEEE, 1199-1202, 2004.
  • [17] Mathia T.G., Pawlus P., Wieczorowski M., Recent trends in surface metrology, Wear, 271, 3-4, 494-508, 2011.
  • [18] Wieczorowski M., Mathia T., Carras S., Smierzchalski D., Surface topography inspection in multi-sensor approach, MOTSP 2014, Bol, Croatia, 2014, ID 147.
  • [19] Goch G., Gear Metrology, Annals of the CIRP, 50, 659-695, 2001.
  • [20] Brosed F.J., Aguilar J.J., Guillomia D., Santolaria J., 3D Geometrical Inspection of Complex Geometry Parts Using a Novel Laser Triangulation Sensor and a Robot, Sensors, 90-110, 2011.
  • [21] Gan Z., Tang Q., Visual Sensing and its application - Integration of Laser Sensors to Industrial Robots, Advanced Topics in Science and Technology in China, Springer & Zhejiang University Press, 2011.
  • [22] Eichner T., Finding of geometrical parameters as a base of in-process metrology system in WPM gear forming, PhD Thesis, Cracow University of Technology, 2013.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-3ea62a59-ae54-4a51-b037-e86a80e6b8eb
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.