The influence of self-doping of stibnite ore with impurities on the preparation, heat capacity, magnetic and transport properties of tetrahedrite Cu₁₂Sb₄S₁₃

• Autorzy: Chen Yuqi , Li Liang , Zhang Qianjun , Zhang Congzheng , Hirai Shinji

Identyfikatory

DOI

10.2478/msp-2020-0049

• Języki publikacji: EN

Abstrakty

EN

Stibnite mineral (mainly Sb₂S₃) has been employed for the synthesis of tetrahedrite Cu₁₂Sb₄S₁₃ bulk material by spark plasma sintering. High purity Cu₁₂Sb₄S₁₃ can be quickly obtained by two sintering procedures at temperatures from the range of 420 °C to 440 °C for 1 h. Appropriate reduction of Cu content (Cu_12+xSb₄S₁₃, x ⩽ –0.05) or CuS content (Cu_12−ySb₄S_13−y, y = 0.1 or 0.3) was beneficial to fabricate Cu₁₂Sb₄S₁₃. The secondary resintering improved the purity of Cu₁₂Sb₄S₁₃ material. The first-order magnetic phase transformation with magnetic hysteresis effect was confirmed by the behavior of susceptibility, heat capacity and resistivity. The magnetization showed a linear increase with increasing field (up to 7 T) and non-saturation behavior was observed. The impurities in stibnite mineral Sb₂S₃ had a weak influence on the transformation temperature but affected the low-temperature magnetization value (~0.15, close to natural tetrahedrite). Similar transformation was observed by the analysis of heat capacity. The properties such as electrical resistivity, Seebeck coefficient and thermal conductivity were also measured for Cu_11.9Sb₄S₁₃ and Cu_11.9Sb₄S_12.9. The maximum figure of merit ZT of Cu_11.9Sb₄S_12.9 was 0.22 at 367 K.

Słowa kluczowe

EN

tetrahedrite; Cu12Sb4S13; phase transition; magnetization; heat capacity

• Wydawca: De Gruyter
• Czasopismo: Materials Science Poland
• Rocznik: 2020
• Tom: Vol. 38, No. 3
• Strony: 484--492
• Opis fizyczny: Bibliogr. 34 poz., rys., tab.

Twórcy

autor

Chen Yuqi

• School of Mechanical Engineering, Shanghai Dian Ji University, Shanghai, 201306, China
• Department of Material Science and Engineering, Muroran Institute of Technology, Muroran 050-8585, Japan

autor

Li Liang

• School of Mechatronics Engineering, Nanyang Normal University, Henan, 473061, China
• Department of Material Science and Engineering, Muroran Institute of Technology, Muroran 050-8585, Japan

autor

Zhang Qianjun

• School of Mechanical Engineering, Shanghai Dian Ji University, Shanghai, 201306, China

autor

Zhang Congzheng

• School of Mechatronics Engineering, Nanyang Normal University, Henan, 473061, China

autor

Hirai Shinji

• Department of Material Science and Engineering, Muroran Institute of Technology, Muroran 050-8585, Japan

Bibliografia

• [1] YANG M., SU T., ZHU H., LI S., HU M., HU Q., MA H., JIA X., J. Mater. Sci., 53 (2018), 11524.
• [2] ZHU H., SU T., LI H., PU C., ZHOU D., ZHU P., WANG X., J. Eur. Ceram. Soc., 37 (2017), 1541.
• [3] WANG J., GU M., BAO Y., LI X., CHEN L., J. Electron. Mater., 45 (2016), 2274.
• [4] LU X., MORELLI D.T., Phys. Chem. Chem. Phys., 15 (2013), 5762.
• [5] MAY A.F., DELAIRE O., NIEDZIELA J.L., LARACURZIO E., SUSNER M.A., ABERNATHY D.L., KIRKHAM M., MCGUIRE M.A., Phys. Rev. B, 93 (2016), 064104.
• [6] LU X., MORELLI D.T., XIA Y., ZHOU F., OZOLINS V., CHI H., ZHOU X., UHER C., Adv. Energy Mater., 3 (2013), 342.
• [7] SUEKUNI K., TSURUTA K., ARIGA T., KOYANO M., Appl. Phys. Express, 5 (2012), 051201.
• [8] SUEKUNI K., TSURUTA K., KUNII M., NISHIATE H., NISHIBORI E., MAKI S., OHTA M., YAMAMOTO A., KOYANO M., J. Appl. Phys., 113 (2013), 043712.
• [9] LU X., MORELLI D., J. Electron. Mater., 43 (2014), 1983.
• [10] HEO J., LAURITA G., MUIR S., SUBRAMANIAN M.A., KESZLER D.A., Chem. Mater., 26 (2014), 2047.
• [11] LARACURZIO E., MAY A.F., DELAIRE O., MCGUIRE M.A., LU X., LIU C.Y., CASE E.D., MORELLI D.T., J. Appl. Phys., 115 (2014), 193515.
• [12] DI BENEDETTO F., BERNARDINI G., CIPRIANI C., EMILIANI C., GATTESCHI D., ROMANELLI M., Phys. Chem. Miner., 32 (2005), 155.
• [13] BOUYRIE Y., CANDOLFI C., OHORODNIICHUK V., MALAMAN B., DAUSCHER A., TOBOLA J., LENOIR B., J. Mater. Chem. C, 3 (2015), 10476.
• [14] SUN F.H., WU C.F., LI Z., PAN Y., ASFANDIYAR, DONG J., LI J.F., RSC Adv., 7 (2017), 18909.
• [15] LEVINSKY P., VANEY J.-B., CANDOLFI C., DAUSCHER A., LENOIR B., HEJTMÁNEK J., J. Electron. Mater., 45 (2016), 1351.
• [16] LU X., MORELLI D.T., MRS Commun., 3 (2013), 129.
• [17] TIPPIREDDY S., CHETTY R., NAIK M.H., JAIN M., CHATTOPADHYAY K., MALLIK R.C., J. Phys. Chem. C, 122 (2018), 8735.
• [18] SUEKUNI K., TOMIZAWA Y., OZAKI T., KOYANO M., J. Appl. Phys., 115 (2014), 143702.
• [19] WELLER D.P., KUNKEL G.E., OCHS A.M., MORELLI D.T., ANDERSON M.E., Mater. Today Phys., 7 (2018), 1.
• [20] SOBOLEV A.V., PRESNIAKOV I.A., NASONOVA D.I., VERCHENKO V.Y., SHEVELKOV A.V., J. Phys. Chem. C, 121 (2017), 4548.
• [21] BOUYRIE Y., SASSI S., CANDOLFI C., VANEY J.-B., DAUSCHER A., LENOIR B., Dalton T., 45 (2016), 7294.
• [22] SUN F.H., DONG J., DEY S., WU C.F., PAN Y., TANG H., LI J.F., Sci. China Mater., 9 (2018), 1209.
• [23] NASONOVA D.I., SOBOLEV A.V., PRESNIAKOV I.A., ANDREEVA K.D., SHEVELKOV A.V., J. Alloy. Compd., 778 (2019), 774.
• [24] HUANG L.L., WANG Y.S., ZHU C., XU R., LI J.M., ZHANG J.H., LI D., WANG Z.M., WANG L., SONG C.J., XIN H.X., ZHANG J., QIN X.Y., J. Alloy. Compd., 769 (2018), 478.
• [25] KUMAR D.P., CHETTY R., FEMI O., CHATTOPADHYAY K., MALAR P., MALLIK R., J. Electron. Mater., 46 (2017), 2616.
• [26] SUEKUNI K., LEE C.H., TANAKA H.I., NISHIBORI E., NAKAMURA A., KASAI H., MORI H., USUI H., OCHI M., HASEGAWA T., Adv. Mater., (2018), 1706230.
• [27] LU X., MORELLI D.T., XIA Y., OZOLINS V., Chem. Mater., 27 (2015), 408.
• [28] SKINNER B.J., LUCE F.D., MAKOVICKY E., Econ. Geol. 67 (1972), 924.
• [29] WELCH A.W., ZAWADZKI P.P., LANY S., WOLDEN C.A., ZAKUTAYEV A., Sol. Energy Mat. Sol. C., 132 (2015), 499.
• [30] KITAGAWA S., SEKIYA T., ARAKI S., KOBAYASHI T.C., ISHIDA K., KAMBE T., KIMURA T., NISHIMOTO N., KUDO K., NOHARA M., J. Phys. Soc. Jpn., 84 (2015), 093701.
• [31] BENEDETTO DI F., BERNARDINI G.P., BORRINI D.,EMILIANI C., CIPRIANI C., DANTI C., CANESCHI A., GATTESCHI D., ROMANELLI M., Can. Mineral., 40 (2002), 837.
• [32] NASONOVA D.I., VERCHENKO V.Y., TSIRLIN A.A., SHEVELKOV A.V., Chem. Mater., 28 (2016), 6621.
• [33] LU X., YAO W., WANG G., ZHOU X., MORELLI D., ZHANG Y., CHI H., HUI S., UHER C., J. Mater. Chem. A, 4 (2016), 17096.
• [34] TANAKA H.I., SUEKUNI K., UMEO K., NAGASAKI T., SATO H., KUTLUK G., NISHIBORI E., KASAI H., TAKABATAKE T., J. Phys. Soc. Jpn., 85 (2015), 014703.