Effect of Heat Treatment on the Microstructures 20%Cr-21%Ni-5%Si Cast Steel

• Autorzy: Kalandyk B. , Kasińska J. , Olejnik E.
• Języki publikacji: EN

Abstrakty

EN

The study describes the effect of heat treatment on the microstructure of cast high-alloyed 20%Cr-21%Ni-5%Si steel. It has been found that the microstructure of the tested material in the initial state consists of an austenitic matrix and precipitates rich in Si, Cr, Ni and Mn, characterized by different morphology and distributed mainly along the grain boundaries. The conducted heat treatment (after solutioning at: 1060, 1100 and 1200ºC) has changed both morphology and chemical composition of the precipitates. Significant reduction in the Si and Ni content and slight increase in the Cr content, especially after solutioning at 1200°C, combined with a simultaneous decrease in the hardness of the precipitates was evidenced.

Słowa kluczowe

EN

austenitic cast steel; stainless steel; cast steel microstructure; heat treatment

PL

staliwo austenityczne; stal nierdzewna; mikrostruktura staliwa; obróbka termiczna

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2015
• Tom: Vol. 15, iss. 2 spec.
• Strony: 39--42
• Opis fizyczny: Bibliogr. 9 poz., rys., tab., wykr.

Twórcy

autor

Kalandyk B.

• Department of Cast Alloys and Composites Engineering, Faculty of Foundry Engineering AGH, 23 Reymonta Str., 30-059 Krakow, Poland

autor

Kasińska J.

• Department of Metal Science and Materials Technology, Kielce University of Technology, al. Tysiąclecia Państwa Polskiego 7, 25-314 Kielce, Poland

autor

Olejnik E.

• Department of Cast Alloys and Composites Engineering, Faculty of Foundry Engineering AGH, 23 Reymonta Str., 30-059 Krakow, Poland