Failure Assessment of Steel-Concrete Composite Column Under Blast Loading

• Autorzy: Budziak M. , Garbowski T.
• Języki publikacji: EN

Abstrakty

EN

Composite column as a key structural member can be subjected to a blast load as a result of an accident or a terrorist threat. In this paper, a method for assessing the blast resistance of a composite concrete-filled column is proposed. Moreover, different methods of enhancing composite member resistance to explosions are investigated. The blast situation is modeled in the FEM software using the CONWEP tool. This empirical formulation is relatively cheap from the computational point of view, as well as precise enough, hence it was chosen for this work purposes. Material models are based on well known elasto-plastic with linear hardening concepts. Important phenomenons are also taken into account, such as: contact formulation between the column components, strain rate dependence, damage initiation and evolution. Simulations are conducted for the most common type of explosion – surface blast. Its main feature is the effect of reflection of the ground surface and hence, amplification of the blast wave after the charge ignition. Results are presented in terms of minimum TNT mass equivalent required for a column member failure.

Słowa kluczowe

EN

composite column; blast loading; failure assessment analysis

PL

obciążenie impulsem wybuchu; słup zespolony; wykres zniszczenia

• Wydawca: Instytut Podstawowych Problemów Techniki PAN
• Czasopismo: Engineering Transactions
• Rocznik: 2014
• Tom: Vol. 62, iss. 1
• Strony: 61--84
• Opis fizyczny: Bibliogr. 28 poz., rys., tab., wykr.

Twórcy

autor

Budziak M.

• Poznan University of Technology Institute of Structural Engineering Piotrowo 5, 60-965 Poznań, Poland

autor

Garbowski T.

• Poznan University of Technology Institute of Structural Engineering Piotrowo 5, 60-965 Poznań, Poland

Bibliografia

• 1. Bazant Z.P., Concrete fracture models: Testing and practice, Engineering Fracture Mechanics, 69, 165–205, 2001.
• 2. Bischoff P.H., Perry S.H., Compressive behaviour of concrete at high strain rates, Materials and Structures, 24, 425–450, 1991.
• 3. Chock J.M.K., Kapania R.K., Review of two methods for calculating explosive air blast, Shock and Vibration Digest, 33, 91–102, 2001.
• 4. Courant R., Friedrichs K., Lewy H., On the partial difference equations of mathematical physics, IBM Journal of Research and Development, 11, 215–234, 1967.
• 5. Cowper G.R., Symond P.S., Strain Hardening and Strain Rate Effects in the Impact Loading of Cantilever Beams, Applied Mathematics Report No. 28, Brown University, Providence, Rhode Island, USA, 1957.
• 6. Dassault Systemes, Abaqus 6.11 Documentation, 2011.
• 7. Drucker D.C., Prager W., Soil mechanics and plastic analysis or limit design, Quart. Appl. Math., 10, 157–165, 1952.
• 8. Gajewski T., Garbowski T., Calibration of concrete parameters based on digital image correlation and inverse analysis, Archives of Civil and Mechanical Engineering, 14, 1, 170–180, 2014.
• 9. Gajewski T., Garbowski T., Mixed experimental/numerical methods applied for concrete parameters estimation, Proceedings of XX International Conference on Computer Methods in Mechanics CMM2013, Recent Advances in Computational Mechanics, T. Łodygowski, J. Rakowski, P. Litewka [Eds.], 293–302, CRC Press, 2014.
• 10. Garbowski T., Maier G., Novati G., Diagnosis of concrete dams by flat-jack tests and inverse analyses based on proper orthogonal decomposition, Journal of Mechanics of Materials and Structures, 6, 1–4, 181–202, 2011.
• 11. Georgin J.F., Reynouard J.M., Modeling of structures subjected to impact: Concrete behaviour under high strain rate, Cement and Concrete Composites, 25, 131–143, 2003.
• 12. Goyal S., Pinson E.N., Sinden F.W., Simulation of dynamics of interacting rigid bodies including friction I: General problem and contact model, Engineering with Computers, 10,162–174, 1994.
• 13. Gurson A.L., Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I – Yield Criteria and Flow Rules for Porous Ductile Materials, Journal of Engineering Materials and Technology, 99, 2–15, 1997.
• 14. Herv G., Gatuingt, F., Ibrahimbegovi A., On numerical implementation of a coupled rate dependent damage-plasticity constitutive model for concrete in application to high-rate dynamics, Engineering Computations (Swansea, Wales), 22, 583–604, 2005.
• 15. Hillerborg A., Modeer M., Petersson P.E., Analysis of Crack Formation and Crack Growth in Concrete by Means of Fracture Mechanics and Finite Elements, Cement and Concrete Research, 6, 773–782, 1976.
• 16. Huntington-Thresher W., Cullis I.G., TNT blast scaling for small charges, Proceedings of 19th Int. Sym. on Ballistics, Interlaken, Switzerland, 647–654, 2001.
• 17. Kingery C.N., Bulmash G., Airblast parameters from TNT spherical air burst and hemispherical surface burst. Technical Report ARBRL-TR-02555, U.S. Army Ballistic Research Laboratory, 1984.
• 18. Lee J., Fenves G.L., Plastic-damage model for cyclic loading of concrete structures, Journal of Engineering Mechanics, 124, 892–900, 1998.
• 19. Lubliner J., Oliver J., Oller S., Oate E., A plastic-damage model for concrete, International Journal of Solids and Structures, 25, 299–326, 1989.
• 20. Zirpoi A., Novati G., Maier G., Garbowski T., Dilatometric tests combined with computer simulations and parameter identification for in-depth diagnostic analysis of concrete dams, Proceedings of the International Symposium on Life-Cycle Civil Engineering IAL-CCE ’08, CRC Press, 259–264, 2008.
• 21. McAllister T.P., Gross J.L., Sadek F., Kirkpatrick S., MacNeill R.A., Zarghamee M., Erbay O.O., Sarawit A.T., Analysis of structural response of WTC 7 to fire and sequential failures leading to collapse, Journal of Structural Engineering, 138,1, 109–117, 2012.
• 22. Neuberger A., Peles S., Rittel D., Scaling the response of circular plates subjected to large and close-range spherical explosions. Part II: Buried charges, International Journal of Impact Engineering, 34, 874–882, 2007.
• 23. Ngo T., Mendis P., Gupta A., Ramsay J., Blast loading and blast effects on structures – An overview, Electronic Journal of Structural Engineering, 7, 76–91, 2007.
• 24. Rodriguez-Nikl T., Lee C.-S., Hegemier G.A., Seible F., Experimental performance of concrete columns with composite jackets under blast loading, Journal of Structural Engineering, 138, 1, 81–89, 2012.
• 25. Ross C. Allen, Thompson P.Y., Tedesco J.W., Split-Hopkinson pressure-bar tests on concrete and mortar in tension and compression, ACI Materials Journal, 86, 475–481,1989.
• 26. Rule W.K., Jones S.E., A Revised Form for the Johnson-Cook Strength Model, International Journal of Impact Engineering, 21, 609–624, 1989.
• 27. Soutis C., Mohamed G., Hodzic A.,Modelling the structural response of GLARE panels blast load, Composite Structures, 94, 267–276, 2011.
• 28. The MathWorks, Inc., Matlab R2011a Documentation, 2011.