Influence of the face width and length of contact on teeth deformation and stiffness

• Autorzy: Medvecká-Beňová S.

Identyfikatory

DOI

10.20858/sjsutst.2016.91.10

• Języki publikacji: EN

Abstrakty

EN

Gear teeth are deformed due to load. Recently, given the increasingly evolving computer technology, supported by the available literature, we have modern numerical methods at our disposal, such as the finite element method (FEM), which serves as one of the methods for the determination of teeth deformation in the gearing. This paper mainly deals with deformation distribution across the teeth’s face width in relation to the load width of the teeth when meshing occurs. The solution for teeth deformation of spur gears is provided by the FEM.

Słowa kluczowe

EN

spur gear; teeth deformation; finite element method; stiffness; face width

PL

koło zębate; deformacja zębów; metoda elementów skończonych; sztywność

• Wydawca: Wydawnictwo Politechniki Śląskiej
• Czasopismo: Zeszyty Naukowe. Transport / Politechnika Śląska
• Rocznik: 2016
• Tom: z. 91
• Strony: 99--106
• Opis fizyczny: Bibliogr. 4 poz.

Twórcy

autor

Medvecká-Beňová S.

• Faculty of Mechanical Engineering, Department of Construction, Automotive and Transport Engineering, Technical University of Košice, 9 Letná Street, 042 00 Košice, Slovakia

Bibliografia

• 1. Alfonso Fernandez del Rincon, Fernando Viadero, M. Iglesias, Pablo García, A. de-Juan, Ramon . Sancibrian. 2013. „A model for the study of meshing stiffness in spur gear transmissions.” Mechanism and Machine Theory 61: 30-58. ISSN: 0094- 114X.
• 2. Medvecká-Beňová S. 2011. „Deformácia a tuhosť čelného ozubenia“. [In Slovak: “Spur deformation and stiffness]. Strojárstvo 15(12): 8-9. ISSN: 1335-2938.
• 3. Medvecká-Beňová S., P. Frankovský, R. Grega. 2015. „Influence gearing parameters on the tooth deformation of spur gears“. Applied Mechanics and Materials 816: 27-30. ISSN: 1660-9336.
• 4. Satiepka M., V. Dekýš, P. Pastorek. 2014. „Using active thermography and lock-in method with ultrasound excitation for detection of material defects“. Scientific Journal of Silesian University of Technology. Series Transport 84: 119-124. ISSN: 0209-3324.

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę