Role of the Molybdenum Addition on the Mechanical Properties and Structure of the NiCoMnIn Alloys

• Autorzy: Prusik K. , Matyja E. , Wąsik M. , Zubko M.

Identyfikatory

DOI

10.24425/amm.2019.127606

• Języki publikacji: EN

Abstrakty

EN

In this paper, the influence of Mo addition on the structure and mechanical properties of the NiCoMnIn alloys have been studied. Series of polycrystalline NiCoMnIn alloys containing from 0 to 5 mas.% of Mo were produced by the arc melting technique. For the alloys containing Mo, two-phase microstructure was observed. Mo-rich precipitates were distributed randomly in the matrix. The relative volume fraction of the precipitates depends on the Mo content. The numbers of the Mo rich precipitates increases with the Mo contents. The structures of the phases were determined by the TEM. The mechanical properties of the alloys are strongly affected by Mo addition contents. Brittleness of the alloys increases with the Mo contents.

Słowa kluczowe

EN

MSMA; martensite; structure; NiCoMnIn; additions; shape memory

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2019
• Tom: Vol. 64, iss. 2
• Strony: 733--738
• Opis fizyczny: Bibliogr. 22 poz., fot., rys., tab.

Twórcy

autor

Prusik K.

• University of Silesia, Insitute of Materials Science, 75 Pułku Piechoty 1a Str., 41-500 Chorzów, Poland
• Silesian Centre for Education and Interdisciplinary Research, 12 Bankowa Str., 40-007 Katowice, Poland

autor

Matyja E.

• University of Silesia, Insitute of Materials Science, 75 Pułku Piechoty 1a Str., 41-500 Chorzów, Poland
• Silesian Centre for Education and Interdisciplinary Research, 12 Bankowa Str., 40-007 Katowice, Poland

autor

Wąsik M.

• University of Silesia, Insitute of Materials Science, 75 Pułku Piechoty 1a Str., 41-500 Chorzów, Poland

autor

Zubko M.

• University of Silesia, Insitute of Materials Science, 75 Pułku Piechoty 1a Str., 41-500 Chorzów, Poland
• Silesian Centre for Education and Interdisciplinary Research, 12 Bankowa Str., 40-007 Katowice, Poland
• University of Hradec Králové, Department of Physics, Hradec Králové, Czech Republic

Bibliografia

• [1] K. Ulakko et. al., Mater. J. Mater. Engin. Perform. 5, 405-409 (1996), doi:10.1007/BF02649344.
• [2] A. Sozinov, A. A. Likhachev, N. Lanska, K. Ullakko, Appl. Phys. Lett. 80, 1746-1748 (2002), doi: 10.1063/1.1458075.
• [3] R. Kainuma, Y. Imano, W. Ito, Y. Sutou, Magnetic-field-induced shape recovery by reverse phase transformation, Nature 439, 957-960 (2006), doi:10.1038/nature04493.
• [4] H. Morawiec, T. Goryczka, A. Drdzeń, J. Lelątko, K. Prusik, Texture analysis of hot rolled Ni-Mn-Ga alloys, Solid State Phenomena 154, 133-138 (2009)
• [5] K. Prusik, K. Bałdys, D. Stróż, T. Goryczka, J. Lelątko, Hot Extrusion of Ni-Based Polycrystalline Ferromagnetic Shape Memory Alloys, Solid State Phenomena 203-204, 306-309 (2013), doi:10.4028/www.scientific.net/SSP.203-204.306.
• [6] S. Tamirisakandala, R. B. Bhat, J. S. Tiley, D. B. Miracle, Grain refinement of cast titanium alloys via trace boron addition, Scr. Mater. 53, 1421-1426 (2005).
• [7] M. Ramudu, A. Satish Kumar, V. Seshubai, Influence of boron addition on the microstructure, structural and magnetic properties of Ni53.5Mn26.0Ga20.5 alloy, Intermetallics 28, 51-57 (2012), doi:10.1016/j.intermet.2012.03.060.
• [8] S. N. Ghali, H. S. El-Faramawy, M. M. Eissa, J. Miner. Mater. Character. Engin., Influence of Boron Additions on Mechanical Properties of Carbon Steel 11, 995-999 (2012).
• [9] K. Prusik, E. Matyja, M. Kubisztal, M. Zubko, R. Swadźba, Magnetic Properties and Structure of the Ni-Co-Mn-In Alloys with the Boron Addition, Acta Physica Polonica 131, 1240-1243 (2017).
• [10] T. Krenke, E. Duman, M. Acet, X. Moya, L. Manosa, A. Planes, Effect of Co and Fe ~ on the inverse magnetocaloric properties of Ni-Mn-Sn, J. Appl. Phys. 102, 033903 (2007).
• [11] C. Jing, Z. Li, H. L. Zhang, J. P. Chen, Y. F. Qiao, S. X. Cao, J. C. Zhang, Martensitic transition and inverse magnetocaloric effect in Co doping NieMneSn Heulser alloy, Eur. Phys. J. B 67, 193-196 (2009).
• [12] B. Emre, N. M. Bruno, S. Yuce Emre, I. Karaman, Effect of niobium addition on the martensitic transformation and magnetocaloric effect in low hysteresis NiCoMnSn magnetic shape memory alloys, Appl. Phys. Lett. 105, 231910 (2014).
• [13] X. Ding, X. Li, H. Huang, W. Matthias, S. Huang, Q, Feng, Effect of Mo addition on as-cast microstructures and properties of grey cast irons, Materials Science & Engineering A 718, 483-491 (2018).
• [14] Q. Wu, C. Yang, F. Xue, Y. Sun, Effect of Mo addition on the microstructure and wear resistance of in situ TiC/Al composite Materials and Design 32, 4999-5003 (2011).
• [15] Y. Chen, H. C. Jiang, S. W. Liu, L. J. Rong, X. Q. Zhao, The effect of Mo additions to high damping Ti-Ni-Nb shape memory alloys, Materials Science and Engineering A 512, 26-31 (2009).
• [16] Y Al-Zain, H. Y. Kim, T. Koyano, H. Hosoda, T. H. Nam, S. Miyazaki, Anomalous temperature dependence of the superelastic behavior of Ti-Nb-Mo alloys, Acta Materialia 59, (4) 1464-1473 (2011).
• [17] T. Maeshima, S. Ushimaru, K. Yamauchi, M. Nishida, M. Nishida, Effects of Sn Content and Aging Conditions on Superelasticity in Biomedical Ti-Mo-Sn Alloys, Journal of the Japan Institute of Metals 47 (3), 513-517 (2006).
• [18] H. Y. Kim, Y. Ohmatsu, J. I. Kim, H. Hosoda, S. Miyazaki, Mechanical Properties and Shape Memory Behavior of Ti-Mo-Ga Alloys, Materials Trasactions 45, 4, 1090-1095 (2004).
• [19] Y. Ru, S. Li, J. Zhou, Y. Pei, H. Wang, S. Gong, H. Xu, Dislocation network with pair coupling structure in {111} γ/γ′ interface of Ni-based single crystal superalloy, Scientific Reports 6, 2994, 1, 1-9 (2016), DOI: 10.1038/srep29941.
• [20] T. Akatsu, R. Scholz, U. Gosele, Dislocation structure in low-angle interfaces between bonded Si (001) wafers, Journal of Materials Science 39, 3031-3039 (2004).
• [21] X. Tian, K. Zhang, C. Tan, E. Guo, Influence of Doping Tb on the Mechanical Properties and Martensitic Transformation of Ni-Mn-Sn Magnetic Shape Memory Alloys, Crystals 8, 247, 1-11 (2018), doi:10.3390/cryst8060247.
• [22] K. Prusik, B. Kostrubiec, T. Goryczka, G. Dercz, P. Ochin, H. Morawiec, Materials Science and Engineering A 481-482, 330-333 (2008).

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).