PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Influence of electromagnetic riveting process on microstructures and mechanical properties of 2A10 and 6082 Al riveted structures

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Electromagnetic riveting (EMR) technology had unique connection advantages compared to traditional riveting methods. The influence of EMR process on microstructures and mechani- cal properties for 2A10 and 6082 aluminum riveted structures was investigated by comparison with regular pressure riveting (RPR) process. The microstructures and mechanical properties of the two riveting processes were analyzed by optical microscopy and tensile testing machine, respectively. The micro-hardness and the interference amount were also investi- gated. The results showed that the main characteristic of the driven head was the shear zone. The grain deformation of the EMR in shear zone was more severe than that of the RPR. The width of the shear zone of the RPR was larger than that of the EMR. The trend of micro- hardness distribution was opposite along the direction of the shear zone. Meanwhile, the distribution of the interference amounts of EMR had a better uniformity. The failure mecha- nisms of shear tests of the EMR and RPR were same, but the pull-out tests were different. The dynamic loading had a great influence on the microstructures and mechanical properties of riveted structures, and the mechanical properties of EMR were significantly enhanced.
Rocznik
Strony
1284--1294
Opis fizyczny
Bibliogr. 24 poz., rys., tab., wykr.
Twórcy
  • State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, Hunan University, Changsha, 410082, China
autor
  • Capital Aerospace Engineering Machinery Company, Beijing 100076, China
autor
  • State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, Hunan University, Changsha, 410082, China
autor
  • State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, Hunan University, Changsha, 410082, China
autor
  • State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, Hunan University, Changsha, 410082, China
Bibliografia
  • [1] R. Cacko, Review of different material separation criteria in numerical modeling of the self-piercing riveting process-SPR, Arch. Civ. Mech. Eng. 8 (2) (2008) 21–30.
  • [2] D.Z. Li, L. Han, M. Thornton, M. Shergold, Influence of rivet to sheet edge distance on fatigue strength of self-piercing riveted aluminium joints, Mater. Sci. Eng.: A 558 (2012) 242–252.
  • [3] K. Mori, N. Bay, L. Fratini, F. Micari, A.E. Tekkaya, Joining by plastic deformation, CIRP Ann. Manuf. Technol. 62 (2013) 673–694.
  • [4] P.F. Liu, Z.P. Gu, X.Q. Peng, A nonlinear cohesive/friction coupled model for shear induced delamination of adhesive composite joint, Int. J. Fract. 199 (2016) 135–156.
  • [5] J.S. Liang, H. Jiang, J.S. Zhang, X.H. Wu, X. Zhang, G.Y. Li, J.J. Cui, Investigations on mechanical properties and microtopography of electromagnetic self-piercing riveted joints with carbon fiber reinforced plastics/aluminum alloy 5052, Arch. Civ. Mech. Eng. 19 (1) (2019) 240–250.
  • [6] N.J. Chen, M. Thonnerieux, R. Ducloux, M. Wan, J.L. Chenot, Parametric study of riveted joints, Int. J. Mater. Form. 7 (1) (2014) 65–79.
  • [7] G. Meschut, V. Janzen, T. Olfermann, Innovative and highly productive joining technologies for multi-material lightweight car body structures, J. Mater. Eng. Perform. 23 (5) (2014) 1515–1523.
  • [8] G.Y. Li, H. Jiang, X. Zhang, J.J. Cui, Mechanical properties and fatigue behavior of electromagnetic riveted lap joints influenced by shear loading, J. Manuf. Process. 26 (2017) 226–239.
  • [9] N.J. Chen, H.Y. Luo, M. Wan, J.L. Chenot, Experimental and numerical studies on failure mechanisms of riveted joints under tensile load, J. Mater. Process. Technol. 214 (2014) 2049–2058.
  • [10] H. Mei, D. Zhang, J.C. Xia, L.F. Cheng, Effect of heat treatment on the riveted joints of two-dimensional C/SiC composites, Compos. B: Eng. 120 (2017) 159–167.
  • [11] J. Kafie-Martinez, P.B. Keating, P. Chakra-Varthy, J. Correia, A.D. Jesus, Stress distributions and crack growth in riveted lap joints fastening thick steel plates, Eng. Fail. Anal. 91 (2018) 370–381.
  • [12] J. Peirs, W. Tirry, B. Amin-Ahmadi, F. Coghe, P. Verleysen, L. Rabet, D. Schryvers, J. Degrieck, Microstructure of adiabatic shear bands in Ti6Al4V, Mater. Charact. 75 (2013) 79–92.
  • [13] A. Hadadzadeh, B.S. Amirkhiz, J. Li, A. Odeshi, M. Mohammadi, Deformation mechanism during dynamic loading of an additively manufactured AlSi10Mg_200C, Mater. Sci. Eng.: A 722 (2018) 263–268.
  • [14] L. Wang, J.W. Qiao, S.G. Ma, Z.M. Jiao, T.W. Zhang, G. Chen, D. Zhao, Y. Zhang, Z.H. Wang, Mechanical response and deformation behavior of Al0.6CoCrFeNi high-entropy alloys upon dynamic loading, Mater. Sci. Eng. A 727 (2018) 208–213.
  • [15] V.K.S. Choo, P.G. Reinfiall, S. Ghassaei, Effect of high rate deformation induced precipitation hardening on the failure of aluminum rivets, J. Mater. Sci. 24 (2) (1989) 599–608.
  • [16] E.A. Repetto, R. Radovitzky, M. Ortiz, R.C. Lundquist, D.R. Sandstrom, A finite element study of electromagnetic riveting, J. Manuf. Sci. Eng. Trans. ASME 121 (1999) 61–68.
  • [17] D.G. Feng, Z.Q. Cao, Quality comparing analysis of electromagnetic riveting and pneumatic riveting, Forging Stamping Technol. 37 (2012) 123–126.
  • [18] X. Zhang, M.Y. Zhang, L.Q. Sun, C.F. Li, Numerical simulation and experimental investigations on TA1 titanium alloy rivet in electromagnetic riveting, Arch. Civ. Mech. Eng. 18 (3) (2018) 887–901.
  • [19] M.A. Meyers, Dynamic Behavior of Materials, first ed., Wiley, New York, 1994.
  • [20] QJ 782A-2005, People's Republic of China Aerospace Industry Standard: General Technical Requirements for Riveting, second ed., National Defense Science and Technology Industry Committee, Beijing, 2005.
  • [21] H. Jiang, Y.J. Cong, X. Zhang, G.Y. Li, J.J. Cui, Fatigue degradation after salt spray ageing of electromagnetically riveted joints for CFRP/Al hybrid structure, Mater. Des. 142 (2018) 297–307.
  • [22] X. Zhang, J.J. Cui, G.Y. Li, Microstructural mechanism in adiabatic shear bands of Al-Cu alloy bars using electromagnetic impact upsetting, Mater. Lett. 194 (2017) 62–65.
  • [23] X.H. Miguelez, X. Soldani, A. Molinari, Analysis of adiabatic shear banding in orthogonal cutting of Ti alloy, Int. J. Mech. Sci. 75 (2013) 212–222.
  • [24] X. Zhang, Research on Dynamic Plastic Deformation Behavior and Microstructure and Mechanical Properties of Rivets in Electromagnetic Riveting (Dissertation), Harbin Institute of Technology, 2016.
Uwagi
PL
Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020)
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-3d8dd0f8-1783-484d-880e-ded2901b67cb
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.