Analysis of surface microgeometry and structure of layered biomaterials used for prosthetic constructions in digital technologies

• Autorzy: Ryniewicz Wojciech , Ryniewicz Anna M. , Bojko Łukasz , Leszczyńska-Madej Beata , Ryniewicz Andrzej

Identyfikatory

DOI

10.5604/01.3001.0013.6567

Warianty tytułu

PL

Analiza mikrogeometrii powierzchni i struktury biomateriałów warstwowych stosowanych na konstrukcje protetyczne w technologiach cyfrowych

• Języki publikacji: EN

Abstrakty

EN

Veneering layers of prosthetic substructures are responsible for tribological cooperation with opposite teeth in the stomatognathic system (SS). Investigations of microgeometry and structure of veneering layers are aimed at checking to what extent these layers replicate enamel parameters, which, under complex load conditions, are characterized by the phenomenon of resistance to tribological wear. Ceramic veneering layers are dedicated for substructures made in digital technologies from factory fittings by milling and laser sintering of metal powders. Using a confocal microscope, contactless tests of the surface layer stereometry were performed and surface roughness parameters were determined on samples of ceramics veneering of prosthetic substructures. The analysis was performed in comparison to the natural enamel of premolars and molars. The shaping of the surface of materials veneering the substructures is similar to the regularity determined in the statistical analysis of the enamel roughness. Layers facing samples from milling technology are characterized by lower values of roughness parameters than layers created on substructures made of SLM technology.

PL

Warstwy licujące podbudowy protetyczne są odpowiedzialne za współpracę tribologiczną z zębami przeciwstawnymi w układzie stomatognatycznym (US). Badania mikrogeometrii i struktury warstw licujących mają na celu sprawdzenie, w jakim stopniu warstwy te replikują parametry szkliwa, które w złożonych warunkach obciążeń charakteryzuje się fenomenem odporności na zużycie tribologiczne. Materiałem badań są ceramiczne warstwy licujące dedykowane na podbudowy wykonane w technologiach cyfrowych: z fabrycznych kształtek metodą frezowania oraz technologią spiekania laserowego z proszków metali. Z wykorzystaniem mikroskopu konfokalnego wykonano bezstykowe badania stereometrii warstwy wierzchniej oraz wyznaczono parametry chropowatości powierzchni na próbkach ceramik licujących podbudowy protetyczne. Analizę przeprowadzono w porównaniu ze szkliwem naturalnym zębów przedtrzonowych i trzonowych. Ukształtowanie powierzchni materiałów licujących podbudowy w różnym stopniu zbliża się do regularności wyznaczonej w statystycznej analizie chropowatości szkliwa. Warstwy licujące próbki z technologii frezowania charakteryzują się niższymi wartościami parametrów chropowatości niż warstwy utworzone na podbudowach z technologii SLM.

Słowa kluczowe

EN

prosthetic construction; substructure; veneering layer; microgeometry; structure; roughness

PL

konstrukcja protetyczna; podbudowa; warstwa licująca; mikrogeometria; struktura; chropowatość

• Wydawca: Stowarzyszenie Inżynierów i Techników Mechaników Polskich
• Czasopismo: Tribologia
• Rocznik: 2019
• Tom: nr 5
• Strony: 101--113
• Opis fizyczny: Bibliogr. 34 poz., rys., tab.

Twórcy

autor

Ryniewicz Wojciech

• Jagiellonian University Medical College, Faculty of Medicine, Dental Institute, Department of Dental Prosthodontics, Montelupich 4 Street, 31-155 Cracow, Poland

autor

Ryniewicz Anna M.

• Jagiellonian University Medical College, Faculty of Medicine, Dental Institute, Department of Dental Prosthodontics, Montelupich 4 Street, 31-155 Cracow, Poland

autor

Bojko Łukasz

• AGH University of Science and Technology, Faculty of Mechanical Engineering and Robotics, Mickiewicza 30 Ave., 30-059 Cracow, Poland

autor

Leszczyńska-Madej Beata

• AGH University of Science and Technology, Faculty of Non-Ferrous Metals, Mickiewicza 30 Ave., 30-059 Cracow, Poland

autor

Ryniewicz Andrzej

• State University of Applied Science, Institute of Technology, Zamenhofa 1a Street, 33-300 Nowy Sącz, Poland

Bibliografia

• 1. Malara P., Paluch K., Sobolewska K., Pasieka A.: The study of the connection between the zirconia substructure and veneering porcelain in dental crowns subjected to occlusal forces. Archives of Materials Science, 6(2016), 6.
• 2. Toussi C. A., Ezatpour H. R., Haddadnia J., Shiri J. G.: Effect of using different metal and ceramic materials as restorations on stress distribution around dental implants: a comparative finite element study. Materials Research Express, 5, 11(2018), pp. 115403.
• 3. Malara P., Paluch K., Sobolewska K., Pasieka A.: Assessment of the compressive strength of the metal-ceramic connections in fixed dental restorations. Journal of Achievements in Materials and Manufacturing Engineering, 79, 2(2016), pp. 66–73.
• 4. Ryniewicz W., Ryniewicz A. M.: Analiza modelowa układu stomatognatycznego przy odbudowach z zastosowaniem mostów protetycznych. Przegląd Elektrotechniczny, 91, 5(2015), pp. 17–20.
• 5. Bojko Ł., Ryniewicz W., Ryniewicz A. M., Kot M., Pałka P.: The influence of additive technology on the quality of the surface layer and the strength structure of prosthetic crowns. Tribologia, 4(2018), pp. 13–22.
• 6. Zaher A. M., Hochstedler J. L., Rueggeberg F. A., Kee E. L.: Shear bond strength of zirconia-based ceramics veneered with 2 different techniques. The Journal of prosthetic dentistry, 118, 2(2017), pp. 221–227.
• 7. Kirmali O., Kapdan A., Kustarci A., Er K.: Veneer ceramic to Y-TZP bonding: comparison of different surface treatments. Journal of Prosthodontics, 25, 4(2016), pp. 324–329.
• 8. Fukuyama T., Hamano N., Ino S.: Effects of silica-coating on surface topography and bond strength of porcelain fused to CAD/CAM pure titanium. Dental materials journal, 35, 2(2016), pp. 325–332.
• 9. Bae E. J., Kim H. Y., Kim W. C., Kim J. H.: In vitro evaluation of the bond strength between various ceramics and cobalt-chromium alloy fabricated by selective laser sintering. The journal of advanced prosthodontics, 7, 4(2015), pp. 312–316.
• 10. Han X., Sawada T., Schille C., Schweizer E., Scheideler L., Geis-Gerstorfer J., Spintzyk S.: Comparative analysis of mechanical properties and metal-ceramic bond strength of Co-Cr dental alloy fabricated by different manufacturing processes. Materials, 11, 10(2018), p. 1801.
• 11. Ryniewicz W., Ryniewicz A. M., Bojko Ł.: The effect of a prosthetic crown’s design on the accuracy of mapping an abutment teeth’s shape. Measurement, 91(2016), pp. 620–627.
• 12. Ryniewicz A. M., Bojko Ł., Ryniewicz W. I.: Microstructural and micromechanical tests of titanium biomaterials intended for prosthetic reconstructions. Acta of bioengineering and biomechanics, 18, 1(2016), pp. 121–127.
• 13. Nguyen H. H., Wan S., Tieu K. A., Pham S. T., Zhu, H.: Tribological behaviour of enamel coatings. Wear, 426(2019), pp. 319–329.
• 14. Sinthuprasirt P., van Noort R., Moorehead R., Pollington S.: Evaluation of a novel multiple phase veneering ceramic.Dental Materials, 31, 4(2015), pp. 443–452.
• 15. Papia E., Arnoldsson P., Baudinova A., Jimbo R., Von Steyern P. V.: Cast, milled and EBM-manufactured titanium, differences in porcelain shear bond strength. Dental materials journal, 37, 2(2018), pp. 214–221.
• 16. Sakaguchi R. L., Powers J. M.: Craig's restorative dental materials. Elsevier Health Sciences, Philadelphia 2012.
• 17. Antanasova M., Kocjan A., Kovač J., Žužek B., Jevnikar P.: Influence of thermo-mechanical cycling on porcelain bonding to cobalt–chromium and titanium dental alloys fabricated by casting, milling, and selective laser melting. Journal of prosthodontic research, 62, 2(2018), pp. 184–194.
• 18. Yang J., Kelly J. R., Bailey O., Fischman G.: Porcelain-titanium bonding with a newly introduced, commercially available system. The Journal of prosthetic dentistry, 116, 1(2016), pp. 98–101.
• 19. Guilherme N., Wadhwani C., Zheng C., Chung K. H.: Effect of surface treatments on titanium alloy bonding to lithium disilicate glass-ceramics. The Journal of prosthetic dentistry, 116, 5(2016), pp. 797–802.
• 20. Antanasova M., Jevnikar P.: Bonding of dental ceramics to titanium: processing and conditioning aspects.Current Oral Health Reports, 3, 3(2016), pp. 234–243.
• 21. Sendao I. A., Alves A. C., Galo R., Toptan F., Silva F. S., Ariza E.: The effect of thermal cycling on the shear bond strength of porcelain/Ti–6Al–4V interfaces. Journal of the mechanical behavior of biomedical materials, 44(2015), pp. 156–163.
• 22. Parchańska-Kowalik M., Wołowiec-Korecka E., Klimek L.: Effect of chemical surface treatment of titanium on its bond with dental ceramics. The Journal of prosthetic dentistry, 120, 3(2018), pp. 470–475.
• 23. Golebiowski M., Wolowiec E., Klimek L.: Airborne-particle abrasion parameters on the quality of titaniumceramic bonds. The Journal of prosthetic dentistry, 113, 5(2015), pp. 453–459.
• 24. Qi G., Huiqiang S., Yijun H., Jia C., Weishan D.: Effect of different surface processes on the bond strength between zirconia framework and veneering ceramic. Hua xi kou qiang yi xue za zhi= Huaxi kouqiang yixue zazhi= West China journal of stomatology, 35, 6(2017), pp. 598–602.
• 25. Kanat-Ertürk B., Çömlekoğlu E. M., Dündar-Çömlekoğlu M., Özcan M., Güngör M. A.; Effect of veneering methods on zirconia framework—Veneer ceramic adhesion and fracture resistance of single crowns. Journal of Prosthodontics, 24, 8(2015), pp. 620–628.
• 26. Gautam C., Joyner J., Gautam A., Rao J., Vajtai R.: Zirconia based dental ceramics: structure, mechanical properties, biocompatibility and applications. Dalton Transactions, 45, 48(2016), pp. 19194–19215.
• 27. Grohmann P., Bindl A., Hämmerle C., Mehl A., Sailer I.: Three-unit posterior zirconia-ceramic fixed dental prostheses (FDPs) veneered with layered and milled (CAD-on) veneering ceramics: 1-year follow-up of a randomized controlled clinical trial. Quintessence International, 46, 10(2015), pp. 871–880.
• 28. Pharr S. W., Teixeira E. C., Verrett R., Piascik J. R.: Influence of Veneering Fabrication Techniques and Gas-Phase Fluorination on Bond Strength between Zirconia and Veneering Ceramics. Journal of Prosthodontics, 25, 6(2016), pp. 478–484.
• 29. Craciunescu E., Sinescu C., Negrutiu M. L., Pop D. M., Lauer H. C., Rominu M., Antoniac I.: Shear bond strength tests of zirconia veneering ceramics after chipping repair. Journal of adhesion science and Technology, 30, 6(2016), pp. 666–676.
• 30. Mainjot A. K., Najjar A., Jakubowicz-Kohen B. D., Sadoun M. J.: Influence of thermal expansion mismatch on residual stress profile in veneering ceramic layered on zirconia: Measurement by hole-drilling. Dental Materials, 31, 9(2015), pp. 1142–1149.
• 31. Ryniewicz W., Herman M., Ryniewicz A. M., Bojko Ł., Pałka P., Ryniewicz A., Madej T.: Tribological tests of the nanomaterials used to reconstruct molars and premolars with the application of the direct method. Tribologia, 3(2017), pp. 155–164.
• 32. Ryniewicz W., Herman M., Ryniewicz A. M., Bojko Ł., Pałka P.: Tribological Tests of Nanocomposites for Direct Restoration of Teeth. Tribologia, 4(2018), pp. 97–105.
• 33. Herman M., Ryniewicz A. M., Ryniewicz W.: The analysis of determining factors of enamel resistance to wear. Pt. 1, Identification of biological and mechanical enamel structure and its shape in dental crowns. Engineering of Biomaterials, 13, 95(2010), pp. 10–17.
• 34. Ryniewicz W., Herman M., Ryniewicz A. M.: The analysis of enamel resistance to wear determining factors. Pt. 2, Study of superficial layer and microhardness in tooth enamel. Engineering of Biomaterials, 14, 102(2011), pp. 23–27.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).