PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Cascaded boost converter-based high-voltage pulse generator for pulsed electric field applications

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Food processing technologies for food preservation have been in constant development over a few decades in order to meet current consumer’s demands. Healthy competitive improvements are observed in both thermal and non-thermal food processing technology since past two decades due to technical revolution. Among these novel technologies, pulsed electric field food processing technology has shown to be a potential non-thermal treatment capable of preserving liquid foods. The high-voltage pulse generators specifically find their applications in pulsed electric field technology. So, this paper proposes a new structure of a high-voltage pulse generator with a cascaded boost converter topology. The choice of a cascaded boost converter helps in selecting low DC input voltage and hence the size and space requirement of the high-voltage pulse generator is minimized. The proposed circuit is capable of producing high-voltage pulses with flexibility of an adjusting duty ratio and frequency. The designed circuit generates a maximum peak voltage of 1 kV in the frequency range of 7.5–20 kHz and the pulse width range of 0.8–1.8 μs. Also, the impedance matching between the cascaded boost converter and the high-voltage pulse generator is found simple without further additional components. The efficiency can be improved in the circuit by avoiding low frequency transformers.
Rocznik
Strony
631--641
Opis fizyczny
Bibliogr. 34 poz., rys., tab., wz.
Twórcy
  • Sri Sivasubramaniya Nadar College of Engineering India
autor
  • Sri Sivasubramaniya Nadar College of Engineering India
Bibliografia
  • [1] Nazni P., Shobana Devi R., Effect of Processing on the Characteristics Changes in Barnyard and Foxtail Millet, Journal of Food Processing Technology, vol. 7, no. 3, pp. 1–8 (2016).
  • [2] Khanam A., Platel K., Influence of domestic processing on the bioaccessibility of selenium from selected food grains and composite meals, Journal of Food Science and Technology, vol. 53, no. 3, pp. 1634–1639 (2016).
  • [3] Gabaza M., Shumoy H., Louwagie L., Muchuweti M., Vandamme P., Du Laing G., Raes K., Traditional fermentation and cooking of finger millet: Implications on mineral binders and subsequent bioaccessibility, Journal of Food Composition and Analysis, vol. 68, pp. 87–94 (2018).
  • [4] Sunil Neelash C., Jaivir S., Suresh C., Vipul C., Vikrant K., Non-thermal techniques: Application in food industries-A review, Journal of Pharmacognosy and Phytochemistry, vol. 7, no. 5, pp. 1507–1518 (2018).
  • [5] Nowosad K., Sujka M., Pankiewicz U., Kowalski R., The application of PEF technology in food processing and human nutrition, Journal of Food Science and Technology, vol. 58, pp. 397–411 (2020), DOI: 10.1007/s13197-020-04512-4.
  • [6] Rana Muhammad A., Xin-An Z., Zhong H., Amna S., Anees Ahmed K., Ubaid U.R., Muneeb K., Tariq M., Combined effects of pulsed electric field and ultrasound on bioactive compounds and microbial quality of grapefruit juice, Journal of Food Processing and Preservation, vol. 42, no. 2 (2018), DOI: 10.1111/jfpp.13507 (2018).
  • [7] Ramune B., Gianpiero P., Nerijus L., Saulius S., Pranas V., Giovanna F., Application of pulsed electric field in the production of juice and extraction of bioactive compounds from blueberry fruits and their by-products, Journal of Food Science and Technology, vol. 52, no. 9, pp. 5898–5905 (2015).
  • [8] Carbonell-Capella J.M., Buniowska M., Cortes C., Zulueta A., Frigola A., Esteve M.J., Influence of pulsed electric field processing on the quality of fruit juice beverages sweetened with Stevia rebaudiana, Food and Bioproducts Processing, vol. 101, pp. 214–222 (2017).
  • [9] Caminity I.M., Palgan I., Noci F., Arantxa Muñoz, Whyte P., Cronin D.A., Morgan D.J., Lyng J.G., The effect of pulsed electric fields (PEF) in combination with high intensity light pulses (HILP) on Escherichia coli inactivation and quality attributes in apple juice, Innovative Food Science and Emerging, vol. 12, no. 2, pp. 118–123 (2011).
  • [10] Morales-de la Pena M., Elez-Martinez P., Martin-Belloso O., Food Preservation by Pulsed Electric Fields: An Engineering Perspective, Food Engineering Reviews, vol. 3, pp. 94–107 (2011).
  • [11] Buckow R., Sieh N., Toepfl S., Pulsed electric field processing of orange juice: a review on microbial, enzymatic, nutritional and sensory quality and stability, Comprehensive Reviews in Food Science and Food safety, vol. 12, pp. 455–467 (2013).
  • [12] Toepfl S., Pulsed electric field food processing – Industrial equipment design and commercial applications, Stewart Postharvest Review, vol. 8, pp. 1–7 (2012).
  • [13] Valic B., Muriel Golzio, Mojca Pavlin, Anne Schatz, Cecile Faurie, Weaver J.C., Electroporation of Cells and Tissues, IEEE Transaction on Plasma Science, vol. 28, pp. 24–33 (2000).
  • [14] Toepfl S., Heinz V., Knorr D., High intensity pulsed electric fields applied for food preservation, Chemical Engineering and Processing, vol. 46, pp. 537–546 (2007).
  • [15] Geveke D.J., Kozempel M., Scullen O.J., Brunkhorst C., Radio frequency energy effects on microorganisms in foods, Innovative Food Science and Emerging Technology, vol. 3, no. 2, pp. 133–138 (2002).
  • [16] Geveke D.J., Brunkhorst C., Inactivation of Escherichia coli in apple juice by radio frequency electric fields, Journal of Food Science, vol. 69, pp. 134–138 (2004).
  • [17] Geveke D.J., Brunkhorst C., Fan X., Radio frequency electric fields processing of orange juice, Innovative Food Science and Emerging Technologies, vol. 8, pp. 549–554 (2007).
  • [18] Krishnaveni S., Rajini V., Diode clamped gate driver-based high voltage pulse generator for electroporation, Turkish Journal of Electrical Engineering and Computer Sciences, vol. 26, pp. 2374–2384 (2018).
  • [19] Pokryvailo A., Yankelevich Y., Shapira M., A compact source of sub gigawatt sub-nanosecond pulses, IEEE Transaction on Plasma Science, vol. 32, pp. 1909–1918 (2004).
  • [20] Wu Y., Liu K., Qiu J., X., Xiao H., Repetitive and high voltage Marx generator using solid-state devices, IEEE Transaction on Dielectrics and Electrical Insulation, vol. 14, pp. 937–940 (2007).
  • [21] Ramya R., Raja P.R., Gowrisree V., High Voltage Pulsed Electric Field Application Using Titanium Electrodes for Bacterial Inactivation in Unpurified Water, Japan Journal of Food Engineering, vol. 20, no. 2, pp. 63–70 (2019).
  • [22] Kasri N.N.F., Piah M.A.M., Adzis Z., Compact High-Voltage Pulse Generator for Pulsed Electric Field Applications: Lab-Scale Development, Journal of Electrical and Computer Engineering, vol. 2020, art. ID 6525483, pp. 1–12 (2020), DOI: 10.1155/2020/6525483.
  • [23] Flisara K., Meglica S.H., Morelj J., Golobb J., Miklavcic D., Testing a prototype pulse generator for a continuous flow system and its use for E. coli inactivation and microalgae lipid extraction, Bioelectochemistry, vol. 100, pp. 44–51 (2014).
  • [24] Merensky L.M., Kardo-Sysoev A., Shmilovitz D., Kesar A.S., Efficiency Study of a 2.2 kV, 1 ns, 1 MHz Pulsed Power Generator Based on a Drift-Step-Recovery Diode, IEEE Transactions on Plasma Science, vol. 41, no. 11, pp. 3138–3142 (2013).
  • [25] Zhang Y., Liu J., Cheng X., Zhang H., Bai G., A Way for High-Voltage μs-Range Square Pulse Generation, IEEE Transactions on Plasma Science, vol. 39, no. 4, pp. 1125–1130 (2011).
  • [26] Merla C., Amari S.E., Kenaan M., Liberti M., Apollonio F., Arnaud-Cormos D., Couder V., A 10-Ω High-Voltage Nanosecond Pulse Generator, IEEE Transactions on Microwave Theory and Techniques, vol. 58, no. 12, pp. 4079–4085 (2010).
  • [27] Ndtoungou A., Hamadi A., Missanda A., Al-Haddad K., Modeling and control of a cascaded Boost Converter for a Battery Electric Vehicle, IEEE Electrical Power and Energy Conference, London, ON, Canada, pp. 182–187 (2012).
  • [28] Stala R., Pirog S., DC–DC boost converter with high voltage gain and a low number of switches in multisection switched capacitor topology, Archives of Electrical Engineering, vol. 67, no. 3, pp. 617–627 (2018), DOI: 10.24425/123667.
  • [29] Chen Z., Yong W., Gao W., PI and Sliding Mode Control of a Multi-Input-Multi-Output Boost-Boost Converter, WSEAS Transactions on Power Systems, vol. 9, pp. 87–102 (2014).
  • [30] Sira-Ramirez H., Silva-Origoza R., Control design techniques in power electronics devices, Springer (2006).
  • [31] Aamir M., Shinwari M.Y., Design, implementation and experimental analysis of two-stage boost converter for grid connected photovoltaic system, 3rd IEEE International Conference on Computer Science and Information Technology, Chengdu, China, pp. 194–199 (2010).
  • [32] Park S., Choi S., Soft-switched CCM boost converters with high voltage gain for high power applications, IEEE Transaction on Power Electronics, vol. 25, no. 5, pp. 1211–1217 (2010).
  • [33] Silveira G.C., Tofoli F.L., Bezerra L.D.S., Torrico-Bascope R.P., A nonisolated DC-DC boost converter with high voltage gain and balanced output voltage, IEEE Transaction on Industrial Electronics, vol. 61, no. 12, pp. 6739–6746 (2014).
  • [34] Sanders J.M., Kuthi A., Wu., Y.H., Vernier P.T., Gundersen M.A., A linear, single-stage, nanosecond pulse generator for delivering intense electric fields to biological loads, IEEE Transactions on Dielectrics and Electrical Insulation, vol. 16, no. 4, pp. 1048–1054 (2009).
Uwagi
Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-3d46d914-a3bb-4429-aca2-c7b906666257
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.