Test interface for piezoelectric vibration energy harvesters

• Autorzy: Pękosławski B. , Skibiński P. , Napieralski A.
• Języki publikacji: EN

Abstrakty

EN

The paper presents microcontroller-based interface for testing of piezoelectric vibration energy harvesters testing and measurement of their parameters. The interface is proposed as a low-cost solution for laboratory stands with electrodynamic shakers. The proposed system contains power processing circuits for piezoelectric harvesters. The microcontroller sets circuit interconnections suitable for a given test, controls circuitry operation, acquires measurement results and presents them to a user. The investigated piezoelectric harvester parameters include optimal load resistance, maximum generated power, resonant frequencies and mechanical damping coefficient. Output power gain can be also examined for AC/DC converter topology with nonlinear voltage processing SSHI circuit.

Słowa kluczowe

EN

piezoelectric harvester; vibration energy harvesting; measurement stand; laboratory equipment

PL

harvester piezoelektryczny; odzyskiwanie energii drgań; stanowisko pomiarowe; sprzęt laboratoryjny

• Wydawca: Lodz University of Technology. Department of Microelectronics and Computer Science
• Czasopismo: International Journal of Microelectronics and Computer Science
• Rocznik: 2017
• Tom: Vol. 8, nr 3
• Strony: 116--121
• Opis fizyczny: Bibliogr. 14 poz., il. kolor., fot.

Twórcy

autor

Pękosławski B.

• Department of Microelectronics and Computer Science, Lodz University of Technology, Lodz, Poland

autor

Skibiński P.

autor

Napieralski A.

• Department of Microelectronics and Computer Science, Lodz University of Technology, Lodz, Poland

Bibliografia

• [1] S. Roundy, P.K. Wright, J. Rabaey, "A study of low level vibrations as a power source for wireless sensor nodes", Computer Communications 26 (2003), pp. 1131-1144
• [2] G.K. Ottman, H.F. Hofmann, A.C. Bhatt, G.A. Lesieutre, "Adaptive Piezoelectric Energy Harvesting Circuit for Wireless Remote Power Supply", IEEE Trans. Power Electron., 17, 5 (2002), pp. 669-676
• [3] S. Maurya, P. Suman, M. Radhakrishna, "A Review of Energy Harvesting Techniques for WSN", 2012
• [4] L. Tang, Y. Yang, Ch.K. Soh, Chapter 2: "Broadband Vibration Energy Harvesting Techniques", Advances in Energy Harvesting Methods, 2013, X,455 p., ISBN:978-l-4614-5704-6
• [5] H. Yu J. Zhou, L. Deng, Z. Wen, "A Vibration-Based MEMS Piezoelectric Energy Harvester and Power Conditioning Circuit", Sensors 2014, 14, pp. 3323-3341
• [6] A. Sharma, O.Z. Olszewski, J. Torres, A. Mathewson, R. Houlihan, Fabrication, Simulation and Characterisation of MEMS Piezoelectric Vibration Energy Harvester for Low Frequency, Procedia Engineering 120 (2015), pp. 645-650
• [7] F. Costache, B. Pawlik A. Rieck, Development of a Compact, Low-Frequency Vibration, Piezoelectric MEMS Energy Harvester, Eurosensors 2017 Proceedings, 2017, 1,588
• [8] H. Wang, L. Tang, Y. Guo, X. Shan, T. Xie, "A 2DOF hybrid energy harvester based on combined piezoelectric and electromagnetic conversion mechanism ", J Zhejiang Univ-Sci A (Appl Phys & Eng), 2014, 15(9), pp.711-722
• [9] D. Motter, J.V. Lavarda, F.A. Dias, S. da Siva, "Vibration Energy Harvesting Using Piezoelectric Transducer and NonControlled Rectifiers Circuits", J. of the Braz. Soc. of Mech. Sei. & Eng. Special Issue 2012, Vol. XXXIV, pp. 378-385
• [10] A. Telba, W.G. Ali, "Modeling and Simulation of Piezoelectric Energy Harvesting", Proceedings of the World Congress on Engineering 2012, Vol. II, WCE 2012, July 4 - 6, 2012, London, U.K.
• [11] K. Janczak, "The circuit for amplitude of vibrations generated by electrodynamic shaker and its ambient temperature regulation (Układ do stabilizacji amplitudy drgań generowanych przez wzbudnik elektrodynamiczny oraz temperatury otoczenia wzbudnika)", B. Eng. thesis, Lodz University of Technology, 2011
• [12] M. Lallart, D. Guyomar, "An optimized self-powered switching circuit for non-linear energy harvesting with low voltage output", Smart. Mater. Struct., 17 (2008), pp. 1-8
• [13] B. Pękosławski, P. Pierzak, M. Makowski, A. Napieralski, "Enhancement of Piezoelectric Vibration Energy Harvester Output Power Level for Powering of Wireless Sensor Node in Large Rotary Machine Diagnostic System (extended paper)", Sigma NOT, Elektronika-Konstrukcje, Technologie Zastosowania, R.50, 12, 2009, pp. 31-35, ISSN 0033-2089
• [14] Y.C. Shu, I.C. Lien, "Efficiency of energy conversion for a piezoelectric power harvesting system", J. Micromech. Microeng., 16 (2006), pp. 2429-2438

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).