Modelling the meshing of cycloidal gears

• Autorzy: Nachimowicz J. , Rafałowski S.

Identyfikatory

DOI

10.1515/ama-2016-0021

• Języki publikacji: EN

Abstrakty

EN

Cycloidal drives belong to the group of planetary gear drives. The article presents the process of modelling a cycloidal gear. The full profile of the planetary gear is determined from the following parameters: ratio of the drive, eccentricity value, the equidistant (ring gear roller radius), epicycloid reduction ratio, roller placement diameter in the ring gear. Joong-Ho Shin’s and Soon-Man Kwon’s article (Shin and Know, 2006) was used to determine the profile outline of the cycloidal planetary gear lobes. The result was a scatter chart with smooth lines and markers, presenting the full outline of the cycloidal gear.

Słowa kluczowe

EN

cycloidal drive; modelling; profile; planetary gear; gear

PL

przekładnia cykloidalna; przekładnia planetarna; modelowanie

• Wydawca: Oficyna Wydawnicza Politechniki Białostockiej
• Czasopismo: Acta Mechanica et Automatica
• Rocznik: 2016
• Tom: Vol. 10, no. 2
• Strony: 137--140
• Opis fizyczny: Bibliogr. 15 poz., rys., tab., wykr.

Twórcy

autor

Nachimowicz J.

• Bialystok University of Technology, Department of Mechanical Engineering, Faculty of Mechanical Engineering, ul. Wiejska 45C, 15-351 Białystok, Poland

autor

Rafałowski S.

• Bialystok University of Technology, Department of Mechanical Engineering, Faculty of Mechanical Engineering, ul. Wiejska 45C, 15-351 Białystok, Poland

Bibliografia

• 1. Dai H., Wang X. (2005), Thermo-electro-elastic transient responses in piezoelectric hollow structures, International Journal of Solids and Structures, 42, 1151-1171.
• 2. Filippo de Monte (2006), Multi-layer transient heat conduction using transition time scales, International Journal of Thermal Science, 45, 882–892.
• 3. Liu G., Qu J. (1998), Transient Wave Propagation in a Circular Annulus Subjected to Transient Excitation on Its Outer Surface, Journal of the Acoustical Society of America, 104, 1210–1220.
• 4. Lu X., Tervola P., Viljanen M. (2006), Transient analytical solution to heat conduction in composite circular cylinder, International Journal of Heat and Mass Transfer, 49, 341–348.
• 5. Onyshko L.I., Senyuk M.M. (2009), Stressed state of a hollow twolayer cylinder under dynamic loads, Material Science, 45, 55–61.
• 6. Savruk M., Onyshko L., Senyuk M. (2008), A plane dynamic axisymmetric problem for a hollow cylinder, Materials Science, 1-9.
• 7. Sladek V., Sladek J., Zhang C. (2008), Computation of stresses in non-homogeneous elastic solids by local integral equation method: a comparative study, Computational Mechanics, 41, 827–845.
• 8. Sneddon I. (1951), Fourier transforms, McCraw-Hill Book Company, New York.
• 9. Sulym H., Hutsaylyuk V., Pasternak Ia., Turchyn I. (2013), Stressstrain state of an elastic rectangular plate under dynamic load, Mechanika, 19, 620–626.
• 10. Sulym H., Turchyn І. (2014), Axisymmetric quasistatic thermal stressed state in a half space with coating, Journal of Mathematical Science, 198, 103–117.
• 11. Theotokoglou E., Stampouloglou I. (2008), The radially nonhomogeneous elastic axisymmentric problem, International Journal of Solids and Structures, 45, 6535–6552.
• 12. Turchyn I., Turchyn O. (2013), Transient plane waves in multilayered half-space, Acta Mechanica et Automatica, 7, 53-57.
• 13. Wang X., Lu G., Guillow S. (2002), Stress wave propagation in orthotropic laminated thick-walled spherical shells, International Journal of Solids and Structures, 39, 4027-4037.
• 14. Yin X.C., Yue Z.Q. (2002), Transient plane-strain response of multilayered elastic cylinders to axisymmetric impulse, Journal of Applied Mechanics, 69, 825–835.
• 15. Zhang X., Hasebe N. (1999), Elasticity solution for a radially nonhomogeneous hollow cylinder, Journal of Applied Mechanics, 66, 598–606.

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.