PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Wpływ naprężeń w kierunku grubości elementu na powstanie pęknięcia delaminacjnego w złączach spawanych krzyżowych

Autorzy
Identyfikatory
Warianty tytułu
EN
Stress influence in the direction of element thickness on the initiation of delamination cracking in the cross-welded joints
Języki publikacji
PL
Abstrakty
PL
W artykule przedstawiono wyniki badań eksperymentalnych oraz obliczeń numerycznych dotyczących wpływu naprężeń w kierunku grubości elementu na możliwość występowania pęknięcia delaminacyjnego w złączu spawanym krzyżowym. Badania doświadczalne obejmowały wyznaczenie charakterystyk wytrzymałościowych i odporności na pękanie. Obliczenia numeryczne przeprowadzono na modelu trójwymiarowej próbki SEN(B), obliczono rozkłady naprężeń rozwierających i w kierunku grubości próbki. Wykazano, że przyczyną powstawania pęknięć delaminacyjnych jest obecność pasm wtrąceń niemetalicznych w środkowej strefie grubości materiału rodzimego oraz wysoki poziom lokalnych naprężeń w kierunku grubości próbki.
EN
In the article were presented the results of experimental research and the numerical calculations, concerning influence of stress in the direction of element thickness, on the possibility of delamination cracking occurrence in the cross-welded-joints. The experimental studies included determination of strength and fracture toughness characteristics. Numerical calculations were carried out on a 3D modeled SEN(B) specimen. The distributions of opening stress and stress in the direction of specimen thickness were calculated. It was shown, that the reason of delamination crackinginitiation, was the presence of nonmetallic inclusions bands in the central area of the base material thickness, and the high level of local stresses in the direction of specimen thickness.
Czasopismo
Rocznik
Tom
Strony
5212--5219, CD 2
Opis fizyczny
Bibliogr. 10 poz., rys., tab.
Twórcy
autor
  • Politechnika Świętokrzyska w Kielcach, Wydział Mechatroniki i Budowy Maszyn, KPKM tel.: 41 34 24 307, Al. 1000-lecia PP 7, 25-314 Kielce
autor
  • Politechnika Świętokrzyska w Kielcach, Wydział Mechatroniki i Budowy Maszyn, KPKM tel.: 41 34 24 307, Al. 1000-lecia PP 7, 25-314 Kielce
Bibliografia
  • 1. ASTM E1737-96. Standard Test Method for J-Integral Characterization of Fracture Toughness. Philadelphia; 1996.
  • 2. ASTM E1820-09. Standard Test Method for Measurement of Fracture Toughness. Annual book of ASTM standards; 03.01; 2011: 1070-1118.
  • 3. Blum A., Niezgodziński T., Pęknięcia lamelarne. Biblioteka Problemów Eksploatajci, Radom 2007.
  • 4. E 399-09. Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIC of Metallic Materials. Annual book of ASTM standards; 03.01; 2011: p. 502-534.
  • 5. EN 10025-2:2004, European Standard; 2004.
  • 6. Pała R., Dzioba I., Wpływ delaminacji na poziom odporności na pękanie. Logistyka – nauka 2014 nr 6, str. 8306–8312.
  • 7. Kalyanam S., Beaudoin A. J., Dodds R. H. Jr., Barlat F., Delamination cracking in advanced aluminum–lithium alloys – Experimental and computational studies, Engineering Fracture Mechanics; 76 (2009); p. 2174–2191.
  • 8. Neimitz A., Dzioba I., Pała R., Janus U., The influence of the out-of-plane constraint on fracture toughness of high strength steel at low temperatures, Solid State Phenomena 224 (2015); p. 157-166.
  • 9. Yang Z., Huo Ch., Wanlin Guo W., The Charpy Notch Impact Test of X70 Pipeline Steel with Delamination Cracks, Key Engineering Materials Vols. 297-300 (2005) p. 2391-2396.
  • 10. Perez Ipina J., Korin I., Effects of divider orientation split-out on fracture toughness, 2012 Wiley Publishing Ltd. Fatigue Fract Engng Mater Struct 36, p. 242–253.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-3d231052-3c6c-478e-95c5-4678464e401f
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.