Tytuł artykułu
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
A baby stroller allows the transportation of a child over long or short distances. The materials used to produce the stroller make it heavy for users, which creates difficulties when lifting the stroller. The goal of this project was to design and fabricate a three-dimensional (3D) fabric structure that can be used as part of a stroller seat to improve its mechanical and physical properties. The idea of implementing a woven 3D system allows the development of an egg-shaped or shell-like structure as part of a stroller seat. The combination of double-woven material and honeycomb polypropylene (as the reinforcing material) was used to create a 3D composite structure. Single and double layers of polypropylene honeycomb sandwiched within layers of linen flax fabric were used to prepare the composite samples. Subsequently, tests on mechanical and physical properties, such as density, flexural strength, and tensile strength, were carried out. Analysis of the results showed that the composite with one layer of honeycomb has half the density of polyvinyl chloride.
Czasopismo
Rocznik
Tom
Strony
148--154
Opis fizyczny
Bibliogr. 19 poz.
Twórcy
autor
- Faculty of Material Technologies and Textile Design, Institute of Architecture of Textile, Lodz University of Technology, 116 Zeromskiego Street, 90–924 Lodz, Poland
- Department of Textile Engineering, Kombolcha Institute of Technology, Wollo University, Ethiopia
autor
- Faculty of Material Technologies and Textile Design, Institute of Architecture of Textile, Lodz University of Technology, 116 Zeromskiego Street, 90–924 Lodz, Poland
autor
- Faculty of Material Technologies and Textile Design, Institute of Architecture of Textile, Lodz University of Technology, 116 Zeromskiego Street, 90–924 Lodz, Poland
Bibliografia
- [1] Xiaogang, C. (2015). Advanced in 3D textiles. Woodhead Publishing.
- [2] Pelin Gurkan Unal. (2012). “3D woven fabric.” W woven fabric, Autor: Han-Yong Jeon, 91–120. Turkey: Intech-open publishing.
- [3] Antonio, M. (1999). 3D textile reinforcement in composite materials. Woodhead Publishing.
- [4] N. Khokar. (2001). 3D weaving; theory and practice. Journal of the Textile Institute, 92, 193–207.
- [5] Oliver, D., Thomas, G., Chokri, C. (2014). Modelling of textile composite reinforcement on the micro-scale. AUTEX, 14(1). DOI: 10.2478/v10304-012-0047-z.
- [6] Jinlian, H. (2008). 3D fibrous assemblies; properties, applications and modeling of three-dimensional textile structures. Woodhead Publishing (Cambridge, England).
- [7] Hari, P. K., Behera, B. K. (2010). Woven textile structure; theory and applications. Woodhead Publishing (Cambridge).
- [8] Barburski, M., Urbaniak, M., Samal, S. K. (2019). Comparison of mechanical properties of biaxial and triaxial fabric and composites reinforced by them. Fibers and textiles in Eastern Europe, 2019, 37–44.
- [9] Kamińska A., Barburski, M. (2018). 3D woven fabric with cross rib as a composite reinforcement. IOP Conference Series: Materials Science and Engineering, 460(2018), 012021 IOP Publishing. DOI: 10.1088/1757-899X/460/1/012021.
- [10] Barburski, M., Weigert, L., Fernández, I., Pouplier, S., Roth, S., Huurnink, G. (2017). Woven reinforced composites for improving the design of the hyperextension brace. Journal of Fashion Technology & Textile Engineering, 2017, S3. DOI: 10.4172/2329-9568.S3-002.
- [11] Dapeng, G., Yulin, Y., Suwen, C., Wenwen, S. (2014). A wear geometry model of plain-woven fabric composites. AUTEX, 14(3). DOI: 10.2478/aut-2014-0014.
- [12] Vanleeuw B, Carvelli V, Lomov S.V, Barburski M, Vuure A.W. (2014). Deformability of a flax reinforcement for composite materials. Key Engineering Materials, 611–612, 257–264; Trans Tech Publications, Switzerland. DOI: 10.4028/www.scientific.net/KEM.611-612.257.
- [13] Evgeny, V. M. (2004). Mechanics and analysis of fabric composites and structures. AUTEX, 60–70.
- [14] Nirmal, U., Jin, Z., Sehat, A. R. (2017). State of the art baby strollers. Cogent Engineering, 2017.
- [15] Vanleeuw, B., Carvelli, V., Barburski, M., Lomov, S. V., Aart, W., van Vuure (2015). Quasi-unidirectional flax composite reinforcement: deformability and complex shape forming. Composites Science and Technology, 110, 76–86. DOI: 10.1016/j.compscitech.2015.01b.
- [16] CorexHoneycomb. (2019). Web site: https://corexhoneycomb.co.uk/products%20and%20services%20/polypropylenehoneycomb/.
- [17] Polyvinyl Chloride (PVC). (1998–2019). Retrieved from LENNTECH: https://www.lenntech.com/polyvinyl-chloride-pvc.htm.
- [18] CompositesUK. (2019). Retrieved from compositesuk.co.uk; https://compositesuk.co.uk/composite-materials/processes.
- [19] Vacuum Bagging Techniques. (2010). Gougeon Brothers (Bay City, MI, USA).
Uwagi
Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-3d1e964f-efb6-4533-b08e-6cd24ddadd1e