Impact of corrosion effect on the quality and safety of refractory materials

• Autorzy: Šolc Marek , Kotus Martin , Grambalová Eva , Kliment Juraj , Palfy Pavol

Identyfikatory

DOI

10.2478/czoto-2019-0097

• Konferencja: 7th International Conference System Safety: Human - Technical Facility - Environment, CzOTO 2018 (7 ; 12-14.12.2018 ; Zakopane, Poland)
• Języki publikacji: EN

Abstrakty

EN

The quality of refractory materials plays an important role especially in high temperature processes. In case of violation of qualitative properties of refractory materials, the safety of the use of the technological equipment in which these materials are used is compromised. The requirements on the quality of refractories and their properties are now high, as their operating life should be as long as possible. The aim of the article is to point out the quality of refractory material in contact with corrosive media, to analyze the technological factors that affect the quality and safety of technological equipment. An analysis of the refractory material, as well as the analysis of the melt was performed. Subsequently, an experiment was realized, which was evaluated by macroscopic analysis and chemical analysis. After the experiments, we found that the melt had penetrated the masonry and consequently created corrosion layers in the masonry. These layers have affected the life of the material and reduced the safety of the technological equipment in which they were used.

Słowa kluczowe

EN

refractory material; process; corrosion; requirements

PL

materiał ogniotrwały; jakość; korozja

• Wydawca: De Gruyter
• Czasopismo: System Safety : Human - Technical Facility - Environment
• Rocznik: 2019
• Tom: Vol. 1, nr 1
• Strony: 760--767
• Opis fizyczny: Bibliogr. 15 poz., rys., tab.

Twórcy

autor

Šolc Marek

• Technical University of Košice, Slovak Republic

autor

Kotus Martin

• Slovak University of Agriculture, Slovak Republic

autor

Grambalová Eva

• Technical University of Košice, Slovak Republic

autor

Kliment Juraj

• Technical University of Košice, Slovak Republic

autor

Palfy Pavol

• Technical University of Košice, Slovak Republic

Bibliografia

• [1] Borgez, R.A.A., Lenz de silva, G.F.B., 2017. A statistical and post-mortem study of wear and performance of MgO-C resin bonded refractories used on the slag line ladle of a basic oxygen steelmaking plant. Engineerig Failure Analysis, 78, 161-168. DOI: 10.1016/j.engfailanal.2017.03.020
• [2] Brozova, S., Ingaldi, M., Sperlin, I., 2013. Economical aspects of high-temperature heating utilization for industrial waste treatment. METAL 2013: 22nd International Conference On Metallurgy And Materials, 1735-1739.
• [3] Dulebová, M., Hovanec, M., 2015. Assessment of porosity as one of the indicators of the quality of engineering products. Safety – Quality - Reliability 2015, Košice, TU Košice, 31-37.
• [4] Gregurez, D., Wenzl, C., Kreuzer, D., Spanring, A., Kirschen, M., Zeelie, D., Groenewald, J., 2016. Refractory Corrosion Mechanisms in a Novel High Carbon Ferromanganese Production Furnace. The journal of the Minerals, Metals & Materials Society, 68(12), 3029-3039. DOI: 10.1007/s11837-016-2110-z
• [5] Hankýř, V., Kutzendörfer, J., 2002. Ceramics technology. first ed. Vega, Hradec Králove, Czech Republic.
• [6] Jonšta P., Váňová P., Brožová S., Pustějovská P., Sojka J., Jonšta Z., Ingaldi M. Hydrogen embrittlement of welded joint made of supermartensitic stainless steel in environment containing sulfane. Archives of Metallurgy and Materials, 2016, vo. 61, Nr 2A, s. 709-712
• [7] Leščišin, M., 2006. Quality management. first ed. Ekonóm, Bratislava, Slovakia.
• [8] Nenadál, J., Noskievičová, D., Petříková, R., Plura, J., Tošenovský, J., 2008. Modern Quality Management. first ed. Management press, Brno, Czech Republic.
• [9] Pačaiová, H., Markulik, Š., Turisová, R., Nagyová, A., Namešanská, J., 2015. Quality of production. first ed. TU Košice, Košice, Slovakia.
• [10] Prístavka, M., Bujna, M., 2014. Monitoring the capability of production equipment in organization. Acta Technologica Agriculturae, 17(2), 39-43. DOI: https://doi.org/10.2478/ata-2014-0009
• [11] Šolc, M., Grambalová, E., Šofranko, M., 2014. The quality interaction of molten salts in the systems SiO2 – Al2O3., Advanced Materials Research, 849, 20-25, DOI: 10.4028/www.scientific.net/AMR.849.20
• [12] Staroň, J., Tomašu, F., 1992. Refractory materials – production, properties, use. Media, Banská Bystrica, Slovakia.
• [13] Vert, T., Smith, D. J., 2016. Refractory Materials Selection for Steelmaking. first ed. Wiley, American Ceramics Society, United States of America.
• [14] Záhorská, R., Nozdrovický, L., Mikulášik, Ľ., 2016. Implementation of statistical methods and swot analysis for evaluation of metal waste management in engineering company. Acta Technologica Agriculturae, 19(4), 89-95, DOI: https://doi.org/10.1515/ata-2016-0018
• [15] Zuo, H., Wang, C., Liu, Y., 2017. Dissolution behavior of a novel Al2O3-SiC-SiO2-C composite refractory in blast furnace slag. Ceramics International, 43(9), 7080- 7087. DOI: https://doi.org/10.1016/j.ceramint.2017.02.138

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).