A method to improve repeatability and reproducibility of the results of examination of the rate of heat released by shipbuilding materials

• Autorzy: Sychta K.
• Języki publikacji: EN

Abstrakty

EN

A specialised integrated research rig has been designed and built to validate the method of heat release dynamic error correction based on the FTP Code, part 5, and to control the rig operation and calibration. The basic rig component is a programmed gas burner with an option to select the function and parameters of burner’s operation. The use of the programmed burner increased the level of consistency (reproducibility and correlation) of the results of heat release rate measurements.

Słowa kluczowe

EN

intensity of the secretion of the warmth; dynamic measurements; dynamic error

• Wydawca: Gdańsk University of Technology, Faculty of Ocean Engineering & Ship Technology
• Czasopismo: Polish Maritime Research
• Rocznik: 2014
• Tom: nr 1
• Strony: 70--76
• Opis fizyczny: Bibliogr. 4 poz., rys.

Twórcy

autor

Sychta K.

• Sychta Laboratory General Partnership, Ofiar Stutthofu 50, 72-010 Police, POLAND, phone: [phone]

Bibliografia

• 1. International Code for Fire Test Procedures. Annex 1. Part 5. Surface Flammability Test. International Maritime Organization, London 1998
• 2. K. Sychta: Analiza porównawcza badań intensywności wydzielania ciepła przez materiały okrętowe oraz metoda poprawy dokładności pomiaru. (Comparison and analysis of tests of the rate of heat release results of shipbuilding materials and the method of improvement of reproducibility of results). Doctors Thesis, Faculty of Maritime Technology, Szczecin Technical University, Szczecin 2006
• 3. K. Sychta: The analysis of research results concerning heat release rates of ship materials with regard to dynamic parameters of the research station. Polish Maritime Research, Vol. 15 (2008) pp. 56-59
• 4. ISO 5660-1: 2002, Reaction-to-fire tests . Heat release, smoke production and mass loss rate. Part 1: Heat release rate (cone calorimeter method).