Tribological Studies on AlCrFeCuCoNi High Entropy Alloy Surface Coated on Ti-6Al-4V Using Plasma Transferred Arc Technique

• Autorzy: Prabu G. , Duraiselvam Muthukannan

Identyfikatory

DOI

10.24425/amm.2022.137772

• Języki publikacji: EN

Abstrakty

EN

AlCrFeCuCoNi high entropy particles were alloyed on Ti-6Al-4V surface using Plasma transferred arc (PTA) process. PTA alloyed surfaces were investigated for their phase formation, microhardness improvement and wear behaviour. The various wear mechanism and their corresponding surface roughness were studied. The results revealed that the dual phase of BCC and FCC microstructure along with some intermetallic compounds were grown in the alloyed region through the PTA technique and good metallurgical bonding of the alloyed region with the base material were achieved. The PTA alloyed region exhibited a hardness of 718 HV_0.2 which is 2.2 times higher than the hardness of base material. The PTA alloyed samples showed higher wear resistance due to the solid solution strengthening as the HEA has high entropy of mixing that leads to the reduction of free energy of the alloyed region. It exhibited better interconnection of the coated material and superior metallurgical bonding to the base material. Frictional heat produced during the wear test has promoted the formation of FeO, Cr₂O₃, CuO, NiO and Al₂O₃ oxide film on the PTA alloyed sample. These oxide films act as a barrier between two mating surfaces and improve the tribo performance of the PTA alloyed sample.

Słowa kluczowe

EN

titanium alloy; high entropy alloy; plasma transferred arc; PTA; alloying; wear mechanism

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2022
• Tom: Vol. 67, iss. 2
• Strony: 409--420
• Opis fizyczny: Bibliogr. 45 poz., fot., rys., tab.

Twórcy

autor

Prabu G.

• National Institute of Technology, Department of Production Engineering, Tiruchirappalli, India

autor

Duraiselvam Muthukannan

• National Institute of Technology, Department of Production Engineering, Tiruchirappalli, India

Bibliografia

• [1] M. Krol, T. Tanski, Arch. Metall. Mater. 61(3), 1291-1296 (2016).
• [2] J. Marciniak, J. Szewczenko, W. Kajzer, Arch. Metall. Mater. 60 (3), 2123-2129 (2015).
• [3] Yunlong Zhang, Jun Li, Yunqiang Jiang, Danning Kang, Yongfei Juan, Zhongjie Lu, Mater. Res. Express (2020). DOI: https://doi.org/10.1088/2053-1591/ab6a53 (in press).
• [4] J. Zhang, S. Xue Li, Appl. Surf. Sci. 280, 626-631 (2013).
• [5] D. Er, G.T.P. Azar, M. Kazmanlı Kand Ürgen, Surf. Coat. Technol. 346, 1-8 (2018).
• [6] W. Liu, S. Liu, L. Wang, Coatings 9, 1-23 (2019).
• [7] W. Chen, W. Gao, Electrochim. Acta 55, 6865-6871 (2010).
• [8] Tae Hyun Park, Min Seok Baek, Yongho Sohn, Kee Ahn Lee, Arch. Metall. Mater. 65(3), 1073-1080 (2020).
• [9] Youlu Yuan, Zhuguo Li, Surf. Coat. Technol. 248, 9-22 (2014).
• [10] Youlu Yuan, Zhuguo Li, Appl. Surf. Sci. 423, 13-24 (2017).
• [11] R.P. Garcia, S.C. Canobre, H.L. Costa, Tribol. Int. 143, 106080 (2020).
• [12] L. Baiamonte, M. Tului, C. Bartuli, D. Marini, A. Marino, F. Menchetti, R. Pileggi, G. Pulci, F. Marr, Surf. Coat. Technol. 371, 322-332 (2019).
• [13] H.T. Cao, X.P. Dong, Z. Pan, X.W. Wu, Q.W. Huang, Y.T. Pei, Mater. Des. 100, 223-234 (2016).
• [14] Jien Wei Yeh, Swe Kai Chen, Su-Jien Lin, Jon Yiew Gan, Tsung Shune Chin, Tao Tsung Shun, Chun Huei Tsau, Shou Yi Chang, Adv. Eng. Mater. 6, 299-303 (2004).
• [15] Dechao Zhao, Tomiko Yamaguchi, Wenqin Wang, Mater. Lett. (2019). DOI: https://doi.org/10.1016/j.matdes.2020.108872 (in press).
• [16] Hao Liu, Jian Liu, Peijian Chen, Haifeng Yanga, Opt. Laser Technol. 118, 140-150 (2019).
• [17] J. Huebner, P. Rutkowski, D. Kata, J. Kusinski, Arch. Metall. Mater. 62 (3), 531-538 (2017).
• [18] Kaijin Huang, Yuyue Wang, Xin Lin, Adv. Mater. Res. 989-994, 246-250 (2014).
• [19] Guo Jin, Zhaobing Cai, Yajie Guan, Xiufang Cui, Zhe Liu, Yang Li, Meiling Dong, Dan zhang, Appl. Surf. Sci. 445, 113-122 (2018).
• [20] Benbin Xin, Youjun Yu, Jiansong Zhou, Lingqian Wang, Shufang Ren, Surf. Coat. Tech. 313, 328-336 (2017).
• [21] Jiasi Luo, Songquan Wu, Yanjin Lu, Sai Guo, Yang Yang, Chaoqian Zhao, Junjie Lin, Tingting Huang, Jinxin Lin, J. Mater. Sci. Mater. Med. 29, 37-46 (2018).
• [22] ASTM G99-05, Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus, ASTM International, Ohio (2010).
• [23] Wei Lia, Ping Liua, Peter K. Liawb, Mater. Res. Lett. 6 (4), 199-229 (2018).
• [24] L.J. Santodonato, Y. Zhang, M. Feygenson, C.M. Parish, M.C. Gao, M.K. Miller, R.J.K. Weber, J.C. Neuefeind, Z. Tang, P.K. Liaw, Nat. Commun. (2015). DOI: https://doi.org/10.1038/ncomms 6964 (in press).
• [25] Y. Zhang, T.T. Zuo, Z. Tang, M.C. Gao, K.A. Dahmen, P.K. Liaw, Z.P. Lu, Prog. Mater. Sci. 61, 1-93 (2014).
• [26] C.C. Tung, J.W. Yeh, T.T. Shun, S.K. Chen, Y.S. Huang, H.C. Chen, Mater. Lett. 61, 1-5 (2007).
• [27] L. Arnberg, R. H. Mathiesen, Mater. Forum 28, 47-52 (2004).
• [28] M.L. Melo, E.M.S Rizzo, R.G. Santos, Mat. Sci. Eng. A Struct. 374, 351-361 (2004).
• [29] Jin Ming Zhu, Jie Li Meng, Rare Met. 35 (5), 385-389 (2016).
• [30] Martin Lobel, Thomas Lindner, Thomas Lampke, Materials (2018). DOI: https://doi.org/10.3390/ma 11112225 (in press).
• [31] J.W. Yeh, Ann. Chim. Sci. Mat. 31, 633-648 (2006).
• [32] Mohammed Mohaideen Ferozhkhan, Muthukannan Duraiselvam, Kottaimathan, Ganesh kumar, Rajanbabu Ravibharath, Proc. Technol. 25, 1305-1311 (2016).
• [33] Tiago Jose Anto, Rodrigo Metz Gabriel Paes, Ana Sofia Clímaco Monteiro de Oliveira II, Adriano Scheid, Soldag. Insp. 19, 134-144 (2014).
• [34] K.M. Li, K.J. Songc, J. Guan, F. Yang, J. Liu, Surf. Coat. Technol. (2020). DOI: https://doi.org/10.1016/j.surfcoat.2020.125506 (in press).
• [35] Peiying Shi, Yuan Yu, Nina Xiong, Mingzi Liu, Zhuhui Qiao, Gewen Yi, Qianqian Yao, Gaopan Zhao, Erqing Xie, Qihua Wang, Tribol. Int. 151, 106470 (2020).
• [36] T.M. Yue, H. Xie, X. Lin, H.O. Yang, G.H. Meng, J. Alloys Compd. 587, 588-593 (2014).
• [37] A. Verma, P. Tarate, A.C. Abhyankar, M.R. Mohape, D.S. Gowtam, V.P. Deshmukh, T. Shanmugasundarama, Scr. Mater. 161, 28-31(2019).
• [38] Jin Kun Xiao, Hong Tan, Yu Qing Wu, Juan Chen, Chao Zhang, Surf. Coat. Technol. 385, 125430 (2020).
• [39] Caiyun Shang, Eugen Axinte, Wenjuan Ge, Zitang Zhang, Yan Wang, Surf. Interfaces 9, 36-43 (2017).
• [40] Shreyash Hadke, Rajesh K. Khatirkar, Satish K. Shekhawat, Shreyans Jain, Sanjay G. Sapate, J. Mater. Eng. Perform. 24, 3969-3981 (2015).
• [41] T.M. Yue1, G.H. Meng, H. Xie, X. Lin, H.O. Yang, Int. J. Metall. Mater. Eng. 1, 115 (2015).
• [42] J.B. Cheng, X.B. Liang, Z.H. Wang, B.S. Xu, Plasma Chem. Plasma Process. 33, 979-992 (2013).
• [43] S. Zhang, C.L. Wu, C.H. Zhang, M. Guan, J.Z. Tan, Opt. Laser Technol. 84, 23-31 (2016).
• [44] Yue Zhang, Zheng Chen, Dongdong Cao, Jinyong Zhang, Ping Zhang, J. Mater. Res. Tech. 8, 726-736 (2019).
• [45] Aijun Zhang, Jiesheng Han Bo Su, Pengde Li, Junhu Meng, Mater. Des. 114, 253-263 (2017).

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).