PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Study of bypass ratio increasing possibility for turbofan engine and turbofan with inter turbine burner

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Current trends in the high bypass ratio turbofan engines development are discussed in the beginning of the paper. Based on this, the state of the art in the contemporary turbofan engines is presented and their change in the last decade is briefly summarized. The main scope of the work is the bypass ratio growth analysis. It is discussed for classical turbofan engine scheme. The next step is presentation of reach this goal by application of an additional combustor located between high and low pressure turbines. The numerical model for fast analysis of bypass ratio grows for both engine kinds are presented. Based on it, the numerical simulation of bypass engine increasing is studied. The assumption to carry out this study is a common core engine. For classical turbofan engine bypass ratio grow is compensated by fan pressure ratio reduction. For inter turbine burner turbofan, bypass grown is compensated by additional energy input into the additional combustor. Presented results are plotted and discussed. The main conclusion is drawing that energy input in to the turbofan aero engine should grow when bypass ratio is growing otherwise the energy should be saved by other engine elements (here fan pressure ratio is decreasing). Presented solution of additional energy input in inter turbine burner allow to eliminate this problem. In studied aspect, this solution not allows to improve engine performance. Specific thrust of such engine grows with bypass ratio rise – this is positive, but specific fuel consumption rise too. Classical turbofan reaches lower specific thrust for higher bypass ratio but its specific fuel consumption is lower too. Specific fuel consumption decreasing is one of the goal set for future aero-engines improvements.
Twórcy
  • Department of Aircrafts and Aircraft Engines Rzeszow University of Technology Powstańców Warszawy Av. 8, 35-959 Rzeszow, Poland tel.: +48 17 8651466 fax: +48 17 865 1942
  • MTU Aero Engines Poland Tajęcina 108, 36-002 Tajęcina, Poland tel.: +48 17 771 04 82
Bibliografia
  • [1] Feijia, Y., Arvind G. R., Off-design Performance of an Interstage Turbine Burner Turbofan Engine, Journal of Engineering for Gas Turbines and Power, 2017.
  • [2] Horlock, J. H., Watson, D. T., Jones, T. V., Limitations on Gas Turbine Performance Imposed by Large Turbine Cooling Flow, Journal of Engineering for Gas Turbines and Power, Vol. 123, pp. 487-494, 2001.
  • [3] Jakubowski, R., Analysis of turbofan engine design modification to add inter – turbine combustor, Journal of KONES Powertrain and Transport, Vol. 22, No. 3, pp. 75-82, 2015.
  • [4] Jakubowski, R., Evaluation of performance properties of two combustor turbofan engine, Eksploatacja i Niezawodność – Maintenance and Reliability, 17 (4): pp. 575-581, 2015.
  • [5] Jakubowski, R., Modeling and analysis of jet engine with cooling turbine, Journal of KONES, Vol. 19, No. 2, pp. 235-243, 2012.
  • [6] Jakubowski, R., Modelowanie osiągów silników turbinowych w środowisku MATLAB z wykorzystaniem modeli bloków funkcjonalnych, Technika transportu szynowego, Nr 12, pp. 691-696, 2015.
  • [7] Jakubowski, R., Two-combustor turbofan engine performance analysis, Journal of KONES Powertrain and Transport, European Science Society of Powertrain and Transport Publication, Vol. 21, No. 3, pp. 141-148, 2014.
  • [8] Kurzke, J., Fundamental differences between conventional and geared turbofans, ASME Turbo Expo 2009, Power for Land, Sea, and Air, pp. 145-153, 2009.
  • [9] Lefebvre, A. H., Gas Turbine Combustion, 3th ed., Taylor and Francis Group, LLC, 2010.
  • [10] Liew, K. H., Urip, E., Yang, S. L., Parametric Cycle Analysis of a Turbofan with Interstage Turbine Burner, Journal of Propulsion and Power, Vol. 21, No. 3, June 2005.
  • [11] Liew, K. H., Urip, E., Yang, S. L., Mattingly, J. D., Marek, C. J., Performance Cycle Analysis of a Two-spool Separate-exhaust Turbofan with Interstage Turbine Burner, Journal of Propulsion and Power, Vol. 22, No. 2, pp. 411-416, 2006.
  • [12] Liu, F., Sirignano, W. A., Turbojet and Turbofan Engine Performance Increases Through Turbine Burners, Journal of Propulsion and Power, Vol. 17, No. 3, pp. 695-705, 2001.
  • [13] Pawlak, M., Kuźniar, M., Analysis of the Wind Dependent Duration of the Cruise Phase on Jet Engine Exhaust Emissions, Journal of KONES Powertrain and Transport, Vol. 25, No. 3, 2018.
  • [14] Pawlak, M., Kuźniar, M., Majka, A., Pawluczy, J., Emission of selected exhaust compounds in jet engines of a jet aircraft in cruise phase, Combustion Engines, 173(2), pp. 67-72, 2018.
  • [15] Rao, A.G., Yin, F., van Buijtenen J. P., A Novel Hybrid Engine Concept For Aircraft Propulsion, ISABE-2011-1341, 2011.
  • [16] Sieber, J., European Technology Programs for Eco-Efficient Ducted Turbofans, ISABE-2015-20029, 2015.
  • [17] Sirignano, W. A., Liu, F., Performance Increases for Gas-Turbine Engines Through Combustion Inside the Turbine, Journal of Propulsion and Power, Vol. 15, No. 1, pp 111-118, 1999.
  • [18] Walsh, P. P., Fletcher, P., Gas Turbine Performance, 2nd ed., Blackwell Publishing and ASME, pp. 227 and 282, Fairfield, NJ 2004.
  • [19] Xu, L, Gronsted, T., Design and Analysis of an Inercooled Turbofan Engine, Journal of Propulsion and Power, Vol. 29, No. 2, 2013.
  • [20] Zaho, X., Gronstedt, T., Aero Engine Intercooling Optimization Using a Variable Flow Path, ISABE-2015-20018, 2015.
Uwagi
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-3c032e00-5f02-4c88-a1ad-adeb0f13629f
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.