Design and research of a bredigite bone repair scaffold

• Autorzy: Liang Tingxin , Wang Fei , Li Jing , Shi Yanbin , Liu Pengbo , Lu Shuaishuai

Identyfikatory

DOI

10.37190/ABB-02525-2024-02

• Języki publikacji: EN

Abstrakty

EN

The fluid shear stress (FSS) generated by fluid flow after scaffold implantation is an important factor affecting the osteogenic ability of scaffolds and the proliferation and differentiation of osteoblasts are also affected by FSS. When the bone injury occurs, the blood flow at the defect changes from laminar flow to turbulent flow. Consequently, it is essential to employ a numerical simulation method that accurately reflects the actual conditions to study and analyze the surface FSS experienced by scaffolds and cells, thereby enhancing the osteogenic properties of the scaffolds. Methods: In this research, nine scaffolds with different structures and pore sizes were designed. The two-way fluid–structure interaction (FSI) method was used to evaluate scaffolds’ internal flow field velocity and the surface FSS of scaffolds and cells. Results: The results show that the velocity distribution of different scaffolds is basically the same. FSS on the scaffold surface and FSS on cell surface decreased with the increase of scaffold pore size. FSS accepted by cells was much larger than that received by scaffolds, and FSS was distributed in a stepped pattern on the cell surface. Conclusions: Based on the FSS of the scaffold and cell surface, the triangle-600 and triangle-800 scaffolds have better osteogenic differentiation ability. This provides a more practical strategy for tissue engineering to design better scaffolds.

Słowa kluczowe

EN

bone repair scaffold; two-way FSI; turbulence model; FSS

• Wydawca: Oficyna Wydawnicza Politechniki Wrocławskiej
• Czasopismo: Acta of Bioengineering and Biomechanics
• Rocznik: 2025
• Tom: Vol. 27, no. 1
• Strony: 3--12
• Opis fizyczny: Bibliogr. 54 poz., rys., tab., wykr.

Twórcy

autor

Liang Tingxin

• School of Mechanical Engineering, Qilu University of Technology (Shandong Academy of Sciences), China; Shandong Institute of Mechanical Design and Research, China

autor

Wang Fei

• School of Mechanical Engineering, Qilu University of Technology (Shandong Academy of Sciences), China; Shandong Institute of Mechanical Design and Research, China

autor

Li Jing

• School of Mechanical Engineering, Qilu University of Technology (Shandong Academy of Sciences), China; Shandong Institute of Mechanical Design and Research, China

autor

Shi Yanbin

• School of Mechanical Engineering, Qilu University of Technology (Shandong Academy of Sciences), China; Shandong Institute of Mechanical Design and Research, China

autor

Liu Pengbo

• School of Mechanical Engineering, Qilu University of Technology (Shandong Academy of Sciences), China; Shandong Institute of Mechanical Design and Research, China

autor

Lu Shuaishuai

• School of Mechanical Engineering, Qilu University of Technology (Shandong Academy of Sciences), China; Shandong Institute of Mechanical Design and Research, China

Bibliografia

• [1] ALI D., SEN S., Finite element analysis of mechanical behavior, permeability and fluid induced wall shear stress of high porosity scaffolds with gyroid and lattice-based architectures, Journal of the Mechanical Behavior of Biomedical Materials, 2017, 75, 262–270, DOI: 10.1016/j.jmbbm.2017.07.035.
• [2] BOHNER M., MIRON R.J., A proposed mechanism for material- induced heterotopic ossification, Materials Today, 2019, 22, 132–141, DOI: 10.1016/j.mattod.2018.10.036.
• [3] BOSE S., FIELDING G., TARAFDER S., Understanding of dopant-induced osteogenesis and angiogenesis in calcium phosphate ceramics, Trends in Biotechnology, 2013, 31 (10), 594–605, DOI: 10.1016/j.tibtech.2013.06.005.
• [4] D’ADAMO A., Experimental measurements and CFD modelling of hydroxyapatite scaffolds in perfusion bioreactors for bone regeneration, Regenerative Biomaterials, 2023, 10, rbad002, DOI: 10.1093/rb/rbad002.
• [5] FU M., WANG F., LIN G., Design and research of bone repair scaffold based on two-way fluid-structure interaction, Computer Methods and Programs in Biomedicine, 2021, 204, 106055, DOI: 10.1016/j.cmpb.2021.106055.
• [6] GAO Y., SHI Y., FU M., Simulation study of the effects of interstitial fluid pressure and blood flow velocity on transvascular transport of nanoparticles in tumor microenvironment, Computer Methods and Programs in Biomedicine, 2020, 193, 105493, DOI: 10.1016/j.cmpb.2020.105493.
• [7] GEIGER F., BERTRAM H., BERGER I., Vascular endothelial growth factor gene-activated matrix (VEGF165-GAM) enhances osteogenesis and angiogenesis in large segmental bone defects, Journal of Bone and Mineral Research, 2005, 20 (11), 2028–2035, DOI: 10.1359/JBMR.050701.
• [8] GUVENDIREN M., MOLDE J., SOARES R.M.D., Designing biomaterials for 3D printing, ACS Biomaterials Science and Engineering, 2016, 2 (10), 1679–1693, DOI: 10.1021/acsbiomaterials.6b00121.
• [9] JIA M., Deletion of BACH1 attenuates atherosclerosis by reducing endothelial inflammation, Circulation Research, 2022, 130 (7), 1038–1055, DOI: 10.1161/CIRCRESAHA. 121.319540.
• [10] JUNGREUTHMAYER C., JAASMA M.J., AL-MUNAJJED A.A., Deformation simulation of cells seeded on a collagen-GAG scaffold in a flow perfusion bioreactor using a sequential 3D CFD-elastostatics model, Medical Engineering & Physics, 2009, 31 (4), 420–427, DOI: 10.1016/j.medengphy.2008.11.003.
• [11] KAPUR S., BAYLINK D.J., LAU K.H.W., Fluid flow shear stress stimulates human osteoblast proliferation and differentiation through multiple interacting and competing signal transduction pathways, Bone, 2003, 32 (3), 241–251, DOI: 10.1016/S8756-3282(02)00979-1.
• [12] KIM M.S., LEE M.H., KWON B.J., Enhancement of human mesenchymal stem cell infiltration into the electrospun poly (lactic-co-glycolic acid) scaffold by fluid shear stress, Biochemical and Biophysical Research Communications, 2015, 463 (1–2), 137–142, DOI: 10.1016/j.bbrc.2015.05.048.
• [13] KOONS G.L., DIBA M., MIKOS A.G., Materials design for bone-tissue engineering, Nature Reviews Materials, 2020, 5 (8), 584–603, DOI: 10.1038/s41578-020-0204-2.
• [14] KOPP A., DERRA T., MÜTHER M., Influence of design and postprocessing parameters on the degradation behavior and mechanical properties of additively manufactured magnesium scaffolds, Acta Biomaterialia, 2019, 98, 23–35, DOI: 10.1016/j.actbio.2019.04.012.
• [15] LAI Y., CAO H., WANG X., Porous composite scaffold incorporating osteogenic phytomolecule icariin for promoting skeletal regeneration in challenging osteonecrotic bone in rabbits, Biomaterials, 2018, 153, 1–13, DOI: 10.1016/j.biomaterials.2017.10.025.
• [16] LAI Y., LI Y., CAO H., Osteogenic magnesium incorporated into PLGA/TCP porous scaffold by 3D printing for repairing challenging bone defect, Biomaterials, 2019, 197, 207–219, DOI: 10.1016/j.biomaterials.2019.01.013.
• [17] LI H., WANG H., PAN J., Nanoscaled Bionic Periosteum Orchestrating the Osteogenic Microenvironment for Sequential Bone Regeneration, ACS Appl. Mater. Interfaces, 2020, 12 (33), 36823–36836, DOI: 10.1021/acsami.0c06906.
• [18] LI Y., PAN Q., XU J., Overview of methods for enhancing one regeneration in distraction osteogenesis: Potential roles of biometals, Journal of Orthopaedic Translation, 2021, 27, 110–118, DOI: 10.1016/j.jot.2020.11.008.
• [19] LIU L., WANG S., LIU J., Architectural design of Ti6Al4V scaffold controls the osteogenic volume and application area of the scaffold, Journal of Materials Research and Technology, 2020, 9 (6), 15849–15861, DOI: 10.1016/j.jmrt.2020.11.061.
• [20] MA C., DU T., NIU X., Biomechanics and mechanobiology of the bone matrix, Bone Research, 2022, 10 (1), 59, DOI: 10.1038/s41413-022-00223-y.
• [21] MENG J., XIAO B., ZHANG Y., Super-paramagnetic responsive nanofibrous scaffolds under static magnetic field enhance osteogenesis for bone repair in vivo, Scientific Reports, 2013, 3 (1), 2655, DOI: 10.1038/srep02655.
• [22] MERCADO-PAGÁN Á.E., STAHL A.M., SHANJANI Y., Vascularization in bone tissue engineering constructs, Annals of Biomedical Engineering, 2015, 43 (3), 718–729, DOI: 10.1007/s10439-015-1253-3.
• [23] MILAN J.L., PLANELL J.A., LACROIX D., Computational modelling of the mechanical environment of osteogenesis within a polylactic acid–calcium phosphate glass scaffold, Biomaterials, 2009, 30 (25), 4219–4226, DOI: 10.1016/j.biomaterials. 2009.04.026.
• [24] NABIYOUNI M., BRÜCKNER T., ZHOU H., Magnesium-based bioceramics in orthopedic applications, Acta Biomaterialia, 2018, 66, 23–43, DOI: 10.1016/j.actbio.2017.11.033.
• [25] NAMBIAR J., JANA S., NANDI S.K., Strategies for Enhancing Vascularization of Biomaterial_Based Scaffold in Bone Regeneration, The Chemical Record, 2022, 22 (6), e202200008, DOI: 10.1002/tcr.202200008.
• [26] OLIVARES A.L., MARSAL È., PLANELL J.A., Finite element study of scaffold architecture design and culture conditions for tissue engineering, Biomaterials, 2009, 30 (30), 6142–6149, DOI: 10.1016/j.biomaterials.2009.07.041.
• [27] OSSENDORF C., KAPS C., KREUZ P.C., Treatment of posttraumatic and focal osteoarthritic cartilage defects of the knee with autologous polymer-based three-dimensional chondrocyte grafts: 2-year clinical results, Arthritis Research and Therapy, 2007, 9, 1–11, DOI: 10.1186/ar2180.
• [28] OUYANG P., DONG H., HE X., Hydromechanical mechanism behind the effect of pore size of porous titanium scaffolds on osteoblast response and bone ingrowth, Materials and Design, 2019, 183, 108151, DOI: 10.1016/j. matdes.2019.108151.
• [29] SALERNO E., ORLANDI G., ONGARO C., Liquid flow in scaffold derived from natural source: experimental observations and biological outcome, Regenerative Biomaterials, 2022, 9, rbac034, DOI: 10.1093/rb/rbac034.
• [30] SALGADO A.J., COUTINHO O.P., REIS R.L., Bone tissue engineering: state of the art and future trends, Macromolecular Bioscience, 2004, 4 (8), 743–765, DOI: 10.1002/mabi.200400026.
• [31] SANDINO C., LACROIX D., A dynamical study of the mechanical stimuli and tissue differentiation within a CaP scaffold based on micro-CT finite element models, Biomechanics and Modeling in Mechanobiology, 2011, 10, 565–576, DOI: 10.1007/s10237-010-0256-0.
• [32] SCHATKOSKI V.M., LARISSA DO AMARAL MONTANHEIRO T., CANUTO DE MENEZES B.R., Current advances concerning the most cited metal ions doped bioceramics and silicate-based bioactive glasses for bone tissue engineering, Ceramics International, 2021, 47 (3), 2999–3012, DOI: 10.1016/j.ceramint.2020.09.213.
• [33] SHUAI C., YANG W., HE C., A magnetic micro-environment in scaffolds for stimulating bone regeneration, Materials and Design, 2020, 185, 108275, DOI: 10.1016/j.matdes. 2019.108275.
• [34] SINHA R., CAMARA-TORRES M., SCOPECE P., A hybrid additive manufacturing platform to create bulk and surface composition gradients on scaffolds for tissue regeneration, Nat. Commun., 2021, 12 (1), 500, DOI: 10.1038/s41467-020-20865-y.
• [35] SOHRABI S., ZHENG J., FINOL E.A., Numerical simulation of particle transport and deposition in the pulmonary vasculature, Journal of Biomechanical Engineering, 2014, 136 (12), 121010, DOI: 10.1115/1.4028800.
• [36] STOPS A.J.F., HERATY K.B., BROWNE M., A prediction of cell differentiation and proliferation within a collagen–glycosaminoglycan scaffold subjected to mechanical strain and perfusive fluid flow[J], Journal of Biomechanics, 2010, 43 (4), 618–626, DOI: 10.1016/j.jbiomech.2009.10.037.
• [37] STOPS A.J.F., HERATY K.B., BROWNE M., A prediction of cell differentiation and proliferation within a collagen–glycosaminoglycan scaffold subjected to mechanical strain and perfusive fluid flow, Journal of Biomechanics, 2010, 43 (4), 618–626, DOI: 10.1016/j.jbiomech.2009.10.037.
• [38] SUGAWARA Y., ANDO R., KAMIOKA H., The alteration of a mechanical property of bone cells during the process of changing from osteoblasts to osteocytes, Bone, 2008, 43 (1), 19–24, DOI: 10.1016/j.bone. 2008.02.020. [39] TOMLINSON R.E., SILVA M.J., Skeletal blood flow in bone repair and maintenance, Bone Research, 2013, 1 (1), 311–322, DOI:10.4248/BR201304002.
• [40] TRUSCELLO S., KERCKHOFS G., VAN BAEL S., Prediction of permeability of regular scaffolds for skeletal tissue engineering: a combined computational and experimental study, Acta Biomaterialia, 2012, 8 (4), 1648–1658, DOI: 10.1016/j.actbio.2011.12.021.
• [41] VAUGHAN T.J., HAUGH M.G., MCNAMARA L.M., A fluid–structure interaction model to characterize bone cell stimulation in parallel-plate flow chamber systems, Journal of The Royal Society Interface, 2013, 10 (81), 20120900, DOI:10.1098/rsif.2012.0900.
• [42] VERBRUGGEN S.W., VAUGHAN T.J., MCNAMARA L.M., Fluid flow in the osteocyte mechanical environment: a fluid–structure interaction approach, Biomechanics and Modelingin Mechanobiology, 2014, 13 (1), 85–97, DOI: 10.1007/s10237-013-0487-y.
• [43] WALTERS G., POUNTOS I., GIANNOUDIS P.V., The cytokines and micro-environment of fracture haematoma: Current evidence, Journal of Tissue Engineering and Regenerative Medicine, 2018, 12 (3), e1662–e1677, DOI: 10.1002/term.2593.
• [44] WANG S.J., JIANG D., ZHANG Z.Z., Biomimetic nano silica–collagen scaffolds for in situ bone regeneration: toward a cell-free, one-step surgery, Advanced Materials, 2019, 31 (49), 1904341, DOI: 10.1002/adma.201904341.
• [45] WEINBAUM S., COWIN S.C., ZENG Y., A model for the excitation of osteocytes by mechanical loading-induced bone fluid shear stresses, Journal of Biomechanics, 1994, 27 (3), 339–360, DOI: 10.1016/0021-9290(94)90010-8.
• [46] WITTKOWSKE C., REILLY G.C., LACROIX D., In vitro bone cell models: impact of fluid shear stress on bone formation, Frontiers in Bioengineering and Biotechnology, 2016, 4, 87, DOI: 10.3389/fbioe.2016.00087.
• [47] WU C., RAMASWAMY Y., ZHU Y., The effect of mesoporous bioactive glass on the physiochemical, biological and drug-release properties of poly (DL-lactide-co-glycolide) films, Biomaterials, 2009, 30 (12), 2199–2208, DOI: 10.1016/ j.biomaterials.2009.01.029.
• [48] WU Y., JIANG W., WEN X., A novel calcium phosphate ceramic– magnetic nanoparticle composite as a potential bone substitute, Biomedical Materials, 2010, 5 (1), 015001, DOI: 10.1088/1748-6041/5/1/015001.
• [49] YOON J.J., KIM J.H., PARK T.G., Dexamethasone-releasing biodegradable polymer scaffolds fabricated by a gas-foaming/ salt-leaching method, Biomaterials, 2003, 24 (13), 2323–2329, DOI: 10.1016/S0142-9612(03)00024-3.
• [50] ZAMANI Y., AMOABEDINY G., MOHAMMADI J., 3D-printed poly (e-caprolactone) scaffold with gradient mechanical properties according to force distribution in the mandible for mandibular bone tissue engineering, Journal of the Mechanical Behavior of Biomedical Materials, 2020, 104, 103638, DOI: 10.1016/j.jmbbm.2020.103638.
• [51] ZHAO D.W., ZUO K.Q., WANG K., Interleukin-4 assisted calcium-strontium-zinc-phosphate coating induces controllable macrophage polarization and promotes osseointegration on titanium implant, Materials Science and Engineering: C, 2021, 118: 111512, DOI: 10.1016/j. msec.2020.111512.
• [52] ZHAO F., VAUGHAN T.J., MCNAMARA L.M., Multiscale fluid–structure interaction modelling to determine the mechanical stimulation of bone cells in a tissue engineered scaffold, Biomechanics and Modeling in Mechanobiology, 2015, 14, 231–243, DOI: 10.1007/s10237-014-0599-z.
• [53] ZHAO F., VAUGHAN T.J., MCNAMARA L.M., Quantification of fluid shear stress in bone tissue engineering scaffolds with spherical and cubical pore architectures, Biomechanics and Modeling in Mechanobiology, 2016, 15, 561–577, DOI: 10.1007/s10237-015-0710-0.
• [54] ZHU L., LUO D., LIU Y., Effect of the nano/microscale structure of biomaterial scaffolds on bone regeneration, International Journal of Oral Science, 2020, 12 (1), 6, DOI: 10.1038/s41368-020-0073-y.