New Gasostatic Borehole Bearings - Construction and Research

• Autorzy: Oryński F. , Pawłowski W. , Kawczyński S.
• Języki publikacji: EN

Abstrakty

EN

In the article the origin of creation, construction as well as the research of the novel gasostatic borehole bearings are presented. In the rst part of the paper the information on the construction of the bearing is outlined whereas in the second part the methodology of the experimental and numerical research as well as obtained results are described. The paper is summarized with the conclusions of the research and suggestions due to commercial application of the bearings.

Słowa kluczowe

EN

aerostatic bearings; bearing systems; gas compressor bearing

PL

łożysko aerostatyczne; system nośny

• Wydawca: Wydawnictwo Politechniki Łódzkiej
• Czasopismo: Mechanics and Mechanical Engineering
• Rocznik: 2016
• Tom: Vol. 20, nr 1
• Strony: 33--41
• Opis fizyczny: Bibliogr. 14 poz.

Twórcy

autor

Oryński F.

• Higher Vocational State School in Włocławek 3. Maja 17, 87-800 Włocławek, Poland

autor

Pawłowski W.

• Institute of Machine Tools and Production Engineering Lodz University of Technology Stefanowskiego 1/15, 90-924 Łódź, Poland

autor

Kawczyński S.

• Faculty of Technical Sciences Cuiavian University in Włocławek Freedom Square 1, 87-800 Włocławek, Poland

Bibliografia

• [1] Demierre, J., Rubino, A. and Jurg Schiffmann, J.: Modeling and Experimental Investigation of an Oil-Free Microcompressor-Turbine Unit for an Organic Rankine Cycle Driven Heat Pump, Journal of Engineering for Gas Turbines and Power, Paper No: GTP-14-1364; doi: 10.1115/1.4028389.
• [2] Lewandowski, D.: Aerostatic bearing of high-speed spindle systems (in Polish), Scientic Papers of Technical University of Lodz, No 753, Łódź, Poland, 1996.
• [3] Oryński, F.: Design and calculation of hydraulic friction vibration damper with the contactless piston and automatic quick-acting choke (in Polish), Hydraulics and Pneumatics, No 3, 14 - 17.
• [4] Oryński, F. and Kawczyński, S.: The choice of bearings for gas compressors (in Polish), Hydraulics and Pneumatics, No 6, 14 - 19.
• [5] Oryński, F. and Kawczyński, S.: Gasostatic radial - axial borehole bearing [with undercuts on the shaft and bearings foreheads]. Zgoszenie patentowe P398005, Polish patent application, 06.02.2012.
• [6] Oryński, F. and Kawczyński, S.: Gasostatic radial borehole bearing [with un-dercuts on the shaft]. The patent application P-398003, Polish patent application, 06.02.2012.
• [7] Oryński, F. and Kawczyński, S.: Gasostatic radial borehole bearing [with under-cuts on bearing foreheads]. The patent application P398004, Polish patent application, 06.02.2012.
• [8] Oryński, F. and Kawczyński, S.: Gasostatic radial - axial borehole bearing [with undercuts on the shaft and discs]. The patent application P398006, Polish patent application, 06.02.2012
• [9] Oryński, F. and Kawczyński, S.: Gasostatic radial - axial borehole bearing [with undercuts on bushing and foreheads]. The patent application P398007, Polish patent application, 06.02.2012.
• [10] Oryński, F. and Kawczyński, S.: Gasostatic radial - axial borehole bearing [with undercuts on bushing and discs]. The patent application P398008, Polish patent application, 06.02.2012.
• [11] Oryński, F. and Pawłowski, W.: The mathematical description of dynamics of the cylindrical grinder, International Journal of Machine Tools and Manufacture, Nr 42/7, 773-780.
• [12] Oryński, F. and Pawłowski, W.: Simulation and Experimental Research of the Grinder`s Wheelhead Dynamics, Journal of Vibration and Control, vol. 10, No.6, 915-930.
• [13] Pawłowski, W.: Dynamic Model of Oscillation-Assisted Cylindrical Plunge Grinding With Chatter, Journal of Manufacturing Science and Engineering, 135(5):051010-051010-6, doi:10.1115/1.4024819.
• [14] Wade, J. L., Lubell, D. R. andWeissert, D.: Successful Oil-Free Version of a Gas Compressor Through Integrated Design of Foil Bearings, ASME Proceedings, Vol. 5: Structures and Dynamics, No. GT2008-50349, doi:10.1115/GT2008-50349, 969-973.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.