Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Effect of Fabric Layers on Thermal Comfort Properties of Multilayered Thermal Protective Fabrics

Wybrane pełne teksty z tego czasopisma
Warianty tytułu
Języki publikacji
Thermal protective clothings are produced from multilayered textile materials. Fabric layers need to allow enough evaporation of perspiration, ventilation, and also thermal protection from fire. This study aimed to evaluate the effects of different fabric layers and their different combinations on the thermal properties of multilayered fabric samples. Three-layered fabric combinations were created using two types of outer shell fabrics, four types of moisture barrier fabrics with membrane, and two types of thermal barrier fabrics. Sixteen different fabric combinations that simulate three-layered thermal protective clothing were studied. As a result of the study, it was found that thermal and moisture comfort properties were significantly affected by different fabric layers.
Opis fizyczny
Bibliogr. 33 poz.
  • Istanbul Technical University, Textile Technologies and Design Faculty, Textile Engineering Department, Istanbul, Turkey
  • [1] Li, Y. (2001). The science of clothing comfort. Textile Progress. 31(1–2), 1-35.
  • [2] Li, Y. (2005). Perceptions of temperature, moisture and comfort in clothing during environmental transients. Journal Ergonomics, 48(3), 234-248.
  • [3] Mah, T., Song, G. W. (2010). Investigation of the contribution of garment design to thermal protection. Part 2:Instrumented female mannequin flash-fire evaluation system. Textile Research Journal, 80, 1473-1487.
  • [4] Rossi, R. M., Gross, R., May, H. (2004). Water vapor transfer and condensation effects in multilayer textile combinations. Textile Research Journal, 74(1), 1-6.
  • [5] Schneider, A. M., Hoschke, B. N., Goldsmith, H. J. (1992). Heat transfer through moist fabrics. Textile Research Journal, 62(2), 61-66.
  • [6] Zhu, L., Wang, X., Blanchonette, I., Naebe, M. (2017). Thermal comfort properties of bifacial fabrics. Textile Research Journal, 87(19), 2307-2313.
  • [7] Sun, C., Fan, J. (2017). Comparison of clothing thermal comfort properties measured on female and male sweating manikins. Textile Research Journal, 87(18), 2214-2223.
  • [8] Raimundoa, A. M., Figueiredo, A. R. (2009). Personal protective clothing and safety of firefighters near a high intensity fire front. Fire Safety Journal, 44(4), 514-521.
  • [9] Teunissena, L. P. J., Wang, L. C., Chou, S. N. (2014).Evaluation of two cooling systems under a firefighter coverall. Applied Ergonomics, 45(6), 1433-1438.
  • [10] Levels, K., de Koning, J. J., Mol, E., Foster, C., Daanen, H. A. (2014). The effect of pre-warming on performance during simulated firefighting exercise. Applied Ergonomics, 45(6), 1504-1509.
  • [11] Son, S. Y., Bakri, I., Muraki, S., Tochihara, Y, (2014). Comparison of firefighters and non-firefighters and the test methods used regarding the effects of personal protective equipment on individual mobility. Applied Ergonomics, 45(4), 1019-1027.
  • [12] Kong, P. W., Suyama, J., Hostler, D. (2013). A review of risk factors of accidental slips, trips, and falls among firefighters. Safety Science, 60, 203-209.
  • [13] Chung, G. -S., Lee, D. H. (2005). A study on comfort of protective clothing for firefighters. Elsevier Ergonomics Book Series, 3, 375-378.
  • [14] Jiang, Y. Y., Yanai, E., Nishimura, K., Zhang, H., Abe, N., et al. (2010). An integrated numerical simulator for thermal performance assessments of firefighters’ protective clothing. Fire Safety Journal, 45(5), 314-326.
  • [15] Hoschke, B. N. (1981). Standard and specifications for firefighters’ clothing. Fire Safety Journal, 4(2), 125-137.
  • [16] Kim, J. H., Williams, W. J., Coca, A., Yokota, M. (2013). Application of thermoregulatory modeling to predict core and skin temperatures in firefighters. International Journal of Industrial Ergonomics, 43(1), 115-120.
  • [17] Li, J., Barker, R. L., Deaton, A. S. (2007). Evaluating the effects of material component and design feature on heat transfer in firefighter turnout clothing by a sweating manikin. Textile Research Journal, 77(2), 59-66.
  • [18] Zhiying, C, Yanmin, W, Weiyuan, Z. (2010). Thermal protective performance and moisture transmission of firefighter protective Clothing based on orthogonal design. Journal of Industrial Textiles, 39(4), 347-356.
  • [19] Keiser, C., Becker, C. Rossi, R. M. (2008). Moisture transport and absorption in multilayer protective clothing fabrics. Textile Research Journal, 78(7), 604-613.
  • [20] Fu, M., Weng, W., Han, X. (2013). Effects of moisture transfer and condensation in protective clothing based on thermal manikin experiment in fire environment. Procedia Engineering, 62, 760-768.
  • [21] Wang, Y., Zhang, Z., Li, J., Zhua, G. (2013). Effects of inner and outer clothing combinations on firefighter ensembles’ thermal and moisture related comfort levels. The Journal of The Textile Institute, 104(5), 530-540.
  • [22] Lawson, J. R. (2005). Estimates of thermal conductivity for unconditioned and conditioned materials used in fire fighters’ protective clothing. National Institute of Standards and Technology, NISTIR, 7282, 71.
  • [23] Eryürük, S. H. (2016). Analysis of thermal properties of firefighter’s protective clothings. Tekstil ve Konfeksiyon, 26(3), 270-279.
  • [24] Kutlu, B., Cireli, A. (2005). Thermal analysis and performance properties of thermal protective clothing. Fibers & Textiles in Eastern Europe, 13(3), 58-62.
  • [25] Cui, Z., Zhang, W. (2009). Study of the effect of material assembly on the moisture and thermal protective performance of firefighter clothing. Fibres & Textiles in Eastern Europe, 17(6) (77), 80-83.
  • [26] Hes, L., De Araujo, M., Djulay, V. (1996). Effect of mutual bonding of textile layers on thermal insulation and thermal contact properties of fabric assemblies. Textile Research Journal, 66, 245-250.
  • [27] Matusiak, M., (2006). Investigation of the thermal insulation properties of multilayer textiles. Fibres & Textiles in Eastern Europe, 14(5) (59), 98-102.
  • [28] ISO 11092:2014. (2014). Textiles – physiological effects – measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test).
  • [29] Ramachandran, T., Manonmani, G., Vigneswaran, C. (2010). Thermal behavior of ring and compact-spun yarn single jersey, rib and interlock knitted fabrics. Indian Journal of Fibre & Textile Research, 35, 250-257.
  • [30] Sabir, E. C., Kadem, F. D. (2016). Comfort and performance properties of raised and laminated denim fabrics. Fibres & Textiles in Eastern Europe, 24, 5(119), 88-94.
  • [31] Ukponmwan, J. O. (1993). The thermal insulation properties of the fabrics. Textile Progress, 24(4), 1-54
  • [32] Havenith, G. (2002). The interaction of clothing and thermoregulation. Exogenous Dermatology, 1(5), 221-230.
  • [33] Shekar, I., Kasturiya, R. N., Raj, H., Nigam, S. (2001). Influence of wool-synthetic fibre blends on thermal insulation. Indian Journal of Fibre and Textile Research, 26, 287-295.
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).
Typ dokumentu
Identyfikator YADDA
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.