Austenitic Stability and Strain-Induced Martensitic Transformation Behavior of Nanocrystalline FeNiCrMoC HSLA Steels

• Autorzy: Park Jungbin , Jeon Junhyub , Seo Namhyuk , Kim Gwanghun , Son Seung Bae , Jung Jae-Gil , Lee Seok-Jae

Identyfikatory

DOI

10.24425/amm.2023.141475

• Języki publikacji: EN

Abstrakty

EN

The austenitic stability and strain-induced martensitic transformation behavior of a nanocrystalline FeNiCrMoC alloy were investigated. The alloy was fabricated by high-energy ball milling and spark plasma sintering. The phase fraction and grain size were measured using X-ray diffraction. The grain sizes of the milled powder and the sintered alloy were confirmed to be on the order of several nanometers. The variation in the austenite fraction according to compressive deformation was measured, and the austenite stability and strain-induced martensitic transformation behavior were calculated. The hardness was measured to evaluate the mechanical properties according to compression deformation, which confirmed that the hardness increased to 64.03 HRC when compressed up to 30%.

Słowa kluczowe

EN

nanocrystalline; austenite stability; strain induced martensite; transformation induced plasticity

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2023
• Tom: Vol. 68, iss. 1
• Strony: 77--80
• Opis fizyczny: Bibliogr. 38 poz., rys., tab., wykr.

Twórcy

autor

Park Jungbin

• Jeonbuk National University, Research Center for Advanced Materials Development, Division of Advanced Materials Engineering, Jeonju 54896, Republic of Korea

• https://orcid.org/0000-0001-8828-3567

autor

Jeon Junhyub

• Jeonbuk National University, Research Center for Advanced Materials Development, Division of Advanced Materials Engineering, Jeonju 54896, Republic of Korea

• https://orcid.org/0000-0001-8214-1576

autor

Seo Namhyuk

• Jeonbuk National University, Research Center for Advanced Materials Development, Division of Advanced Materials Engineering, Jeonju 54896, Republic of Korea

• https://orcid.org/0000-0002-1015-1430

autor

Kim Gwanghun

• Jeonbuk National University, Research Center for Advanced Materials Development, Division of Advanced Materials Engineering, Jeonju 54896, Republic of Korea

• https://orcid.org/0000-0002-7112-4372

autor

Son Seung Bae

• Jeonbuk National University, Research Center for Advanced Materials Development, Division of Advanced Materials Engineering, Jeonju 54896, Republic of Korea

• https://orcid.org/0000-0003-0712-026X

autor

Jung Jae-Gil

• Jeonbuk National University, Research Center for Advanced Materials Development, Division of Advanced Materials Engineering, Jeonju 54896, Republic of Korea

• https://orcid.org/0000-0002-4439-4086

autor

Lee Seok-Jae

• Jeonbuk National University, Research Center for Advanced Materials Development, Division of Advanced Materials Engineering, Jeonju 54896, Republic of Korea

• https://orcid.org/0000-0003-2463-8706

Bibliografia

• [1] R. Karimbaev, Y.S. Pyun, E. Maleki, O. Unal, A. Amanov, Mater. Sci. Eng. A 791, 139752 (2020).
• [2] W.S. Lee, T.T. Su, J. Mater. Process. Technol. 87, 198 (1999).
• [3] Y. Tomita, Metall. Trans. A 22A, 1093 (1991).
• [4] G.Y. Lai, W.E. Wood, R.A. Clark, V.F. Zackay, E.R. Parker, Metall. Mater. Trans. B 5, 1663 (1974).
• [5] R.L. McDaniels, S.A. White, K. Liaw, L. Chen, M.H. McCay, P.K. Liaw, Metall. Trans. A 485, 500 (2008).
• [6] J.S. Benjamin, T.E. Volin, Met. Trans. 5 1929 (1974).
• [7] H.J. Fecht, E. Hellstern, Z. Fu, W.L. Johnson, Metall. Trans. A21, 2333 (1990).
• [8] C. Keller, K. Tabalaiev, G. Marnier, J. Noudem, X. Sauvage, E. Hug, Mater. Sci. Eng. A 665, 125 (2016).
• [9] V. Mamedov, Powder Metall. 45, 322 (2002).
• [10] Z. Shen, M. Johnsson, Z. Zhao, M. Nygren, J. Am. Ceram. Soc. 85, 1921 (2002).
• [11] E.O. Hall, Proc. Phys. Soc. B 64, 747 (1951).
• [12] N.J. Petch, J. Iron Steel Inst. Jpn. 174, 25 (1953).
• [13] G. Kim, J. Jeon, N. Seo, S. Choi, M.S. Oh, S.B. Son, S.J. Lee, Arch. Metall. Mater. 66, 759 (2021).
• [14] J. Jeon, S. Choi, N. Seo, Y.H. Moon, I.J. Shon, S.J. Lee, Arch. Metall. Mater. 65, 1249 (2020).
• [15] S.G. Choi, J.H. Jeon, N. Seo, Y.H. Moon, I.J. Shon, S.J. Lee, Arch. Metall. Mater. 65, 1001 (2020).
• [16] M.J. Chae, A. Sharma, M.C. Oh, B. Ahn, Met. Mater. Int. 27, 629 (2021).
• [17] N. Seo, J. Jeon, G. Kim, J. Park, S.B. Son, S.J. Lee, J. Korean Powder Metall. Inst. 27, 373 (2020).
• [18] G. Kim, J. Jeon, N. Seo, J. Park, S.B. Son, S.J. Lee, J. Korean Powder Metall. Inst. 28, 246 (2021).
• [19] S.J. Oh, D. Park, K. Kim, I.J. Shon, S.J. Lee, Mater. Sci. Eng. A 725, 382 (2018).
• [20] M.R. Berrahmoune, S. Berveiller, K. Inal, A. Moulin, E. Patoor, Mater. Sci. Eng. A 378, 304 (2004).
• [21] S. Lee, B.C. De Cooman, Metall. Mater. Trans. A 44A, 5018 (2013).
• [22] B.C. De Cooman, Curr. Opin. Solid State Mater. Sci. 8, 285 (2004).
• [23] N. Saeidi, M. Jafari, J.G. Kim, F. Ashrafizadeh, H.S. Kim, Met. Mater. Int. 26, 168 (2020).
• [24] G.K. Williamson, W.H. Hall, Acta Metall. 1, 22 (1953).
• [25] B.L. Averbach, M. Cohen, Trans. AIME 176, 401 (1948).
• [26] C.N. Sastry, K.H. Khan, W.E. Wood, Metall. Trans. A 13A, 676 (1982).
• [27] R.O. Ritchie, R.M. Horn, Metall. Trans. A 9A, 331(1978).
• [28] M.M. Bilal, K. Yaqoob, M.H. Zahid, U.H. Ehsan, W.H. Tanveer, A. Wadood, B. Ahmed, J. Mater. Res. Technol. 8, 5194 (2019).
• [29] S. Zhirafar, A. Rezaeian, M. Pugh, J. Mater. Process. Technol. 186, 298 (2007).
• [30] P. Phetlam, V. Uthaisangsuk, Mater. Des. 82, 189 (2015).
• [31] N. Niazi, S. Nisar, A. Shah, Int. J. Mater. Sci. Eng. 5, 6 (2014).
• [32] M. Houssny-Emam, M.N. Bassim, Mater. Sci. Eng. 61, 79 (1983).
• [33] I. Polyzois, N. Bassim, Mater. Sci. Eng. A 631, 18 (2015).
• [34] J. Burke, Kinetics of Phase Transformation in Metals, Pergamon Press, Oxford, United Kingdom, 1965.
• [35] O. Matsumura, Y. Sakuma, H. Takechi, Scr. Mater. 21, 1301 (1987).
• [36] N. Tsuchida, Y. Tomota, Mater. Sci. Eng. A. 285, 345 (2000).
• [37] S.J. Oh, B.C. Kim, M.C. Suh, I.J. Shon, S.J. Lee, Arch. Metall. Mater. 64, 863 (2019).
• [38] D. Park, S.J. OH, I.J. Shon, S.J. Lee, Arch. Metall. Mater. 63, 1479 (2018).

Uwagi

1. This work was supported by a Korea Institute for Advancement of Technology grant, funded by the Korea Government (MOTIE) (P0002019), as part of the Competency Development Program for Industry Specialist. This work was supported by the Technology Innovation Program (20011879) funded by the Ministry of Trade, Industry & Energy (MOTIE, Korea).

2. Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).