Impact of power-cable length on operation of NPC inverter fed induction motor drive for various LC filter topologies

• Autorzy: Dawidowski P. , Sowa K. , Stosur M. , Szewczyk M. , Piasecki W. , Balcerek P.

Warianty tytułu

PL

Wpływ długości kabla na pracę trójpoziomowego falownika NPC zasilającego silnik indukcyjny dla różnych konfiguracji filtrów LC

• Języki publikacji: EN

Abstrakty

EN

This paper presents detailed analysis of phenomena which occur in cable connection between the drive and the motor. The impact of cable length on the proper inverter operation as well as protection against additional stress of motor caused by reflection in cable is analyzed, on a model developed for this purpose. Several configurations of output LC filters were implemented to investigate the optimal solution to reduce transient effect caused by dv/dt and high order harmonics.

PL

W artykule przedstawiono analizę zjawisk występujących w układzie zasilania silnika indukcyjnego z trójpoziomowego falownika napięcia poprzez linię kablową. Zbadano wpływ długości linii kablowej na przebiegi wyjściowe falownika dla różnych konfiguracji filtra. Celem badań było ustalenia topologii filtra zapewniającej uniwersalność rozwiązania napędu przekształtnikowego, a zarazem eliminującej niekorzystne zjawiska występujące w tego typu układach.

Słowa kluczowe

EN

NPC inverter; cable connection; voltage reflection; LC filter

PL

trójpoziomowy falownik napięcia; połączenie kablowe; odbicie fali elektromagnetycznej; filtr LC

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2013
• Tom: R. 89, nr 9
• Strony: 200--204
• Opis fizyczny: Bibliogr. 22 poz., rys., tab.

Twórcy

autor

Dawidowski P.

• ABB Corporate Research Center - Poland

autor

Sowa K.

• AGH University of Science and Technology

autor

Stosur M.

• ABB Corporate Research Center - Poland

autor

Szewczyk M.

• ABB Corporate Research Center - Poland

autor

Piasecki W.

• ABB Corporate Research Center - Poland

autor

Balcerek P.

• ABB Corporate Research Center - Poland

Bibliografia

• [1] Presson E., Transient Effect in Application of PWM Inverters to Industrial Motors, Conference Record of the Annual IEEE Pulp and Paper Industry Technical Conference (1991)
• [2] Jouanne A., Enjeti P., Gray W., The effect of long motor leads on PWM inverter fed AC motor drive systems, Applied Power Electronics Conference and Exposition Conference Proceedings (1995), vol. 2, 592-597
• [3] Electrical braking Technical guide no. 8, ABB drives (2011)
• [4] Wu B., High-Power Converters and AC Drives, Wiley-IEEE Press (2006)
• [5] Steinke J.K., Use of an LC Filter to Achieve a Motor-Friendly Performance of the PWM Voltage Source Inverter, IEEE Transactions on Energy Conversion, vol. 14 (1999), no. 1, 649-654
• [6] Florkowska B., Florkowski M., Furgal J., Pajak P., Roehrich J., Zydroń P., Influence of fast switching phenomena on electrical insulation systems, Przegląd Elektrotechniczny - Electrical Review, Warsaw, no 4, (2010), 158-162
• [7] Wlodek R. Roehrich J., Zydroń P. , Analysis of overvoltage on motor winding insulation fed by PWM pulses, High Voltage Engineering and Application (ICHVE), International Conference on, (2010), 584-587
• [8] Florkowska B., Zydroń P., Florkowski M., Effects of inverter pulses on the electrical insulation system of motors, Industrial Electronics (ISIE), IEEE International Symposium on, (2011) 573-578
• [9] Cetin N.O. , Hava A.M., Interaction between the filter and PWM units in the sine filter configuration utilizing three-phase AC motor drives employing PWM inverters, Energy Conversion Congress and Exposition, (2010), 2592-2599
• [10] Piróg S., Power electronics: systems with network and hard commutations, AGH Uczelniane Wydawnictwa Naukowo- Dydaktyczne, (2006)
• [11] Steinke J.K., Steimer P.K., Medium voltage drive converter for industrial applications in the power range from 0.5 MW to 5 MW based on a three-level converter equipped with IGCTs, PWM Medium Voltage Drives, no. 2000/063, IEE Seminar (2000), 1-4
• [12] Cor zine K.A., Baker J.R., Multilevel voltage-source dutycycle modulation: analysis and implementation, IEEE Transactions on Industrial Electronics, vol. 49, no. 5, (2002), 1009-1016
• [13] Finlayson P.T., Output filters for PWM drives with induction motors, Pulp and Paper Industry Technical Conference (1997) Annual, 186-193
• [14] Jouanne A., Rendusara D.A., Enjeti P.N., Gray, J.W., Filtering techniques to minimize the effect of long motor leads on PWM inverter-fed AC motor drive systems, IEEE Trans. on Industry Applications, vol. 32, no. 4, (1996), 919-926
• [15] Ahmed K.H., Finney S.J., Williams B.W., Passive Filter Design for Three-Phase Inverter Interfacing in Distributed Generation, Compatibility in Power Electronics, (2007),1-9
• [16] SimPowerSystem Documentation: The Mathworks Inc. (2012)
• [17] Mohamed K., Sid A.Z., Samir H., Mohammed K., Comparison of HVDC line models in PSB/SIMULINK based on steady-state and transients considerations, Acta Electrotechnica et Informatica, vol. 8, no. 2, (2008), 50-55
• [18] Wei S., Zargari N., Wu B., Rizzo S., Comparison and Mitigation of Common-Mode Voltage in Power Converter Topologies, IEEE Industry Applications Society (IAS) Conference (2004), 1852-1857
• [19] IEEE Std 519-1992, IEEE Recommended Practices and Requirements for Harmonic Control in Electrical Power Systems, Institute of Electrical and Electronics Engineers, Inc. (1993)
• [20] IEC 61000-4-7:2002, Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques- General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto (2002)
• [21] High voltage Cast iron motors: Technical data for totally enclosed squirrel cage three phase motors, ABB (2011)
• [22] XLPE Land Cable Systems- User´s Guide, ABB (2010)