Experimental investigation of mechanical stiffness in lattice structures fabricated with PLA using fused deposition modelling

• Autorzy: Eljihad A. , Nassraoui M. , Bouksou O.

Identyfikatory

DOI

10.5604/01.3001.0053.9491

• Języki publikacji: EN

Abstrakty

EN

Purpose: The objective of the paper is to design and characterise with polylactic acid (PLA) material three cellular structures in the form of lattices which are diagonal-octet-centred shapes for two sizes 6x6x6 and 12x12x12 with a compression test to examine their stiffness using FDM technology compared to polyjet technology. Design/methodology/approach: The study used two analytical approaches to investigate lattice structures: experimental analysis and theoretical analysis. Experimental methods such as compression tests were conducted to determine the characteristics of lattice structures. In addition, theoretical analysis was conducted using Hook's law and Ashby's Gibson model to predict appropriate behaviour. The combination of experimental and theoretical methods provided a comprehensive understanding of lattice structures and their properties. Findings: The experimental study examined the impact of the shape and size of a lattice structure on the stiffness and lightness of objects 3D printed with FDM technology by PLA material. The research revealed that the 6x6x6 diagonal lattice structure size provided a good balance between stiffness and lightness. While the 6x6x6 byte structure was even lighter, with a mass ratio of 2.09 compared to the diagonal structure, it was less rigid, with a ratio of 0.43, making the diagonal structure more suitable for certain applications. The study highlights the importance of considering both the shape and size of the lattice structure when designing 3D-printed objects with specific mechanical properties; the chosen structure could be a good choice for applications where stiffness and lightness are important. Research limitations/implications: The limitations of the research lie in its limited scope, focusing primarily on the effect of shape (octet-diagonal centred) and unit cell size on Young's modulus of PLA material. Other aspects of 3D printing, such as material selection and thermal properties, were not considered. Furthermore, the results obtained are specific to the printing parameters and experimental conditions chosen, which limits their generalizability to other 3D printing configurations or methods. However, these results have important implications for optimising the PLA printing process. They enable the identification of optimal parameters, such as unit cell shape and size, to produce stiffer, higher-quality structures. In addition, the research is helping to improve the mechanical properties of 3D-printed lattice parts, paving the way for more efficient manufacturing methods and stronger components. Practical implications: Our analysis can be used as a decision aid for the design of FDM lattice parts. Indeed, we can choose the diagonal structure of 6x6x6, which would provide favourable stiffness for functional parts. Originality/value: The paper explores the compression test of lattice structures using FDM technology, which presents a new direction for additive manufacturing. The study takes an experimental approach to evaluate the reliability of various additive manufacturing technologies for creating lattice structures. The study results provide insight into the most reliable technology for producing lattice structures.

Słowa kluczowe

EN

additive manufacturing; topological optimisation; mechanical properties; unit cell; lattice structures

PL

wytwarzanie przyrostowe; optymalizacja topologiczna; właściwości mechaniczne; komórka elementarna; struktury kratowe

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2023
• Tom: Vol. 119, nr 2
• Strony: 60--71
• Opis fizyczny: Bibliogr. 22 poz., rys., tab., wykr.

Twórcy

autor

Eljihad A.

• National high School of Electricity and Mechanics, University Hassan II of Casablanca, Casablanca, Morocco
• Laboratory of Mechanics, Production, and Industrial Engineering, High School of Technology of Casablanca, University Hassan II of Casablanca, Casablanca, Morocco

• https://orcid.org/0000-0002-5759-5872

autor

Nassraoui M.

• Laboratory of Mechanics, Production, and Industrial Engineering, High School of Technology of Casablanca, University Hassan II of Casablanca, Casablanca, Morocco

• https://orcid.org/0000-0002-2272-2149

autor

Bouksou O.

• Laboratory of Mechanics, Production, and Industrial Engineering, High School of Technology of Casablanca, University Hassan II of Casablanca, Casablanca, Morocco

Bibliografia

• [1] G.S. Sandhu, K.S. Boparai, K.S. Sandhu, Influence of slicing parameters on selected mechanical properties of fused deposition modeling prints, Materials Today: Proceedings 48/5 (2021) 1378-1382. DOI: https://doi.org/10.1016/j.matpr.2021.09.118
• [2] N. Kladovasilakis, K. Tsongas, D. Karalekas, D. Tzetzis, Architected Materials for Additive Manufacturing: A Comprehensive Review, Materials 15/17 (2022) 5919. DOI: https://doi.org/10.3390/ma15175919
• [3] M. Ouhsti, B. El Haddadi, S. Belhouideg, Effect of printing parameters on the mechanical properties of parts fabricated with open-source 3D printers in PLA by fused deposition modeling, Mechanics and Mechanical Engineering 22/4 (2018) 895-907. DOI: https://doi.org/10.2478/mme-2018-0070
• [4] O. Eren, H.K. Sezer, N. Yalçn, Effect of lattice design on mechanical response of PolyJet additively manufactured cellular structures, Journal of Manufacturing Processes 75 (2022) 1175-1188. DOI: https://doi.org/10.1016/j.jmapro.2022.01.063
• [5] A. Eljihad, M. Nassraoui, O. Bouksour, Topological optimization of a multibody system by the SIMP method, Uncertainties and Reliability of Multiphysics Systems 6/2 (2023) 1-9 (in French). DOI: https://doi.org/10.21494/ISTE.OP.2023.0919
• [6] J. Wu, O. Sigmund, J.P. Groen, Topology optimization of multi-scale structures: a review, Structural and Multidisciplinary Optimization 63/3 (2021) 1455-1480. DOI: https://doi.org/10.1007/s00158-021-02881-8
• [7] N. Boyard, M. Rivette, O. Christmann, S. Richir, Design methodology for the production of parts in Additive Manufacturing, Proceedings of the 10th International Congress of Industrial Engineering “CIGI”, France, 2013 (in French).
• [8] R.N. Patil, S.N. Nagaonkar, N.B. Shah, T.S. Bhat, B. Almale, S. Gosavi, A. Gujrathi, Study of Perception and Help Seeking Behaviour Among Parents for Their Children With Psychiatric Disorder: A Community Based Cross-Sectional Study, The Journal of Medical Research 2/1 (2016) 6-11.
• [9] C. Bhat, A. Kumar, S.C. Lin, J.Y. Jeng, Design, fabrication, and properties evaluation of novel nested lattice structures, Additive Manufacturing 68 (2023) 103510. DOI: https://doi.org/10.1016/j.addma.2023.103510
• [10] C. Bhat, A. Kumar, S.C. Lin, J.Y. Jeng, A novel bioinspired architectured materials with interlocking designs based on tessellation, Additive Manufacturing 58 (2022) 103052. DOI: https://doi.org/10.1016/j.addma.2022.103052
• [11] V.S. Deshpande, M.F. Ashby, N.A. Fleck, Foam topology: bending versus stretching dominated architectures, Acta Materialia 49/6 (2001) 1035-1040. DOI: https://doi.org/10.1016/S1359-6454(00)00379-7
• [12] L. Marșavina, C. Vălean, M. Mărghitaș, E. Linul, N. Razavi, F. Berto, R. Brighenti, Effect of the manufacturing parameters on the tensile and fracture properties of FDM 3D-printed PLA specimens, Engineering Fracture Mechanics 274 (2022) 108766. DOI: https://doi.org/10.1016/j.engfracmech.2022.108766
• [13] M.A. El-Sayed, K. Essa, M. Ghazy, H. Hassanin, Design optimization of additively manufactured titanium lattice structures for biomedical implants, The International Journal of Advanced Manufacturing Technology 110/9-10 (2020) 2257-2268. DOI: https://doi.org/10.1007/s00170-020-05982-8
• [14] S. Maślanka, J. Juszczyński, T. Kraszewski, W. Oleksy, Properties of polylactide, obtained from lactic acid in the process of lactic fermentation of lactose in whey post production (waste), Journal of Achievements in Materials and Manufacturing Engineering 90/2 (2018) 58-68. DOI: https://doi.org/10.5604/01.3001.0012.8384
• [15] Stratasys Inc, “A Global Leader in Applied Additive Technology Solutions,” 2017.
• [16] H. Salem, H. Abouchadi, K. Elbikri, PLA Mechanical Performance Before and After 3D Printing, International Journal of Advanced Computer Science and Applications 13/3 (2022) 324-330. DOI: https://doi.org/10.14569/IJACSA.2022.0130340
• [17] Pro3 Series 3D Printer User Manual.
• [18] O. Aourik, M. Othmani, B. Saadouki, K. Abouzaid, A. Chouaf, Fracture toughness of ABS additively manufactured by FDM process, Journal of Achievements in Materials and Manufacturing Engineering 109/2 (2021) 49-58. DOI: https://doi.org/10.5604/01.3001.0015.6258
• [19] Kern & Sohn GmbH, Kern EW 150-3M Datasheet, 2013, 28.
• [20] P.G. Ikonomov, A. Yahamed, P.D. Fleming, A. Pekarovicova, Design and testing 3d printed structures for bone replacements, Journal of Achievements in Materials and Manufacturing Engineering 101/2 (2020) 76-85. DOI: https://doi.org/10.5604/01.3001.0014.4922
• [21] K.M. Park, K.S. Min, Y.S. Roh, Design Optimization of Lattice Structures under Compression: Study of Unit Cell Types and Cell Arrangements, Materials 15/1 (2022) 97. DOI: https://doi.org/10.3390/ma15010097
• [22] M.F. Afrose, S.H. Masood, P. Iovenitti, M. Nikzad, I. Sbarski, Effects of part build orientations on fatigue behaviour of FDM-processed PLA material, Progress in Additive Manufacturing 1/1 (2016) 21-28. DOI: https://doi.org/10.1007/s40964-015-0002-3

Uwagi

PL

Opracowanie rekordu ze środków MNiSW, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2024).