Mechanical and Dielectric Properties of Hybrid Carbon Nanotubes-Woven Glass Fibre Reinforced Epoxy Laminated Composites via the Electrospray Deposition Method

• Autorzy: Zakaria Muhammad Razlan , Khairuddin Nur Aishahatul Syafiqa Mohammad , Omar Mohd Firdaus , Akil Hazizan Md , Othman Muhammad Bisyrul Hafi , Al Bakri Abdullah Mohd Mustafa , Abd Rahim Shayfull Zamree , Ting Sam Sung , Azmi Azida

Identyfikatory

DOI

10.24425/amm.2022.137804

• Języki publikacji: EN

Abstrakty

EN

Herein, the effects of multi-walled carbon nanotubes (CNTs) on the mechanical and dielectric performance of hybrid carbon nanotube-woven glass fiber (GF) reinforced epoxy laminated composited are investigated. CNTs are deposited on woven GF surface using an electrospray deposition method which is rarely reported in the past. The woven GF deposited with CNT and without deposited with CNT are used to produce epoxy laminated composites using a vacuum assisted resin transfer moulding. The tensile, flexural, dielectric constant and dielectric loss properties of the epoxy laminated composites were then characterized. The results confirm that the mechanical and dielectric properties of the woven glass fiber reinforced epoxy laminated composited increases with the addition of CNTs. Field emission scanning electron microscope is used to examine the post damage analysis for all tested specimens. Based on this finding, it can be prominently identified some new and significant information of interest to researchers and industrialists working on GF based products.

Słowa kluczowe

EN

glass fibre; carbon nanotubes; hybrid material; epoxy laminated composites

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2022
• Tom: Vol. 67, iss. 2
• Strony: 669--675
• Opis fizyczny: Bibliogr. 30 poz., fot., rys., tab.

Twórcy

autor

Zakaria Muhammad Razlan

• Universiti Malaysia Perlis (UniMAP), Faculty of Chemical Engineering Technology, Perlis, Malaysia
• Universiti Malaysia Perlis (UniMAP), Geopolymer & Green Technology, Centre of Excellent (CEGeoGTech), Perlis, Malaysia

• https://orcid.org/0000-0001-8094-6864

autor

Khairuddin Nur Aishahatul Syafiqa Mohammad

• Universiti Sains Malaysia, School of Materials and Mineral Resources Engineering, Engineering Campus, 14300 Nibong Tebal, Pulau Pinang, Malaysia

• https://orcid.org/0000-0002-5441-1062

autor

Omar Mohd Firdaus

• Universiti Malaysia Perlis (UniMAP), Faculty of Chemical Engineering Technology, Perlis, Malaysia
• Universiti Malaysia Perlis (UniMAP), Geopolymer & Green Technology, Centre of Excellent (CEGeoGTech), Perlis, Malaysia

• https://orcid.org/0000-0002-6365-6272

autor

Akil Hazizan Md

• Universiti Sains Malaysia, School of Materials and Mineral Resources Engineering, Engineering Campus, 14300 Nibong Tebal, Pulau Pinang, Malaysia

• https://orcid.org/0000-0002-7422-4627

autor

Othman Muhammad Bisyrul Hafi

• Universiti Sains Malaysia, School of Chemical Sciences, 11800 Minden, Penang, Malaysia

• https://orcid.org/0000-0003-1443-622X

autor

Al Bakri Abdullah Mohd Mustafa

• Universiti Malaysia Perlis (UniMAP), Faculty of Chemical Engineering Technology, Perlis, Malaysia
• Universiti Malaysia Perlis (UniMAP), Geopolymer & Green Technology, Centre of Excellent (CEGeoGTech), Perlis, Malaysia

• https://orcid.org/0000-0002-9779-8586

autor

Abd Rahim Shayfull Zamree

• Universiti Malaysia Perlis (UniMAP), Geopolymer & Green Technology, Centre of Excellent (CEGeoGTech), Perlis, Malaysia

• https://orcid.org/0000-0002-1458-9157

autor

Ting Sam Sung

• Universiti Malaysia Perlis (UniMAP), Faculty of Chemical Engineering Technology, Perlis, Malaysia
• Universiti Malaysia Perlis (UniMAP), Geopolymer & Green Technology, Centre of Excellent (CEGeoGTech), Perlis, Malaysia

• https://orcid.org/0000-0003-2916-0799

autor

Azmi Azida

• Universiti Malaysia Perlis (UniMAP), Faculty of Chemical Engineering Technology, Perlis, Malaysia

• https://orcid.org/0000-0003-3509-0539

Bibliografia

• [1] G. Yang, X. Feng, W. Wang, Q. Ouyang, L. Liu, Z. Wu, Graphene and carbon nanotube-based high-sensitive film sensors for in-situ monitoring out-of-plane shear damage of epoxy composites, Composites Part B: Engineering 204, 108494 (2021).
• [2] H. Kim, S. Gao, S. Hong, P.-C. Lee, Y.L. Kim, J.U. Ha, S.K. Jeoung, Y.J. Jung, Multifunctional primer film made from percolation enhanced CNT/Epoxy nanocomposite and ultrathin CNT network, Composites Part B: Engineering 175, 107107 (2019).
• [3] J.-M. Park, P.-G. Kim, J.-H. Jang, Z. Wang, J.-W. Kim, W.-I. Lee, J.-G. Park, K. Lawrence DeVries, Self-sensing and dispersive evaluation of single carbon fiber/carbon nanotube (CNT)-epoxy composites using electro-micromechanical technique and nondestructive acoustic emission, Composites Part B: Engineering 39 (7), 1170-1182 (2008).
• [4] X. Yao, X. Gao, J. Jiang, C. Xu, C. Deng, J. Wang, Comparison of carbon nanotubes and graphene oxide coated carbon fiber for improving the interfacial properties of carbon fiber/epoxy composites, Composites Part B: Engineering 132, 170-177 (2018).
• [5] M.K. Hassanzadeh-Aghdam, M.J. Mahmoodi, J. Jamali, R. Ansari, A new micromechanical method for the analysis of thermal conductivities of unidirectional fiber/CNT-reinforced polymer hybrid nanocomposites, Composites Part B: Engineering 175, 107137 (2019).
• [6] N. Domun, C. Kaboglu, K.R. Paton, J.P. Dear, J. Liu, B.R.K. Blackman, G. Liaghat, H. Hadavinia, Ballistic impact behaviour of glass fibre reinforced polymer composite with 1D/2D nanomodified epoxy matrices, Composites Part B: Engineering 167, 497-506 (2019).
• [7] M.R. Zakaria, M.H. Abdul Kudus, H. Md. Akil, M.Z. Mohd Thirmizir, Comparative study of graphene nanoparticle and multiwall carbon nanotube filled epoxy nanocomposites based on mechanical, thermal and dielectric properties, Composites Part B: Engineering 119, 57-66 (2017).
• [8] M.R. Zakaria, H.M. Akil, M.H.A. Kudus, S.S.M. Saleh, Enhancement of tensile and thermal properties of epoxy nanocomposites through chemical hybridization of carbon nanotubes and alumina, Composites Part A: Applied Science and Manufacturing 66, 109-116 (2014).
• [9] M.R. Zakaria, M.H. Abdul Kudus, H. Md Akil, M.Z.M. Thirmizir, M.F.I. Abdul Malik, M.B.H. Othman, F. Ullah, F. Javed, Comparative study of single-layer graphene and single-walled carbon nanotube-filled epoxy nanocomposites based on mechanical and thermal properties, Polymer Composites 40 (S2), 1840-1849 (2019).
• [10] M.H. Abdul Kudus, M.R. Zakaria, M.B. Hafi Othman, H. Md Akil, Preparation and characterization of colloidized diamine/oxidized-graphene via condensation polymerization of carboxyl groups epoxy/oxidized-graphene nanocomposite, Polymer 124, 186-202 (2017).
• [11] M. Lay, A. Rusli, M.K. Abdullah, Z.A. Abdul Hamid, R.K. Shuib, Converting dead leaf biomass into activated carbon as a potential replacement for carbon black filler in rubber composites, Composites Part B: Engineering 201, 108366 (2020).
• [12] M.R. Zakaria, H. Md. Akil, M.H. Abdul Kudus, A.H. Kadarman, Improving flexural and dielectric properties of MWCNTt/epoxy nanocomposites by introducing advanced hybrid filler system, Composite Structures 132, 50-64 (2015).
• [13] M.R. Zakaria, H.M. Akil, M.H. Abdul Kudus, M.B.H. Othman, Compressive properties and thermal stability of hybrid carbon nanotube-alumina filled epoxy nanocomposites, Composites Part B: Engineering 91, 235-242 (2016).
• [14] N.S.A.A. Bakhtiar, H.M. Akil, M.R. Zakaria, M.H.A. Kudus, M.B.H. Othman, New generation of hybrid filler for producing epoxy nanocomposites with improved mechanical properties, Materials & Design 91, 46-52 (2016).
• [15] V. Sharma, V. Sharma, M.S. Goyat, A. Hooda, J.K. Pandey, A. Kumar, R. Gupta, A.K. Upadhyay, R. Prakash, J.B. Kirabira, P. Mandal, P.K. Bhargav, Recent progress in nano-oxides and CNTts based corrosion resistant superhydrophobic coatings: a critical review, Progress in Organic Coatings 140,105512 (2020).
• [16] L.R. Pokhrel, N. Ettore, Z.L. Jacobs, A. Zarr, M.H. Weir, P.R. Scheuerman, S.R. Kanel, B. Dubey, Novel carbon nanotube (CNT)-based ultrasensitive sensors for trace mercury(II) detection in water: A review, Science of The Total Environment 574, 1379-1388 (2017).
• [17] G. Zhao, H.-Y. Liu, X. Du, H. Zhou, Z. Pan, Y.-W. Mai, Y.-Y. Jia, W. Yan, Flame synthesis of carbon nanotubes on glass fibre fabrics and their enhancement in electrical and thermal properties of glass fibre/epoxy composites, Composites Part B: Engineering 198, 108249 (2020).
• [18] A. Godara, L. Gorbatikh, G. Kalinka, A. Warrier, O. Rochez, L. Mezzo, F. Luizi, A.W. van Vuure, S.V. Lomov, I. Verpoest, Interfacial shear strength of a glass fiber/epoxy bonding in composites modified with carbon nanotubes, Composites Science and Technology 70 (9), 1346-1352 (2010).
• [19] M.R. Zakaria, H. Md Akil, M.H. Abdul Kudus, F. Ullah, F. Javed, N. Nosbi, Hybrid carbon fiber-carbon nanotubes reinforced polymer composites: A review, Composites Part B: Engineering 176, 107313 (2019).
• [20] M.R. Zakaria, H. Md Akil, M.F. Omar, M.H. Abdul Kudus, F.N.A. Mohd Sabri, M.M.A.B. Abdullah, Enhancement of mechanical and thermal properties of carbon fiber epoxy composite laminates reinforced with carbon nanotubes interlayer using electrospray deposition, Composites Part C: Open Access 3, 100075 (2020).
• [21] J.R. Pothnis, D. Kalyanasundaram, S. Gururaja, Enhancement of open hole tensile strength via alignment of carbon nanotubes infused in glass fiber - epoxy - CNT multi-scale composites, Composites Part A: Applied Science and Manufacturing 140, 106155 (2021).
• [22] A. Rogani, P. Navarro, S. Marguet, J.F. Ferrero, C. Lanouette, Study of post-impact behaviour of thin hybrid carbon/epoxy and glass/epoxy woven composite laminates under fatigue tensile loading - Part II: Numerical study, Composite Structures 260, 113451 (2021).
• [23] R.K. Prusty, D.K. Rathore, B.C. Ray, Evaluation of the role of functionalized CNT in glass fiber/epoxy composite at above- and sub-zero temperatures: emphasizing interfacial microstructures, Composites Part A: Applied Science and Manufacturing 101, 215-226 (2017).
• [24] K. Yildiz, İ. Gürkan, F. Turgut, F.Ç. Cebeci, H. Cebeci, Fracture toughness enhancement of fuzzy CNT-glass fiber reinforced composites with a combined reinforcing strategy, Composites Communications 21, 100423 (2020).
• [25] R.P. Behera, P. Rawat, K.K. Singh, Tensile Behavior of Three Phased Glass/Epoxy Laminate Embedded with MWCNTs: An Experimental Approach, Materials Today: Proceedings 5 (2, Part 2), 8176-8183 (2018).
• [26] F.N.A.M. Sabri, M.R. Zakaria, H.M. Akil, Enhanced flexural strength of carbon nanotubes-glass fiber epoxy composite laminates using an electrospray deposition technique, Polymer Composites 42 (5), 2556-2564 (2021).
• [27] W.S. Chin, D.G. Lee, Laminating rule for predicting the dielectric properties of e-glass/epoxy laminate composite, Composite Structures 77 (3), 373-382 (2007).
• [28] X. Lu, A. Zhang, O. Dubrunfaut, D. He, L. Pichon, J. Bai, Numerical modeling and experimental characterization of the AC conductivity and dielectric properties of CNT/polymer nanocomposites, Composites Science and Technology 194, 108150, (2020).
• [29] M.R. Zakaria, H.M. Akil, M.F. Omar, M.M.A.B. Abdullah, A.A.A. Rahman, M.B.H. Othman, Improving flexural and dielectric properties of carbon fiber epoxy composite laminates reinforced with carbon nanotubes interlayer using electrospray deposition, Nanotechnology Reviews 9 (1), 1170-1182 (2020).
• [30] C. Liu, T. Zhang, F. Daneshvar, S. Feng, Z. Zhu, M. Kotaki, M. Mullins, H.-J. Sue, High dielectric constant epoxy nanocomposites based on metal organic frameworks decorated multi-walled carbon nanotubes, Polymer 207, 122913 (2020).

Uwagi

1. The authors would like to acknowledge Universiti Sains Malaysia (USM) RUI 1001/PBAHAN/8014047 for sponsoring and providing financial assistance during this research work and Universiti Malaysia Perlis for sponsoring postdoctoral fellowship.

2. Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).