Activated lignin and aminosilane-grafted silica as precursors in hybrid material production

• Autorzy: Klapiszewski L. , Szalaty T. J. , Zdarta J. , Jesionowski T.

Identyfikatory

DOI

10.5277/ppmp160138

• Języki publikacji: EN

Abstrakty

EN

Functional inorganic-organic hybrids were synthesized using as a precursor silica with the addition of an appropriate amount of lignin as components. Three types of silica were applied as the support: the commercial silicas Syloid 244 and Aerosil 200, and hydrated silica precipitated in a polar system. The silicon dioxide was initially functionalized with aminosilane to activate the surface, and then the silica-based material was combined with lignin oxidized using hydrogen peroxide. The obtained inorganic-organic hybrids underwent physicochemical and dispersive-morphological analysis, with comparison of the results depending on the composition of the test samples. In addition, particle size distributions were determined and the surface structure of the products assessed by scanning electron microscopy. The presence of functional groups was also determined by FTIR spectroscopy. The thermal analysis of the silica/lignin materials was also performed, as well as the elemental and colorimetric analyses, which indirectly confirmed the correctness of the synthesis process. Hybrid materials with the most favorable dispersive and morphological properties were obtained by adding a small amount of biopolymer. The thermogravimetric analysis of the SiO2/lignin hybrids indicated their good thermal stability. With increasing quantity of lignin per 100 parts by weight of silica matrix, progressive deterioration in the thermal stability of the materials was observed.

Słowa kluczowe

EN

SiO2/lignin hybrids; silica; lignin; lignin activation; thermal stability; hybrid material

• Wydawca: Oficyna Wydawnicza Politechniki Wrocławskiej
• Czasopismo: Physicochemical Problems of Mineral Processing
• Rocznik: 2016
• Tom: Vol. 52, iss. 1
• Strony: 459--478
• Opis fizyczny: Bibliogr. 38 poz., rys., tab.

Twórcy

autor

Klapiszewski L.

• Poznan University of Technology, Faculty of Chemical Technology, Institute of Chemical Technology and Engineering, Berdychowo 4, PL-60965, Poznan, Poland

autor

Szalaty T. J.

• Poznan University of Technology, Faculty of Chemical Technology, Institute of Chemical Technology and Engineering, Berdychowo 4, PL-60965, Poznan, Poland

autor

Zdarta J.

• Poznan University of Technology, Faculty of Chemical Technology, Institute of Chemical Technology and Engineering, Berdychowo 4, PL-60965, Poznan, Poland

autor

Jesionowski T.

• Poznan University of Technology, Faculty of Chemical Technology, Institute of Chemical Technology and Engineering, Berdychowo 4, PL-60965, Poznan, Poland

Bibliografia

• BERGNA H.E., ROBERTS W.O., 2006, Colloidal Silica: Fundamentals and Applications, Taylor & Francis Group, Boca Raton.
• BOERJAN W., RALPH J., BAUCHER M., 2003, Lignin biosynthesis. Annual Review of Plant Biology, 54, 519–546.
• BULA K., KLAPISZEWSKI L., JESIONOWSKI T., 2015, A novel functional silica/lignin hybrid material as a potential bio-based polypropylene filler. Polymer Composites, 36, 913–922.
• CRESTINI C., SALADINO R., TAGLIATESTA P., BOSCHI T., 1999, Biomimetic degradation of lignin and lignin model compounds by synthetic anionic and cationic water soluble manganese and iron porphyrins. Bioorganic & Medicinal Chemistry, 7, 1897–1905.
• CRESTINI C., CRUCIANELLI M., ORLANDI M., SALADINO R., 2010, Oxidative strategies in lignin chemistry: A new environmental friendly approach for the functionalization of lignin and lignocellulosic fibers. Catalysis Today, 156, 8–22.
• DONALDSON L.A., 2001, Lignification and lignin topochemistry – an ultrastructural view. Phytochemistry, 57, 859–873.
• HASEGAWA I., FUKUDA Y., OKADA T., KAJIWARA M., 1998, Lignin-silica-titania hybrids as precursors for Si–Ti–C–O fibers. Journal of Sol-Gel Science and Technology, 13, 485–488.
• HASEGAWA I., FUJII Y.S., YAMADA K., KARIYA C., TAKAYAMA T., 1999, Lignin–silica hybrids as precursors for silicon carbide. Journal of Applied Polymer Science, 73, 1321–1328.
• JESIONOWSKI T., KRYSZTAFKIEWICZ A., 2000, Comparison of the techniques used to modify amorphous hydrated silica. Journal of Non-Crystalline Solids, 277, 45–57.
• JESIONOWSKI T., 2001, Preparation of colloidal silica from sodium metasilicate solution and sulphuric acid in emulsion medium. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 190, 153–165.
• JESIONOWSKI T., 2009, Preparation of spherical silica in emulsion systems using the co-precipitation technique. Materials Chemistry and Physics, 113, 839–849.
• JESIONOWSKI T., CIESIELCZYK F., KRYSZTAFKIEWICZ A., 2010, Influence of selected alkoxysilanes on dispersive properties and surface chemistry of spherical silica precipitated in emulsion media. Materials Chemistry and Physics, 119, 65–74.
• JESIONOWSKI T., KLAPISZEWSKI L., MILCZAREK G., 2014a, Structural and electrochemical properties of multifunctional silica/lignin materials. Materials Chemistry and Physics, 147, 1049–1057.
• JESIONOWSKI T., KLAPISZEWSKI L., MILCZAREK G., 2014b, Kraft lignin and silica as precursors of advanced composite materials and electroactive blends. Journal of Materials Science, 49, 1376–1385.
• KADOKAWA J., 2013, Applications of Ionic Liquids in Lignin Chemistry, InTech, Rijeka.
• KLAPISZEWSKI L., MADRAWSKA M., JESIONOWSKI T., 2012, Preparation and characterisation of hydrated silica/lignin biocomposites. Physicochemical Problems of Mineral Processing, 48, 463–473.
• KLAPISZEWSKI L., NOWACKA M., SZWARC-RZEPKA K., JESIONOWSKI T., 2013a, Advanced biocomposites based on silica and lignin precursors. Physicochemical Problems of Mineral Processing, 49, 463–473.
• KLAPISZEWSKI L., NOWACKA M., MILCZAREK G., JESIONOWSKI T., 2013b, Physicochemical and electrokinetic properties of silica/lignin biocomposites. Carbohydrate Polymers, 94, 345–355.
• KLAPISZEWSKI L., ZDARTA J., SZATKOWSKI T., WYSOKOWSKI M., NOWACKA M., SZWARC-RZEPKA K., BARTCZAK P., SIWIŃSKA-STAFAŃSKA K., EHRLICH H., JESIONOWSKI T., 2014, Silica/lignosulfonate hybrid materials: Preparation and characterization. Central European Journal of Chemistry, 12, 719–735.
• KLAPISZEWSKI L., BARTCZAK P., WYSOKOWSKI M., JANKOWSKA M., KABAT K., JESIONOWSKI T., 2015, Silica conjugated with kraft lignin and its use as a novel ‘green’ sorbent for hazardous metal ions removal. Chemical Engineering Journal, 260, 684–693.
• KRYSZTAFKIEWICZ A., RAGER B., JESIONOWSKI T., 1997, The effect of surface modification on physicochemical properties of precipitated silica. Journal of Materials Science, 32, 1333–1339.
• LANGE H., DECINA S., CRESTINI C., 2013, Oxidative upgrade of lignin – Recent routes reviewed. European Polymer Journal, 49, 1151–1173.
• LOTA G., MILCZAREK G., 2011, The effect of lignosulfonates as electrolyte additives on the electrochemical performance of supercapacitors. Electrochemistry Communications, 13, 470–473.
• MEISTER J.J., 2002, Modification of lignin. Journal of Macromolecular Science C: Polymer Reviews, 42, 235–289.
• MISHRA S.B., MISHRA A.K., KRAUSE R.W., MAMBA B.B., 2009, Synthesis of silicon carbide nanowires from a hybrid of amorphous biopolymer and sol-gel derived silica. Journal of the American Ceramic Society, 92, 3052–3058.
• RALPH J., LUNDQUIST K., BRUNOW G., LU F., KIM H., SCHATZ P.F., MARITA J.M., HATFIELD R.D., RALPH S.A., CHRISTENSEN J.H., BOERJAN W., 2004, Lignins: Natural polymers from oxidative coupling of 4-hydroxophenylpropanoids. Phytochemistry Reviews, 3, 29–60.
• ROY S., DIXIT C.K., WOOLLEY R., McCRAITH B.D., O’KENNEDY R., McDONAGH C., 2010, Novel multiparametric approach to elucidate the surface amine-silanization reaction profile on fluorescent silica nanoparticles. Langmuir, 26, 18125–18134.
• STÖBER W., FINK A., BOHN E., 1968, Controlled growth of monodisperse silica spheres in the micron size range. Journal of Colloid and Interface Science, 26, 62–69.
• SZWARC-RZEPKA K., CIESIELCZYK F., JESIONOWSKI T., 2013, Preparation and physicochemical properties of functionalized silica/octamethacryl-silsesquioxane hybrid systems. Journal of Nanomaterials, Article ID 674237, 1–15.
• TEJADO A., PENA C., LABIDI J., ECHEVERRIA J.M., MONDRAGON I., 2007, Physico-chemical characterization of lignin from different sources for use in phenol-formaldehyde resin synthesis. Bioresource Technology, 98, 1655–1663.
• TELYSHEVA G., DIZHBITE T., EVTUGUIN D., MIRONOVA-ULMANE N., LEBEDEVA G., ANDERSONE A., BIKOVENS O., CHIRKOVA J., BELKOVA L., 2009, Design of siliceous lignins – novel organic/inorganic hybrid sorbent materials. Scripta Materialia, 60, 687–690.
• TERTYKH V.A., YANISHPOLSKII V.V., BOL’BUKH Y., 2003, Synthesis and characterization of functional chemically modified silica fillers. Macromolecular Symposia, 194, 141–146.
• TERTYKH V.A., IVASHCHENKO N.A., YANISHPOLSKII V.V., KHAINAKOV S.A., 2013, Platinum nanoparticles on the surface of silica modified with silicon hydride groups. Materials Science & Engineering Technology, 44, 239–243.
• VANHOLME R., DEMEDTS B., MORREEL K., RALPH J., BOERJAN W., 2010, Lignin biosynthesis and structure. Plant Physiology, 153, 895–905.
• WYPYCH G., 2010, Handbook of Fillers, ChemTec Publishing, Toronto.
• ZAKZESKI J., JONGERIUS A.L., WECKHUYSEN B.M., 2010, Transition metal catalysed oxidation of Alcell lignin, soda lignin, and lignin model compounds in ionic liquid. Green Chemistry, 12, 1225–1236.
• ZAKZESKI J., BRUIJNINEX P.C.A., WECKHUYSEN B.M., 2011, In situ spectroscopic investigation of the cobalt-catalyzed oxidation of lignin model compounds in ionic liquids. Green Chemistry, 13, 671–680.
• ZURAWSKA J., KRYSZTAFKIEWICZ A., JESIONOWSKI T., 2003, Active silicas obtained by precipitation from mixtures of sodium metasilicate and ammonium chloride solutions. Journal of Chemical Technology and Biotechnology, 78, 534–541.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.