PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Recovery of copper and nickel from polymetallic sulphate leach solution of printed circuit boards using Dowex M 4195

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Sulphuric acid leach solution of waste printed circuit boards (PCBs) contains predominantly copper and iron with later remain problematic during electrowinning of the formal. In this study, performance of Dowex M 4195 resin for recovery of copper and nickel from polymetallic sulphate leach solution of waste PCBs was investigated by batch experiments. It was observed that at pH 0.5, about 45.2 and 3.6 % Cu2+ and Ni2+ was selectively recovered respectively. Recovery efficiency of Ni2+ increased with increase in pH from 0.5 -5.0 while pH2 was optimum for the recovery of Cu2+. Sharp increase in co-recovery of Fe3+/Fe2+ was observed at pH above 2 with that of Zn2+ and Co2+ became low due to hindrance from binding site by high concentration of Cu2+. Adsorption data obtained for Cu2+ and Ni2+ were tested with adsorption isotherms as well as kinetics. It is shown that adsorption of Cu2+ and Ni2+was well fitted to both Langmuir and Freundlich isotherm. Kinetics of Cu2+ and Ni2+ fitted into Pseudo-first and well fitted to second order. Reuse studies shows that the resin strong affinities for Cu2+ and Ni2+ remain unchanged.
Słowa kluczowe
Rocznik
Strony
1156--1164
Opis fizyczny
Bibliogr. 32 poz., rys., tab., wykr., wz.
Twórcy
  • CSIR-Institute of Minerals and Materials Technology, Bhubaneswar 751013, India
  • Department of Chemistry, Federal University of Technology, Akure, Nigeria
  • Department of Chemistry, Federal University of Technology, Akure, Nigeria
  • Department of Chemistry, Federal University of Technology, Akure, Nigeria
  • Department of Chemistry, Federal University of Technology, Akure, Nigeria
Bibliografia
  • ALYIIZ, B., VELI, S., 2009. Kinetics and equilibrium studies for the removal of nickel and zinc from aqueous solutions by ion exchange resins. Journal of Hazardous Materials 167 (2009) 482-488.
  • BALDÉ, C.P., FORTI V., GRAY, V., KUEHR, R., STEGMANN, P., 2017. The Global E-waste Monitor – 2017. United Nations University (UNU), International Telecommunication Union (ITU) & International Solid Waste Association (ISWA), Bonn/Geneva/Vienna.
  • CUI, J., ZHANG, L., 2008. Metallurgical recovery of metals from electronic waste: A review. Journal of Hazardous Materials 158 (2-3), 228–256, 2008.
  • DAS, S.C., GOPALA, P., KRISHNA, D., 1996. Effect of Fe3+ during copper electrowinning at higher current density. International Journal of Mineral Processing, 91-105.
  • DINIZ, C., DOYLE, F., AND CIMINELLI, V., 2002. Effect of pH on the adsorption of selected heavy metal ions from concentrated chloride solutions by chelating resin Dowex M 4195. Separation and Technology, 37, 3169-3185.
  • DINIZ, C.V., CIMINELLI, V.S.T., DOYLE, F.M., 2005. The use of the chelating resin Dowex M-4195 in the adsorption of selected heavy metals ions from manganese solutions. Hydrometallurgy 78 (2005) 147-155.
  • EDEBALI, S., PEHLIVAN, E., 2016. Evaluation of chelate and cation exchange resins to remove copper ion. Powder technology 301 (2016), 520 -525.
  • FU. F., WANG, Q., 2011. Removal of heavy metals ion from wastewater: A Review. Journal of Environmental Waste Management, 92(2011), 407-418.
  • GODE, F., PEHLIVAN, E., 2005. Adsorption of Cr (III) ions by Turkish brown coals. Fuel Process Technology. 86, 2005, 875-884.
  • GRIMSHAW, R.W., HARLAND, C.E., 1975. Ion Exchange: Introduction to Theory and Practice. Chemical Society, London, p.3.
  • GRINSTEAD, R. 1984. Selective absorption of copper, nickel, cobalt and other transition metal ions from sulphuric acid solutions with the chelating ion exchange resin Dow XFS 4195. Hydrometallurgy, 12, 387-400.
  • GUPTA, V.K., SHARMA, S, 2003. Removal of zinc from aqueous solutions using bagasse fly-ash-a low cost adsorbent. Industrial Engineering and Chemical Resources, 42 (2003) 6619-6624.
  • HIRAYAMA, N., UMEHARA, W. 1996. Novel separation of inorganic anions using a charged complex ion-exchanger. Analytica Chimica Acta, Vol. 334, pp. 1-4
  • HOFFMANN, J.E., 1992. Recovering precious metals from electronic scraps. Journal of Minerals, Metals and Materials Society, 44 (7), 43–48, 1992.
  • HO, Y.S., MCKAY, G., 1998. Sorption of dye from aqueous solution by peat. Journal of Chemical Engineering 70 (1998) 115-124.
  • HO, Y.S., 2005. Effect of pH on the lead removal from water using tree fern as the sorbent. Bioresources technology, 96: 1292-1296.
  • JOULIE, M., LAUCOURNET, R., BILLY, E., 2014. Hydrometallurgical process for the recovery of high value metals from spent lithium nickel cobalt aluminium oxide based lithium-ion batteries. Journal of power sources, 247 (2014) 551-555.
  • KHOLMOGOROV, A.G., KONONOVA, O.N., PATRUSHEV, V.V., MIKHLINA, E.V., KONONOV, Y.S., PASHKOV, G.L., 1997. Ion exchange purification of manganese sulphate solutions from cobalt. Hydrometallurgy 45 (1997) 261-269.
  • KONONOVA, O.N., KHOLMOGOROV, A.G., KACHIN, S.V., MYTYKH, O.V., KONONOV, Y.S., KALYAKINA, O.P., PASHKOV, G.L. (2000) Ion exchange recovery of nickel from manganese nitrate solutions. Hydrometallurgy, 54, pp. 107-115.
  • LEE, J.C., SONG, H.T., YOO, J.-M., 2007. Present status of the recycling of waste electrical and electronic equipment in Korea. Resources Conservative and Recycling 50 (4), 380–397, 2007.
  • LEINONEN, H., LEHTO, J., MA ̈KELA ̈, A., 1994. Purification of nickel and zinc from waste waters of metal-plating plants by ion exchange. Reactive Polymers 23, 221–228.
  • MENDES, F.D., MARTINS, A.H., 2005. Recovery of nickel and cobalt from acid leach pulp by on exchange using chelating resin. Mineral Engineering 18 (2005), 945-954.
  • NGUYEN, N.V., LEE, J., JHA, M.K., YOO, K., JEONG, J., 2009. Copper recovery from low concentration waste solution using Dowex G-26 resin. Hydrometallurgy 97 (2009) 237-242.
  • NIKOLOSHI, A.N., ANG, K.L., 2014. Review of the application of ion exchange resins for the recovery of platinum-group metals from hydrochloric acid solutions. Mineral Processing and Extractive Metallurgy. Rev. 35 (6), 369-389.
  • OGDEN, M.D., MOON, E.M., WILSON, A., PEPPER, S.E., 2017. Application of chelating weak base resin Dowex M4195 for the recovery of Uranium from mixed sulphate/chloride media. Chemical Engineering Journal (2017), doi.org/10.1016/j.cej.2017.02.041.
  • OISHI, T., KOYAMA, K., TANAKA, M., LEE, J,-C., 2007. Recovery of high purity copper cathode from printed circuit boards using ammoniacal sulphate or chloride solutions. Hydrometallurgy 89, 82-88.
  • QUINET, P., PROOST, J., VAN LIERDE, A., 2005. Recovery of precious metals from electronic scrap by hydrometallurgical processing routes. Mineral and Metallurgy Process. 22 (1) (2005) 17–22.
  • RENGARAJ, S., JOO, C.K., KIM, Y., YI, J., 2003. Kinetics of removal of chromium from water and electronic proces wastewater by ion exchange resins: 1200H, 1500H and IRN97H. Journal of Hazardous Materials B102 (2003) 257–275.
  • SHARMA, A., BHATTACHARYYA, K.G., 2004. Adsorption of Chromium (VI) on Azadirachta Indica (Neem) leaf powder. Adsorption 10 (2004) 327-338.
  • SIROLA, K., LAATIKANEN, M., AND PAATERO, E., 2010a. Effect of temperature on sorption of metals by silica supported 2-(aminomethyl)pyridine.Part I: Binding equilibria, Reactivity and functional polymers. 70, 48-55.
  • SUM, E.Y.L., 1991. The recovery of metals from electronic scrap. Journal of Minerals Metals and Materials Society, 43(4), 53–61, 1991.
  • ZAINOL, Z., NICOL, M.J., 2009. Ion-exchange equilibria of Ni2+, Co2+, Mn2+ and Mg2+ with iminodiacetic acid chelating resin, Amberlite IRC 748. Hydrometallurgy 99 (3-4), 175-180.
Uwagi
Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-3a5b1b95-e658-4d69-8fb6-46a4d41c8d3f
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.