Influence of total inertia effects in a thrust curvilinear bearing lubricated with Newtonian lubricants

• Autorzy: Walicka A. , Jurczak P.

Identyfikatory

DOI

10.1515/ijame-2017-0067

• Języki publikacji: EN

Abstrakty

EN

In the paper, the flow of a Newtonian type of lubricant in the clearance of a curvilinear bearing is considered. It is assumed that the bearing walls are modelled as smooth and impermeable. In analytical considerations, full inertia of the longitudinal flow and partial inertia of the circumferential flow are taken into account. The equation of motion of the lubricant is solved by the modified method of averaged inertia. A thrust bearing and spherical bearing are considered, for which dimensionless pressure distributions and the bearing capacity are given.

Słowa kluczowe

EN

inertia; modified Reynolds equation; pressure distribution; load-capacity

PL

bezwładność; równanie Reynoldsa; rozkład ciśnienia; nośność

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2017
• Tom: Vol. 22, no. 4
• Strony: 1045--1058
• Opis fizyczny: Bibliogr. 13 poz., rys., wykr.

Twórcy

autor

Walicka A.

• University of Zielona Góra, Faculty of Mechanical Engineering ul. Szafrana 4, 65-516 Zielona Góra, POLAND

autor

Jurczak P.

• University of Zielona Góra, Faculty of Mechanical Engineering ul. Szafrana 4, 65-516 Zielona Góra, POLAND

Bibliografia

• [1] Agrawal V.K. (1970): Effect of lubricant inertia on squeeze film in spherical bearing. – Jap. J. Appl. Phys., vol.9, No.7, pp.831-833.
• [2] Gould F. (1975): High-pressure spherical squeeze films. – J. Lubric. Technol. Trans. ASME, ser. F, vol.97, No.1, pp.207-208.
• [3] Murti P.R.K. (1975): Squeeze film in curved circular plates. – J. Lubric. Technol. Trans. AME, ser F, vol.97, No.4, pp.650-654.
• [4] Vora K.H. (1980): Behaviour of squeeze film between curved circular plates with a concentric circular pocket. – Wear, vol.65, pp.35-38.
• [5] Walicka A. (1993): Averaged inertia method for the flow of viscous fluid in a slot between fixed surfaces of revolution. – Sci.Rep. TU of Zielona Gora, no.18, pp.153-163.
• [6] Möller U.J. and Boor U. (1996): Lubricants in Operations. – Dűseldorf: VDI Verlag.
• [7] Myshkin N.K., Kim C.K. and Petrokovets M.I. (1997): Introduction to Tribology. – Seoul, Cheong Moon Gak.
• [8] Myshkin N.K. and Petrokovets M.I. (2002): Tribology. Principles and Applications (in Russian). – Gomel, IMMS NANB.
• [9] Szeri A.Z. (1998): Fluid Film Lubrication. Theory and Design. – Cambridge University Press.
• [10] Walicka A. and Walicki E. (2002): Surface roughness effect on the pressure distribution in curvilinear thrust bearings. – Exploitation Problems of Machines, vol.131, No.3, pp.157-167.
• [11] Walicki E. (2005): Rheodynamics of Slide Bearings Lubrication (in Polish). – Zielona Góra: University Press.
• [12] Walicka A. (2017): Rheology of Fluids in Mechanical Engineering. – Zielona Góra: University Press.
• [13] Walicka A., Wojnarowski J. (2010): Inertia effects in a curvilinear thrust hydrostatic bearing. – Int. J. Appl. Mech. Engng, vol.15, No.3, pp.909-920.