Synthesis and study of structural properties of Sn doped ZnO nanoparticles

• Autorzy: Javid M. A. , Rafi M. , Ali I. , Hussain F. , Imran M. , Nasir A.

Identyfikatory

DOI

10.1515/msp-2016-0109

• Języki publikacji: EN

Abstrakty

EN

Pure and Sn-doped ZnO nanostructures were synthesized by simple chemical solution method. In this method we used zinc nitrate and NaOH as precursors. Sn doping content in ZnO was taken with the ratio 0, 5, 10, 15 and 20 percent by weight. Physical properties of Sn-doped ZnO powder were studied by XRD analysis which revealed that Sn doping had a significant effect on crystalline quality, grain size, intensity, dislocation density and strain. The calculated average grain size of pure ZnO was 21 nm. The best crystalline structure was found for 0 wt.%, 5 wt.% and 10 wt.% Sn doping as observed by FESEM and XRD. However, higher Sn-doping (> 10 wt.%) degraded the crystallinity and the grain size of 27.67 nm to 17.76 nm. The structures observed in FESEM images of the samples surfaces were irregular and non-homogeneous. EDX depicted no extra peak of impurity and confirmed good quality of the samples.

Słowa kluczowe

EN

nanoparticles; chemical solution method; physical properties; XRD analysis

• Wydawca: De Gruyter
• Czasopismo: Materials Science Poland
• Rocznik: 2016
• Tom: Vol. 34, No. 4
• Strony: 741--746
• Opis fizyczny: Bibliogr. 34 poz., rys., tab.

Twórcy

autor

Javid M. A.

• Department of Basic Sciences (Physics), University of Engineering & Technology, Taxila, Pakistan

autor

Rafi M.

• Department of Basic Sciences (Physics), University of Engineering & Technology, Taxila, Pakistan

autor

Ali I.

• Government Municipal Postgraduate College, Toba Tek Singh, Pakistan

autor

Hussain F.

• Department of Physics, Bahudin Zikria University, Multan, Pakistan

autor

Imran M.

• Department of Physics, Bahudin Zikria University, Multan, Pakistan

autor

Nasir A.

• Department of Mechanical Engineering, UET, Taxila, Pakistan

Bibliografia

• [1] LI G., HU G.G., ZHOU H.D., FAN X.J., LI X.G., Mater. Chem. Phys., 75 (2002), 101.
• [2] MIURA K., MASUDA M., ITOH M., HORIKAWA T., MACHIDA K.I., J. Alloy. Compd., 408 (2006), 1391.
• [3] HUANG S., WANG L., LIU L., HOU Y., LI L., Agron. Sustain. Dev., 35 (2015), 369.
• [4] GONCHAR A., GORELIK S., KATYNKINA S., LETYUK L., RYABOV I., J. Magn. Magn. Mater., 215 (2000), 221.
• [5] HUANG J., ZHUANG H., LI, W., Mater. Res. Bull., 38 (2003), 149.
• [6] PEREIRA F.M.M., SANTOS M.R.P., SOHN R.S., ALMEIDA J.S., MEDEIROS A.M.L., J. Mater. Sci.- Mater. El., 20 (2009), 408.
• [7] CHO H.S., KIM S.S., IEEE T. Magn., 35 (1999), 3151.
• [8] NEDKOV I., PETKOV A., KARPOV V., IEEE T. Magn., 26 (1990), 1483.
• [9] SHEN G., XU M., XU Z., Mater. Chem. Phys., 105 (2007), 268.
• [10] SUGIMOTO S., HAGA K., KAGOTANI T., INOMATA K., J. Magn. Magn. Mater., 290 (2005), 1188.
• [11] ALI I., ISLAM M.U., AWAN M.S., AHMAD M., J. Alloy. Compd., 547 (2013), 118.
• [12] BATOO K.M., KUMAR S., LEE C.G., Curr. Appl. Phys., 9 (2009), 826.
• [13] PIRES G.F.M., RODRIGUES H.O., ALMEIDA J.S., SANCHO E.O., GOES J.C., COSTA M.M., DENARDIN J.C., SOMBRA, A.S.B., J. Alloy. Compd., 493 (2010), 326.
• [14] FISTER M.J., DE GEUS A., RHINES W.C., HU J., CASSIDY R., IEEE T. Nucl. Sci., 43 (1996), 2874.
• [15] KOOPS C.G., Phys. Rev., 83 (1951), 121.
• [16] REDDY M.B., REDDY P.V., J. Appl. Phys., 75 (1994), 6125.
• [17] WATAWE S.C., SARWADE B.D., BELLAD S.S., SUTAR B.D., CHOUGULE B.K., J. Magn. Magn. Mater., 214 (2000), 55.
• [18] TSAKALOUDI V., KOGIAS G., ZASPALIS V.T., J. Alloy. Compd., 588 (2014), 222.
• [19] REZLESCU N., REZLESCU E., Phys. Status Solidi A, 23 (1974), 575.
• [20] PILLAI P.K.C., Polymeric Electrets, Plastics Engineering, New York, 1995.
• [21] OUNNUNKAD S., WINOTAI P., J. Magn. Magn. Mater., 301 (2006), 292.
• [22] BSOUL I., MAHMOOD S.H., J. Alloy. Compd., 489 (2010), 110.
• [23] LECHEVALLIER L., LE J.M., BRETON J.F., HARRIS I.R., J. Magn. Magn. Mater., 269 (2004), 192.
• [24] LEE S.W., AN S.Y., SHIM I.B., KIM C.S., J. Magn. Magn. Mater., 290 (2005), 231.
• [25] IQBAL M.J., ASHIQ M.N., GUL I.H., J. Magn. Magn. Mater., 322 (2010), 1720.
• [26] EL ATA A.A., REICHA F.M., ALI M.M., J. Magn. Magn. Mater., 292 (2005), 17.
• [27] SAWADH P.S., KULKARNI D.K., B. Mater. Sci., 24 (2001), 47.
• [28] JIA L., LUO J., ZHANG H., XUE G., JING Y., J. Alloy. Compd., 489 (2010), 162.
• [29] KUMAR M.P, SHANKARAPPA T., KUMAR B.V., NAGARAJA N., Solid State Sci., 11 (2009), 214.
• [30] IQBAL M.J., ASHIQ M.N., Chem. Eng. J., 136 (2008), 383.
• [31] BAHSI Z.B., ORAL A.Y., Opt. Mater., 29 (2007), 672.
• [32] MOTT N.F., DAVIS E.A., Electronic Processes in NonCrystalline Materials, Clarendon Press, London, 1979.
• [33] PRAKASH T., JAYAPRAKASH R., ESPRO C., NERI G.,KUMAR E.R.,, J. Mater. Sci., 49 (2014), 1776.
• [34] SIRDESHMUKH L., KUMAR K.K., LAXMAN S.B., KRISHNA A.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).