PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Methodics of assessing environmental noise emission while performing hydraulic fracturing operations in shale formations

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Hydraulic fracturing operations performed at the stage of gas prospection in shale formations are aimed at opening out gas residing in rock micropores. Large quantities of fracturing fluid, with physicochemical composition adjusted to their properties, are injected to the selected interval of a horizontal well. Finally, sand (proppant) is injected along with the fracturing fluid to support the newly formed fracture. The results of a computer simulation of noise emission generated by high pressure pumps during hydraulic fracturing operations, and the results of noise measurements during such work in the north of Poland are presented in the paper. The analysis of the obtained results revealed that the noise standards for day hours in the residential area localized ca. 320 m from the well pad was not exceeded for the hydraulic fracturing operations. The noise level in the night hours was considerably higher, therefore a respective sound berm should be construed.
Rocznik
Strony
769--780
Opis fizyczny
Bibliogr. 12 poz., rys., tab.
Twórcy
  • AGH University of Science and Technology, Faculty of Drilling, Oil and Gas, Krakow, Poland
autor
  • AGH University of Science and Technology, Faculty of Drilling, Oil and Gas, Krakow, Poland
Bibliografia
  • [1] EIA: Assessment of risk from Unconventional Gas Well Development in the Marcellus Shale of Western Maryland. January 20, 2015.
  • [2] EIA: Technically Recoverable Shale Oil and Shale Gas Resources: An Assessment of 137 Shale Formations in 41 Countries Outside the United States, Washington D.C.2013. http://www.eia.gov/analysis/studies/worldshalegas/pdf/overview.pdf.
  • [3] Environmental Impacts of Fracking Related to Exploration and Exploitation of Unconventional Natural Gas Deposits. Risk Assessment, Recommendations for Action and Evaluation of Relevant Existing Legal Provisions and Administrative Structures. Dessau-Roßlau, September 2013.
  • [4] https://www.umweltbundesamt.de/sites/default/fi les/medien/378/publikationen/texte.
  • [5] Instrukcja ITB nr 338/2003. Metoda określania emisji i imisji hałasu przemysłowego w środowisku ITB. Warszawa 2003.
  • [6] Macuda J.: Środowiskowe aspekty produkcji gazu ziemnego z niekonwencjonalnych złóż. Przegląd Geologiczny, t. 58, nr 3, 2010.
  • [7] Polska Norma PN-ISO 1996-1: Akustyka. Opis i pomiary hałasu środowiskowego. Podstawowe wielkości i procedury, marzec 1999.
  • [8] Polska Norma PN-ISO 1996-2: Akustyka. Opis i pomiary hałasu środowiskowego. Podstawowe wielkości i procedury, marzec 1999.
  • [9] Polska Norma PN-ISO 1996-3: Akustyka. Opis i pomiary hałasu środowiskowego. Podstawowe wielkości i procedury, marzec 1999.
  • [10] Polska Norma PN-ISO 1913-2: Akustyka. Tłumienie dźwięku podczas propagacji w przestrzeni otwartej. Ogólna metoda obliczeniowa, wrzesień 2002.
  • [11] Rozporządzenie Ministra Środowiska z dnia 14 czerwca 2007 r. w sprawie dopuszczalnych poziomów hałasu w środowisku. Dz.U. 2007, nr 120, poz. 826.
  • [12] Rozporządzenie Ministra Środowiska z dnia 30 października 2014 r. w sprawie wymagań w zakresie prowadzenia pomiarów wielkości emisji oraz pomiarów ilości pobieranej wody. Dz.U. 2014, nr 2, poz. 1542.
Uwagi
EN
The work performed within AGH-UST statutory research program no. 11.11.190.555.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-3990b229-f407-400b-b4aa-5fc97999af1b
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.