Geometrical structure of surface after turning of 316L stainless steel in laser assisted conditions

• Autorzy: Szymański Michał , Kukliński Mateusz

Identyfikatory

DOI

10.2478/amtm-2019-0012

• Języki publikacji: EN

Abstrakty

EN

The effects of turning 316L steel in a laser assisted machining are presented in this paper. The properties of 316L stainless steel are also shown in this article. In order to show correlation between the technological parameters, microgeometry of cutting tools and geometrical structure of surface, turning of material in grade 316L supported by laser has been executed. In addition, optical examination of cutting inserts has been performed and geometrical measurements of machined surfaces have been taken. The results of researches on the effects of the technological parameters and cutting tool's microgeometry on the geometrical structure of the 316L steel surface after turning in LAM conditions are described.

Słowa kluczowe

EN

surface roughness measurement; 316L stainless steel; turning; LAM

• Wydawca: Wydawnictwo Politechniki Poznańskiej
• Czasopismo: Archives of Mechanical Technology and Materials
• Rocznik: 2019
• Tom: Vol. 39
• Strony: 66--73
• Opis fizyczny: BIbliogr. 11 poz., rys., tab.

Twórcy

autor

Szymański Michał

• Poznań University of Technology, Faculty of Mechanical Engineering and Management, Institute of Mechanical Technology, Piotrowo 3, 60-965 Poznań, Poland

autor

Kukliński Mateusz

• Poznań University of Technology, Faculty of Mechanical Engineering and Management, Institute of Mechanical Technology, Piotrowo 3, 60-965 Poznań, Poland

Bibliografia

• [1] ASM International, AK Steel 316L, ASM International, Ohio 2003.
• [2] Blicharski M., Inżynieria materiałowa. Wydanie czwarte zmienione, Wydawnictwa Naukowo - Techniczne, Warszawa 2003, 2012 324 - 326.
• [3] Ҫelik G. A., Polat Ş., Atapek H., Haidemenopoulos G. N., Microstructural and Mechanical Characterization of Solidified Austenitic Stainless Steels, Archives of Foundary Engineering, Vol. 17 (3), (2017).
• [4] Dobrzański L. A. (red.), Zasady doboru materiałów inżynierskich z kartami charakterystyk. Wydanie II zmienione i uzupełnione, Wydawnictwo Politechniki Śląskiej, Gliwice 2001.
• [5] Grądzka-Dahlke M., Analiza procesów zachodzących podczas ściskania porowatej stali 316L do zastosowań biomedycznych, Eksploatacja i niezawodność, Nr 4/2010.
• [6] Jankowiak M., Przestacki D., Nowak I., Effect of CO2 laser beam applied during machining of SiC particle reinforced aluminium matrix composites, 5th International PhD Conference on Mechanical Engineering - PhD2007, September 6-8, 2007, Pilsen - Czech Republic.
• [7] Kawalec M., Jankowiak M., Nowakowski Z., Twardowski P., Rybicki M., Hard machining of steel and technical ceramics, 1st Jubilee Scientific Conference "Manufacturing Engineering in Time of Information Society”, Gdańsk, 1st - 2nd June 2006, Department of Manufacturing Engineering and Automation, Gdansk University of Technology.
• [8] Köhnen P., Haase C., Bültmann J., Ziegler S., Schleifenbaum J. H., Bleck W., Mechanical properties and deformation behaVior of additively manufactured lattice structures of stainless steel, Materials and Design 145 (2018) 205 - 217.
• [9] Kotan H., Microstructural evolution of 316L stainless steels with yttrium addition after mechanical milling and heat treatment, Materials Science & Engineering A 647 (2015) 136 - 143.
• [10] Merchant M. E., Basic mechanics of the metal cutting process, Journal of Applied Mechanics Transactions of the American Society of Mechanical Engineers (1944) 66:168.
• [11] Szablewski P., Weiss E., Chwalczuk T., Rozwój obróbki materiałów trudnoskrawalnych, Mechanik, Nr 8-9/2016.