Experimental research on influence of gas impact on thermal and mechanical properties of auxetic material covered with titanium silicide coating

• Autorzy: Miedzińska D. , Gieleta R. , Małek E. , Zasada D. , Stankiewicz M. , Marszałek K.

Identyfikatory

DOI

10.24425/119071

• Języki publikacji: EN

Abstrakty

EN

The aim of the presented work was to study the auxetic textiles covered with titanium silicide coating. The research was carried out to develop the material structure, which will be used for protective clothing, e.g. for firemen. The new material should be characterized by increased heat resistance coupled with protection against gas pressure impact caused e.g. by gas installation damage. In the paper, an assessment of the change in heat resistance properties of a Ti-Si coated auxetic textile loaded with gas pressure impulse was carried out.

Słowa kluczowe

EN

Ti-Si layers; damage; impact; thermal resistance; SEM; auxetic materials

PL

Ti-Si; uszkodzenia; uderzenia; opór cieplny; SEM; materiały auksetyczne

• Wydawca: Polska Akademia Nauk, Wydział IV Nauk Technicznych
• Czasopismo: Bulletin of the Polish Academy of Sciences. Technical Sciences
• Rocznik: 2018
• Tom: Vol. 66, nr 2
• Strony: 165--172
• Opis fizyczny: Bibliogr. 9 poz., rys., wykr., tab.

Twórcy

autor

Miedzińska D.

• Military University of Technology, Faculty of Mechanical Engineering, 2 Urbanowicza St., 00-908, Warsaw, Poland

autor

Gieleta R.

• Military University of Technology, Faculty of Mechanical Engineering, 2 Urbanowicza St., 00-908, Warsaw, Poland

autor

Małek E.

• Military University of Technology, Faculty of Mechanical Engineering, 2 Urbanowicza St., 00-908, Warsaw, Poland

autor

Zasada D.

• Military University of Technology, Faculty of Advanced Technologies and Chemistry, 2 Urbanowicza St., 00-908, Warsaw, Poland

autor

Stankiewicz M.

• Military University of Technology, Faculty of Mechanical Engineering, 2 Urbanowicza St., 00-908, Warsaw, Poland

autor

Marszałek K.

• AGH University of Science and Technology, Faculty of Computer Science, Electronics and Telecommunications, 30 Mickiewicza St., 30-059 Cracow, Poland

Bibliografia

• [1] J.R. Wright, K.E. Evans, and M.K. Burns, “Auxetic Blast Protection Textiles – Crime Feasibility Study”, Final Report – EP/D036690/1, University of Exeter, Exeter (2007).
• [2] J.R. Wright, M.K. Burns, E. James, M.R. Sloan, and K.E. Evans, “On the design and characterisation of low-stiffness auxetic yarns and fabrics”, Textile Research Journal, 82 (7) 645–654 (2012).
• [3] K.E. Evans, M.R. Sloan, and J. Wright, “Creating Bomb-proof Curtains.” http://www.thenakedscientists.com/HTML/interviews/interview/1350/ (2010).
• [4] P.B. Hook, “Uses of Auxetic Fibres” USA Patent US 8,002,879 B2 (2011).
• [5] C. Dong, Z. Chu, and Q. Zhang, “Analysis of several test methods about heat insulation capabilities of ceramic thermal barrier coatings” Physics Procedia, 50 248‒252 (2013).
• [6] D. Derlukiewicz, “Method of modelling the thermoelastic effects in laminar ceramic coatings”, Wroclaw University of Science and Technology, Wroclaw (2006).
• [7] N. Domingo, “Heat Transfer Effectiveness of a Thermal Barrier Coating With Different Fuel Compositions”. Oak Ridge National Laboratory, Tennessee (1991).
• [8] K.J. An, “Assessment of the Thermal Conductivity of Yttria-Stabilized Zirconia Coating.” Materials Transactions, 55 (1) 188‒193 (2014).
• [9] R. Ghasemi, R. Shoja-Razavi, R. Mozafarinia, and H. Jamali, “Laser glazing of plasma-sprayed nanostructured yttria stabilized zirconia thermal bather coatings.” Ceramics International, 39 (8) 9483–9490 (2013).

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).