Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
The paper examines from the thermodynamic point of view operation of coal fired power unit cooperating with the cryogenic oxygen unit, with a particular emphasis on the characteristic performance parameters of the oxygen unit. The relatively high purity technical oxygen produced in the oxygen unit is then used as the oxidant in the fluidized bed boiler of the modern coal fired power unit with electric power output of approximately 460 MW. The analyzed oxygen unit has a classical two-column structure with an expansion turbine (turboexpander), which allows the use of relatively low pressure initially compressed air. Multivariant calculations were performed, the main result being the loss of power and efficiency of the unit due to the need to ensure adequate driving power to the compressor system of the oxygen generating plant.
Czasopismo
Rocznik
Tom
Strony
39--54
Opis fizyczny
Bibliogr. 13 poz., rys., wykr.
Twórcy
autor
- Opole University of Technology, Institute of Innovation Processes and Products, Prószkowska 76, 45-758 Opole, Poland
autor
- Silesian University of Technology, Institute of Thermal Technology, Konarskiego 22, 44-100 Gliwice, Poland
Bibliografia
- [1] Chorowski M.: Cryogenics. Fundamentals and Applications. IPPU Masta, 2007 (in Polish).
- [2] Cornelissen R.I., Hirs G.G.: Energy analysis of cryogenic air separation. Energy Convers. Mgmt 39(1998), 16-18, 1821–1826.
- [3] Smith A.R., Klosek J.: A review of air separation technologies and their integration with energy conversion process. Fuel Process. Technol. 70(2001), 115–134.
- [4] Kotowicz J., Dryjańska A.: Supercritical power plant 600 MW with cryogenic oxygen plant and CCS installation. Arch. Thermodyn. 34(2013), 3, 123–136.
- [5] Pham J., Lethier S., Marcano N., Recourt P.: Operating Experience and Performance Characteristics of a Gas-Oxy Combustion Technology at Total’s Carbon Capture and Storage Demonstration Plant. Power-Gen International, Orlando, Florida, Dec. 11–13, 2012.
- [6] Said A., Laukkanen T., Fogelholm C.-J.: Process modelling of eight oxyfuel combustion configurations with Aspen Plus. Proc. Int. Conf. on Carbon Reduction Technologies CaReTech2011, 19-22 Sept. 2011.
- [7] Hu Y., Naito S., Kobayashi N., Hasatani M.: CO2, NOX and SO2 emissions from the combustion of coal with high oxygen concentration gases. Fuel 79(2000), 1925–1932.
- [8] Kimura N., Omata K., Kiga T., Takano S., Shikisima S.: The characteristics of pulverized coal combustion in O2/CO2 mixtures for CO2 recovery. Energ. Convers. Manage. 36(1995), 6–9, 805–808.
- [9] Chorowski M.: Air separation units in oxyfuel combustion. Proc. the Sympozjum „Technologie zeroemisyjne – spalane tlenowe”, Częstochowa 2008 (in Polish).
- [10] Minkina M.: Thermodynamic analysis of the cryogenic plant to produce oxygen. MSc thesis, Silesian University of Technology, Gliwice 2011 (in Polish).
- [11] Hnydiuk-Stefan A.: Analysis of operating parameters of coal-fired power plant with oxyfuel combustion. PhD thesis, Opole Technical University, Opole 2014 (in Polish).
- [12] http://www.fchart.com/ees/ (Accessed on 10 March 2015).
- [13] http://www.aspentech.com/products/aspen-plus.aspx (Accessed on 10 March 2015).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-3828ee21-c173-471a-964d-e0931720de07