Error Types at Parallel Kinematics Machine Tools

• Autorzy: Pandilov Z. , Gecevska V.
• Języki publikacji: EN

Abstrakty

EN

Theoretically parallel kinematics machine tools should be very accurate and rigid due to their closed loop structure and no error accumulation characteristics. Unfortunately, these theoretical presumptions have not been confirmed in practice. This paper gives a survey of the types of errors which significantly decrees the expected accuracy of the parallel kinematics machine tools.

Słowa kluczowe

EN

parallel kinematics; machine tools; errors; accuracy

• Wydawca: Wydawnictwo Wrocławskiej Rady FSNT NOT
• Czasopismo: Journal of Machine Engineering
• Rocznik: 2007
• Tom: Vol. 7, No. 1
• Strony: 72--79
• Opis fizyczny: Bibliogr. 10 poz., rys.

Twórcy

autor

Pandilov Z.

• University "Sv. Kiril i Metodij"-Skopje, Faculty of Mechanical Engineering, Karpos II b.b., P.O.Box 464, MK-1000, Skopje, Republic of MACEDONIA

autor

Gecevska V.

• University "Sv. Kiril i Metodij"-Skopje, Faculty of Mechanical Engineering, Karpos II b.b., P.O.Box 464, MK-1000, Skopje, Republic of MACEDONIA

Bibliografia

• [1] EASTWOOD, S., WEBB, P., Error Mapping, Modelling and Compensation for Hybrid Parallel Kinematic Machines, 4th Chemnitz Parallel Kinematics Seminar, PKS 2004, Chemnitz, 2004, pp. 653-667.
• [2] HEISEL U., Precision requirements of Hexapod- Machines and Investigation Results, Proceedings of the First European-American Forum on Parallel Kinematic Machines, 31.08.-01.09.1998, Milano, Itally, pp.131-150.
• [3] HSU W.-Y., CHEN J.-S., Error analysis and auto-calibration for a Cartesian-guided tripod machine tool, Int. J. Adv. Manuf. Technol. (2004) 24: pp. 899-909.
• [4] IBARAKI S., OKUDA T., KAKINO Y., NAKAGAWA M., MATSUSHITA T., ANDO T.. Compensation of Gravity-Induced Errors on a Hexapod-Type Parallel Kinematic Machine Tool, .1SME International Journal Series C, Vol. 47 (2004) , No. 1 Special Issue on Advanced Manufacturing Technology, pp. 160-167.
• [5] KRUTH J.-P., VANHERCK P.,. VAN DEN BERGH C., Compensation of Static and Transient Thermal Errors on CMMs, Annals of C1RP, 50/1/2001, pp.377-384.
• [6] OIWA T., Study on Accuracy Improvement of Parallel Kinematic Machine (Compensation Methods for Thermal Expansion of Link and Machine Frame), Proceedings of the 1st Korea-Japan Conference on Positioning Technology (CPT20O2), 2002.
• [7] PRITSCHOW G., EPPLER C., GARBER T., Influence of the Dynamic Stiffness on the Accuracy of PKM, 3rd Chemnitz Parallel Kinematics Seminar, PKS 2002, Chemnitz, 2002, pp.313-333.
• [8] PRITSCHOW G , EPPLER C., LEHNER W. -D., Ferraris Sensor-The Key for Advanced Dynamic Drives, Annals of the CIRP Vol. 52/1/2003, pp.289-292.
• [9] SOONS J. A., On the Geometric and Thermal Errors of a Hexapod Machine Tools, Proceedings of the First European-American Forum on Parallel Kinematic Machines, 31.08.-01.09.1998, Milano, Itally, pp. 151-170.
• [10] WECK M., STAIMER D., On the Accuracy of Parallel Machine Tools: Design, Compensation and Calibration, 2nd Chemnitz Parallel Kinematics Seminar, PKS 2000, Chemnitz, 2000, pp.73-83.