Formation of coatings with technologies using concentrated energy stream

• Autorzy: Radek Norbert , Kalinowski Artur , Pietraszek Jacek , Orman Łukasz J. , Szczepaniak Marcin , Januszko Adam , Kamiński Janusz , Bronček Jozef , Paraska Olga

Identyfikatory

DOI

10.30657/pea.2022.28.13

• Języki publikacji: EN

Abstrakty

EN

A number of modern surface processing methods use an energy flux. The examples include electro-spark deposition (ESD) and laser beam processing (LBP). The work concerns the study of Cu-Mo coatings deposited on C45 carbon steel, which were then eroded with a laser beam. The analysis included the analysis of the microstructure, measurements of macrogeometry and microhardness, corrosion resistance tests of selected areas after laser treatment. The coatings were applied with ELFA-541 and subjected to Nd:YAG laser treatment with variable laser parameters. The problem presented in the work can be used to extend the knowledge of the areas of application of ESD coatings, especially in sliding friction pairs.

Słowa kluczowe

EN

lectro-spark deposition; laser beam processing; coating; heterogeneous surface

PL

powłoka elektroiskrowa; obróbka wiązką laserową; powłoka; powierzchnia niejednorodna

• Wydawca: Oficyna Wydawnicza Stowarzyszenia Menedżerów Jakości i Produkcji
• Czasopismo: Production Engineering Archives
• Rocznik: 2022
• Tom: Vol. 28, Iss. 2
• Strony: 117--122
• Opis fizyczny: Bibliogr. 35 poz., rys., tab.

Twórcy

autor

Radek Norbert

• Kielce University of Technology, al. 1000-lecia P.P. 7, 25-314 Kielce, Poland

autor

Kalinowski Artur

• Kielce University of Technology, al. 1000-lecia P.P. 7, 25-314 Kielce, Poland

autor

Pietraszek Jacek

• Cracow University of Technology, Al. Jana Pawła II 37, 31-864 Kraków, Poland

autor

Orman Łukasz J.

• Kielce University of Technology, al. 1000-lecia P.P. 7, 25-314 Kielce

autor

Szczepaniak Marcin

• Military Institute of Engineer Technology, 50-961 Wrocław, Poland

autor

Januszko Adam

• Military University of Land Forces, ul. Piotra Czajkowskiego 109, 51-147 Wrocław

autor

Kamiński Janusz

• Warsaw University of Technology, Plac Politechniki 1, 00-661 Warszawa, Poland

autor

Bronček Jozef

• University of Zilina, Univerzitna 1, 01026 Zilina, Slovakia

autor

Paraska Olga

• Khmelnitskiy National University, st. Instytutska 11, 29016, Khmelnickiy, Ukraine

Bibliografia

• 1. Aghajani, H., Hadavand, E., Peighambardoust, N.S., Khameneh-asl, S., 2020. Electro spark deposition of WC–TiC–Co–Ni cermet coatings on St52 steel. Surfaces and Interfaces, 18.10.1016/j.surfin.2019.100392
• 2. Antoszewski, B., Radek, N., Tarelnik, W., Wajs, E., 2005. Electro discharge and laser texturing of sliding face of mechanical seals. IX International Conference HERVICON, Sumy, Ukraine, 15-123.
• 3. Dudek, A., Kolan, C., 2010. Assessments of Shrinkage Degree in Bioceramic Sinters HA+ZrO(2). Mechatronic Systems and Materials: Materials Production Technologies, 165, 25-30.10.4028/www.scientific.net/SSP.165.25
• 4. Dudek, A., Wlodarczyk, R., 2010. Structure and Properties of Bioceramics Layers used for Implant Coatings. Solid State Phenomena, 165, 31-36.10.4028/www.scientific.net/SSP.165.31
• 5. Dwornicka, R., Radek, N., Krawczyk, M., Osocha, P., Pobedza, J., 2017. The Laser Textured Surfaces of the Silicon Carbide Analyzed with the Bootstrapped Tribology Model. METAL 2017, 26th International Conference on Metallurgy and Materials, 1252-1257.
• 6. Dziopa, Z., Koruba, Z., 2015. The impact of launcher turret vibrations control on the rocket launch. Bulletin of the Polish Academy of Sciences-Technical Sciences, 63(3), 717-728.10.1515/bpasts-2015-0083
• 7. Fabiś-Domagała, J., Domagała, M., Momeni, H., 2021. A matrix FMEA analysis of variable delivery vane pumps. Energies, 14(6), art. 1741.10.3390/en14061741Filo, G., Lisowski, E., Domagala, M., Fabis-Domagala, J., Momeni, H., 2018. Modelling of Pressure Pulse Generator with the Use of a Flow Control Valve and a Fuzzy Logic Controller. AIP Conf. Proc., 2029, art. 020015.10.1063/1.5066477
• 8. Gadek-Moszczak, A., Radek, N., Wroński, S., Tarasiuk, J., 2014. Application the 3D Image Analysis Techniques for Assessment the Quality of Material Surface Layer before and after Laser Treatment. Advanced Materials Research., 874, 133-138.10.4028/www.scientific.net/AMR.874.133
• 9. Galin, R., Khina, B., Shaburova, N., Wassilkowska, A., 2021. The formation of zinc coatings in nanocrystallised zinc powders. Technical Transactions, 118, art. e2021009, DOI: 10.37705/TechTrans/e202100910.37705/TechTrans/e2021009
• 10. Guidoni, G., Dudek, A., Patsias, S., Anglada, M., 2005. Fracture behaviour of thermal barrier coatings after high temperature exposure in air. Materials Science and Engineering A, 397(1-2), 209-214.10.1016/j.msea.2005.02.022
• 11. Klimecka-Tatar, D., Pawlowska, G., Szymura, S., 2010. Encapsulation as an effective prevention method of powder oxidation in bonded magnet technology. Ochrona Przed Korozja, 53(11), 585-588.
• 12. Krzysztofik, I., Takosoglu, J., Koruba, Z., 2017. Selected methods of control of the scanning and tracking gyroscope system mounted on a combat vehicle. Annual Reviews in Control, 44, 173-182.10.1016/j.arcontrol.2016.10.003
• 13. Kulis, C., Müller, J., 2020. Indoor air quality improvement in natural ventilation using a fuzzy logic controller. Technical Transactions, 117, art. e2020045, DOI: 10.37705/TechTrans/e202004510.37705/TechTrans/e2020045
• 14. Markovic, S., Arsic, D., Nikolic, R.R., Lazic, V., Hadzima, B., Milovanovic, V.P., Dwornicka, R., Ulewicz, R., 2021. Exploitation Characteristics of Teeth Flanks of Gears Regenerated by Three Hard-Facing Procedures. Materials, 14(15), art. 4203.10.3390/ma14154203834814534361396
• 15. Maruszczyk, A., Dudek, A., Szala, M., 2017. Research into Morphology and Properties of TiO2 - NiAl Atmospheric Plasma Sprayed Coating. Advances in Science and Technology-Research Journal, 11(3), 204-210.10.12913/22998624/76450
• 16. Mysłek A., 2020. Crack propagation analysis in selected railway bogie components. Technical Transactions, 117, art. e2020017, DOI: 10.37705/TechTrans/e202001710.37705/TechTrans/e2020017
• 17. Orman, L. J., 2009. Possibilities of Heat Transfer Enhancement in Automotive Heat Exchangers, Transport Means 2009: 116-119.
• 18. Ostasz, G., Czerwinska, K., Pacana, A., 2020. Quality Management of Aluminum Pistons with the Use of Quality Control Points, Management Systems in Production Engineering, 28(1), 29-33.10.2478/mspe-2020-0005
• 19. Pacana, A., Czerwinska, K., Dwornicka, R., 2019. Analysis of Non-Compliance for the Cast of the Industrial Robot Basis, 28th International Conference on Metallurgy and Materials, 644-650.10.37904/metal.2019.869
• 20. Padgurskas, J., Kreivaitis, R., Rukuiža, R., Mihailov, V., Agafii, V., Kriūkienė, R., Baltušnikas, A., 2017. Tribological properties of coatings obtained by electro-spark alloying C45 steel surfaces, Surface and Coatings Technology, 311, 90-97.10.1016/j.surfcoat.2016.12.098
• 21. Przestacki, D., Kuklinski, M., Bartkowska, A., 2017. Influence of laser heat treatment on microstructure and properties of surface layer of Waspaloy aimed for laser-assisted machining. International Journal of Advanced Manufacturing Technology, 93(9-12), 3111-3123.10.1007/s00170-017-0775-2
• 22. Radek, N., 2010. Production of proper texture on the flat sliding pair surfaces by means of electro-erosion or laser treatment, Mechanik, 83(11), 822-825.
• 23. Radek, N., Konstanty, J., Scendo, M., 2015. The electrospark deposited WCCu coatings modified by laser treatment. Archives of Metallurgy and Materials, 60, 2579-2584.10.1515/amm-2015-0417
• 24. Radek, N., Szczotok, A., Gądek-Moszczak, A., Dwornicka, R., Bronček, J., Pietraszek, J., 2018. The impact of laser processing parameters on the properties of electro-spark deposited coatings. Archives of Metallurgy and Materials, 63, 809-816.
• 25. Rączka, M., Pysz, S., Piotrowski, K., 2020. Guidelines for the manufacture of heavy ductile iron castings. Technical Transactions, 117, art. e2020044. DOI: 10.37705/TechTrans/e202004410.37705/TechTrans/e2020044
• 26. Ryk, G., Etsion, I., 2006, Testing piston rings with partial laser surface texturing for friction reduction. Wear, 261, 792-796.10.1016/j.wear.2006.01.031
• 27. Salmaliyan, M., Malek Ghaeni, F., Ebrahimnia, M., 2017. Effect of electro spark deposition process parameters on WC-Co coating on H13 steel. Surface and Coatings Technology, 321, 81-89.10.1016/j.surfcoat.2017.04.040
• 28. Skrzypczak, L., Skrzypczak-Pietraszek, E., Lamerzarawska, E., Hojden, B., 1994. Micropropagation of Oenothera-Biennis L and an Assay of Fatty-Acids. Acta Societatis Botanicorum Poloniae, 63(2), 173-177.10.5586/asbp.1994.023
• 29. Skrzypczak-Pietraszek, E., Hensel, A., 2000. Polysaccharides from Melittis melissophyllum L. herb and callus. Pharmazie, 55(10), 768-771.
• 30. Styrylska, T., Pietraszek, J., 1992. Numerical Modeling of Non Steady State Temperature Fields with Supplementary Data. Zeitschrift für Angewandte Mathematik und Mechanik, 72(6), T537-T539.
• 31. Szczodrowska, B., Mazurczuk, R., 2021. A review of modern materials used in military camouflage within the radar frequency range. Technical Transactions. 118, art. e2021003, DOI: 10.37705/TechTrans/e202100310.37705/TechTrans/e2021003
• 32. Ulewicz, R., Szataniak, P., Novy, F., 2014. Fatigue Properties of Wear Resistant Martensitic Steel. METAL 2014: 23rd International Conference on Metallurgy and Materials, 784-789.
• 33. Wan, Y., Xiong, D. S., 2008. The effect of laser surface texturing on frictional performance of face seal. Journal of Materials Processing Technology. 197, 96-100.10.1016/j.jmatprotec.2007.06.019
• 34. Zajdel, P., 2021. A suitability assessment using an instrumented impact test of the use of selected structural steel grades on the basis of their changes in response to exposure to fire. Technical Transactions, 118, art. e2021007, DOI: 10.37705/TechTrans/e202100710.37705/TechTrans/e2021007

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).